Trend Professional jigsaw blades five pack, ideal for fine straight cuts in hardwood, softwood, plywood, acrylic & plastics. ...

Trend Professional jigsaw blades five pack, ideal high speed straight clean cuts in hardwood, softwood, kitchen worktops, MDF, multiple glued wood & particle board. ...

Reinforced plastic lift & lock ratchet system. Thread M6 Thread Length 30 mm H 28 mm D 42 mm ...

Three piece kitchen fitters router cutter pack containing three 1/2 inch shank 12.7mm dia. worktop cutters supplied in a storage case. ...

This Worktop True-cut Kitchen Worktop Jig Accessory is perfect for making fast, accurate-angled worktop joints to accommodate for out-of-square walls. A handy tool for the true craftspeople, for the people who take pride in everything they do, just like you. Many modern homes are no longer consigned to the traditional, square 90° corner, & require awkward scribing for a flush male-to-female joint. However, with this device you can simply measure the largest gap, set the jig accessory as the pivot, & recreate the necessary taper for easy routing with the jig itself. Save all that twisting, stretching & leaning to get a workable scribe line with Trend's out-of-sqaure wall accessory. ADAPTABLE ANGLE RANGE Can be used for acute & obtuse wall angles up to 25 degrees out of square COMPATABILITY Works with Trend KWJ 750P Pro, KWJ 900P Pro, KWJ 700, KWJ 700S, KWJ 900 worktop jigs & jigs up to 12mm thick EASY SETUP Fast alignment to the worktop edge ensures correct backset position SIMPLE FOUR STEP PROCEDURE Measure, Mark, Clamp, Cut PRECISION FIT Front edge pivot point alignment ensures the backset is correctly set to match the female cut MULTI-PROFILE Works with any worktop edge profile from square edge to full bullnose QUALITY CONSTRUCTION Made from solid aluminium for maximum lifespan & accuracy INTERLOCKING COMPONENTS Two-part construction with keyed interlock to swivel easily into place & clamp firmly onto the jig without slipping ADJUSTABLE HANDLE High quality spring-loaded handle for fast adjustment & secure lock ...

Tradesman ALL IN ONE work top jig for up to 900mm worktops. ...

Cutter for use with the Leigh Dovetail Jig. D 1/2 inch D 12.7 mm C 9.5 mm OL 57 mm A 108 degrees Shank Diameter 1/4 inch ...

Pack of four interlocking gripping blocks which lock together to allow the workpiece to be held in place when sanding, drilling & finishing. ...

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks. ...

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG). An auger bit & drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Kit
Includes: 1 x Guide bush collar 2 x Face plate template 1 x Mortise template 1 x Template adapter 6 x Spacer Fingers
...