The Sealey emergency jump start has a 22 Ah professional grade, high output battery that has been especially formulated to jump start vehicles. This model features a lightweight high impact casing, which is durable & corrosion proof for easy portability. The fully sealed in battery enables the unit to be stored in any position & battery status LEDs indicate to the user when the battery is at full power or needs to be recharged. Completing this jump starter is a fusible link integrated output cable to give increased protection to the unit, & an on/off switch adds safety & control. ...

The Sealey emergency jump start has a professional grade, high output AGM battery that has been especially formulated to jump start vehicles. This model features a robust case, which is durable & corrosion proof for easy portability. The battery

Includes:: an automatic maintenance charger, with patented microprocessor controller to enable speedy charging & thermal runaway protection. Completing this jump starter is an audible warning system (AWS) which signals if the unit has been turned on for too long without being connected to a battery, & easy cable & clamp storage to ensure the unit is compact & tidy when not in use.

...

Fitted with safety overload valve & manufactured in the EU. All steel, one-piece base, reservoir & pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump & telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available. ...

Fitted with safety overload valve & manufactured in the EU. All steel, one-piece base, reservoir & pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump & telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available. ...

The Sealey Industrial hydraulic pipe bender is suitable for bending pipes up to 180° (3 x 60° bends) & this unit is also supplied with eight interchangable pipe dies. The integrated 15 tonne ram utilises compact hydraulics, & the two-speed hydraulic pump gives fast positioning of pipe in dies with the power to bend up to 75mm pipes. Completing the product is a high quality design & manufacture, & this product is packaged heavy wooden crate for easy transportation. ...

Temporary expanding barriers unfold from 230mm to 2.5m long fully extended. 380mm Wide legs at either end, which can both be filled with water via 20mm screw cap on each one, for greater weighted stability. Each side has red & silver reflective criss-crossing strips for maximum visibility across the whole barrier. Small hooks at top & bottom of each leg to attach either signage or tape around perimeter of the barrier. Each leg has 2 x & Oslash;50mm holes in to allow several barriers to be attached end to end, or simply secured in place by various means (fixings not included). Single 8mm hole through each leg allows bolting them together or in place (fixings not included). & Oslash;35mm Hoop on top of each leg for a cordon or tape from end to end, for greater visibility or security. Sturdy yet flexible material allows for quick & easy stowing. ...

The Sealey PFC301 engine crane is a fixed crane with parallel legs designed to accommodate a standard sized pallet & features a heavy duty forged hook. This model can lower rapidly with no load, whilst providing smooth, controlled lowering under load conditions & the beam can be set in four positions, with a capacity of 2000kg at its full extension of 1870mm. Completing this crane is two pumps one for slow, safe lifting & a quick lift pump making this unit ideal for workshop use. Lifting Capacity in Position 1: 3000kg Lifting Capacity in Position 2: 2500kg Lifting Capacity in Position 3: 2300kg Lifting Capacity in Position 4: 2000kg Max. Lift Ht at Jib Position 1: 2720mm Max Lift Ht at Jib Position 2: 2850mm Max Lift Ht at Jib Position 3: 2950mm Max Lift Ht at Jib Position 4: 3050mm Max Length of Jib Position 1: 1430mm Length of Jib Position 2: 1580mm Length of Jib Position 3: 1730mm Length of Jib Position 4: 1870mm ...

This tool produces accurate automotive SAE flares on 3/16" pipes. The lightweight body makes it absolutely ideal for splicing in replacement sections of brake pipe on-vehicle. It is suitable for copper, cupro-nickel & steel pipes. ...

The Sealey PH20 Crane is designed to lift 2000kg at 930mm jib extension, along with the bottle jack type hydraulic unit for economy. This crane folds for easy storage, freeing valuable workshop space when not in use. Tested to 25% overload. ...

Perfect for heavy commercial, industrial & workshop use the Sealey 3 Tonne Fixed Frame Crane benefits from extendable heavy-duty legs for enhanced stability, particularly when operating at maximum jib extensions. Lifting Capacity Position 1: 3000kg Lifting Capacity Position 2: 2000kg Lifting Capacity Position 3: 1500kg Lifting Capacity Position 4: 1000kg Max. Lift Ht at Max. Jib Ext. Position 1: 1880mm Max. Lift Ht at Max. Jib Ext. Position 2: 1970mm Max. Lift Ht at Max. Jib Ext. Position 3: 2010mm Max. Lift Ht at Max. Jib Ext. Position 4: 2220mm Length of Jib Position 1: 1200mm Length of Jib Position 2: 1400mm Length of Jib Position 3: 1610mm Length of Jib Position 4: 1820mm ...