The Sealey BSL103 CVJ boot tool installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft, thus saving time & any potential damage to the CV joint. While fitting boot, the tool can be removed from the air line when pressurised (arms open) & will maintain pressure until the release button is pressed. This model is suitable for cars & light commercial vans. ...

Compact device which accurately tests battery, cranking & alternator. No heat, no sparks & no misdiagnosis. Just key in the battery rating from the top of the battery & results are displayed on an LED control panel. No internal battery & will test batteries with a residual charge of just 7V. ...

Robust & simple-to-use design offers a full in-vehicle diagnosis of the vehicle battery, starter motor & alternator in seconds. Professional tool supports all 12V batteries including standard Lead-Acid, VRLA, GEL plus AGM & EFB found on all Start/ Stop vehicles. The in-vehicle test mode allows diagnosis of battery health, state of charge, internal resistance, cranking voltage & a comprehensive charging system voltage at rest & under load. No heat, no sparks & no misdiagnosis. Equipped with reverse polarity protection & a battery temperature compensation feature. A 4-Line/16 character LCD display gives easy to follow prompts & accurate results. Fitted with a heavy-duty rubber protection cover. ...

Professional diagnosis of battery & alternator faults with the added facility to print the results. Test battery condition with as little as 1.5V of residual charge. No heat, no sparks & no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest & under load to determine condition of the alternator. Suitable for use on motorcycles, cars (including start/stop) & commercial vehicles. Connect & follow the prompts on the 2-line/16 character LCD screen for straightforward answers. Rugged construction. Supplied in carry-case with batteries, two rolls of printing paper & instruction manual. ...

Professional diagnosis of battery & alternator faults with the added facility to print the results. Tests batteries up to 3000 CCA* SAE with as little as 1.5V of residual charge. No heat, no sparks & no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest & under load to determine condition of the alternator. Suitable for use on motorcycles, cars (including start/stop), & commercial vehicles. Connect & follow the prompts on the 4-line/16 character LCD screen for straightforward answers. Supplied in carry-case with batteries, two rolls of printing paper, PC software & instruction manual. ...

The BT91/7PF is an American style battery drop tester with its load applied by an internal switchgear which means no sparking. This model is suitable for 6 & 12V batteries applies load across cells & measures output on meter, providing accurate indication of battery voltage & faulty or short circuited cell. This tester also

Includes:: polarity protected cables to make it impossible to damage the unit by incorrect connection.

...

This Battery Carrier has been designed with a tubular steel handle & comfort grip. ...

Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together & will stand upright for easy storage. BS Approved. ...

Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars & vehicles with low ground clearance. Attach to standard car ramps with a minimum width of 195mm. Suitable for use with Sealey CAR2000 ramps. (MM code 020112007) ...

A pair of car ramps from Sealey. Each ramp has a 1.5 Tonne capacity, providing a 3 Tonne capacity for the pair. Manufactured from durable polypropylene. Suitable for professional or serious DIY applications. ...