The scheppach Chisa 7.0 is a classic floor standing hollow chisel mortising machine. Due to its robust construction, this machine is stable in use & offers the best results at a fantastic price. Equipped with a useful cabinet storage base & facility to reverse the headstock for mortising door locks, the Chisa 7.0 is the ideal choice for both professional & amateur workshops. The main headstock, table & vertical machine column are all made in solid cast iron, resulting in a stable, vibration free mortising machine. Where necessary, all castings are precision machined on a dovetail slide principle for smooth controlled movement when operating. Adjustable guides ensure that any possible movement from years of use can be taken up so that the machine always remains as accurate as the day it was purchased. Powered by a 1 HP quiet running induction motor, the machine is capable of mortising up to 25 mm (1 inch) in soft woods & 20 mm (3/4 inch) in hard wood. 200 mm (8 inch) capacity is possible under the chisel. A steel cabinet floor stand which serves as a storage cabinet for tooling comes as standard. Comes complete with 3 Chisel & Bits
- 1/4, 1/2 & 5/8.
...

The Scheppach dms 900 woodturning lathe is designed with the committed artisan in mind as well as the professional who requires a machine with an excellent

Specification at a competitive price. Built of cast iron the dms series lathes are made to last. Powered by a very quiet running, high torque 0, 75 HP induction motor, it gives ten speeds ranging from 500 rpm 2, 100 rpm & is therefore ideal for small diameter spindle work through to large bowl turning. Speed selection is made by a conveniently placed lever. Both the headstock, tailstock & lathe bed are made from solid cast iron which has been accurately machined to allow for smooth movement & minimal levels of vibration. The pivoting headstock turns 360° & locks to facilitate outboard turning. Unique to the scheppach dms series is the clockwise & anticlockwise spindle rotation which offers the advantage of positioning the tool rest to the left or right when swivelling the headstock. The L & R turning facility also produces perfect sanding results on the finished workpiece irrespective of the lay of the wood grain. The tailstock is bored to allow for long hole boring when making table & standard lamps. Fitted with the industry standard 1“ x 8 tpi main spindle, there will never be a need to worry about sourcing a wide range of accessories. The Scheppach dms 900 will give satisfaction from the day of purchase & long into the future. Standard equipment -Stable, torsion resistant grey cast iron construction, plane, polished turning bed, cast iron spindle stock, tailstock & tool rest, toolrest & tailstock with eccentric clamp, slewable spindle stock, face plate, drive centre 4-point, following centre point, 10 spindle speeds, Poly V belt drive, wise & anticlockwise rotation.

...

The Scheppach DP13 Bench Drill Press is perfect for drilling in a variety of materials including wood, metal & plastic. It is ideally suited to light workshop use & would be perfect for a workshop with limited floor space. It is constructed from sturdy cast iron to reduce vibration, increase stability & extend the tools life. The 250W induction motor is fan cooled & produces 5 separate speeds. There is a cast iron table for rigidity, thermal overload protection, a 13mm keyless chuck & chuck guard as well as slide table adjustment. Scheppach Part Number: 4906803918 ...

The Scheppach DS405 Vario Scroll Saw puts you firmly in charge of the machines speed. The speed of the saw is adjustable by simply turning a knob & the continual variability of the speed makes this machine perfect for working on a variety of materials. All the main & most important functions of the DS405 Vario Scroll Saw are right in the eye line of the user, fitted at the end of the parallel arm. The parallel arm itself & the large, planed cast iron table (which is adjustable to 45 degrees left & right) make user safety paramount. There is a quick, intuitive & convenient tension system that makes the changing of the sawblade quick & simple. The integrated work lamp & handy transparent sawblade guard means maximum visibility & safety for the user. There is even an integral storage box included with the machine
- ideal for storing craft accessories or spare machine parts.
...

The superb Duo 7.0 from Scheppach makes a fantastic addition to any woodworking workshop. A 2-in-1 machine, the Duo 7.0 is ...

The new Forsa 4.0 combines all the precision features of the Precisa 6.0 classic sawbench with added advantages of a dedicated integrally mounted sliding beam; choice of added sliding table carriage according to size of work pieces; & still offering an excellent 107 mm depth of cut for solid timbers without the necessity of having to remove the scoring blade (if fitted). In short the best of both worlds
- a classic precision circular sawbench & a 1.6 m panel sizing saw
- in one compact unit. It boasts cutting height at 90° max. 107mm, at 45° max. 75mm & patented cast-iron sawing unit, with two large swinging segments. A sturdy machines cast-iron table & solid, welded torsion-resistant frame. Two fixed hand wheels made from cast-iron make for easy height & angle adjustment. (Scoring unit not shown in this image). Pre-scoring attachment: Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315mm sawblade
- no conversion necessary Retract the scoring blade under the bench when not in use-removal is not necessary Height adjustment of the scoring sawblade from 0-4mm With scoring blade pivot the main sawblade to 45 degrees TCT scoring blade & Oslash; 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting Data: Cutting height at 90° max. 107mm, at 45° max. 75mm Table stroke / max. cross-cut travel: 1600 mm Cutting width with ripping fence: 440 mm Cutting width with table width extension 1080 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1170 mm; without pre-scoring attachment 1270 mm Standard Equipment: Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 440 x W 670 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800 mm long Push stick, push handle, assembly tools Suction hose- 50& Oslash; mm, sawblade cover Phase inverter (400v)


...

There are times when you may just need that extra cutting capacity without the need for a large panel sizing saw. Thats where the Scheppach Forsa 4.1 resolves your dilemma. All the outstanding features of our Forsa 4.0 but with that extra panel sizing capacity up to 2, 100 mm. Still in harmony with the small to medium sized workshop but offering in excess of 2m cutting capacity when you need it. Cutting height at 90° max. 107mm, at 45° max. 75mm. Patented cast-iron sawing unit with two large swinging segments & sturdy machined cast-iron table. The frame is solid, welded & torsion-resistant & two fixed hand wheels made from cast-iron make for easy height & angle adjustment. Pre-scoring attachment Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315 mm saw blade
- no conversion necessary Retract the scoring blade under the bench when not in use
- removal is not necessary Height adjustment of the scoring sawblade from 0-4mm With scoring blade pivot the main sawblade to 45 degrees TCT-scoring blade & Oslash; 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting Data: Cutting height at 90° max. 107mm, at 45° max. 75 mm Table stroke / max. cross-cut travel: 2100 mm Cutting width with ripping fence 440 mm Cutting width with table width extension: 1080 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1170 mm; without pre-scoring attachment: 1270 mm Standard Equipment: Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 440 x W 670 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800mm long Push stick, push handle, assembly tools Suction hose & Oslash; 50mm, sawblade cover

...

The Forsa 8.0 is part of Scheppachs range of dedicated panel sizing saws. This one provides 2600mm length of stroke. Simple classic lines, robust construction, perfect precision cutting, all harmonise together in this superb machine. With a Scheppach Forsa panel saw you do not have to fear competition from much more expensive machines. Cutting height at 90° max. 107 mm, at 45° max. 75 mm Patented cast-iron sawing unit with two large swinging segments Sturdy machined cast-iron table Solid, welded & torsion-resistant frame Two fixed hand wheels made of cast-iron for height & angle adjustment Pre-scoring attachment. Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315 mm saw blade- no conversion necessary Retract the scoring blade under the bench when not in use, removal is not necessary Height adjustment of the scoring saw blade from 0-4 mm With scoring blade pivot the main saw blade to 45 degrees TCT-scoring blade ø 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting height at 90° max. 107 mm, at 45° max. 75 mm Table stroke / Max. cross-cut travel 2600 mm Cutting width with ripping fence 560 mm Cutting width with table width extension 1300 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1350 mm; without pre-scoring attachment 1470 mm Cutting depth behind the sawblade 2670 mm Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 850 x W 400 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800 mm long Push stick, push handle, assembly tools Suction hose-ø 50mm, sawblade cover Phase inverter (400V) ...

The HA1000 surpasses all wet-dry extractors when it comes to suction power of wood dust in the workshop in spite of it being the smallest & most cost-efficient unit in the Scheppach range of extractors. Through its compact design it is portable & can be used anywhere. ...

The Scheppach HL 650 6.5 Ton Log Splitter is the ideal solution to all your log splitting needs. If you use logs to fuel a wood burning stove
- a machine like the HL650 is invaluable. This unit is capable of cutting up to 100 logs in an hour, all while remaining quiet & efficient. The safety of this machine is un-paralleled thanks to the easy two handed operation, which minimises the possibility of injury. The compact

Dimensions mean it is easy to store & transport, the robust components require little maintenance. The reinforced gear pump generates 6.5 tons of pressure meaning it is perfect to split all kinds of wood, including harder types. The 2200W motor develops 2850 revolutions a minute & a splitting speed of 3.2 cm/s.


...