The new Forsa 4.0 combines all the precision features of the Precisa 6.0 classic sawbench with added advantages of a dedicated integrally mounted sliding beam; choice of added sliding table carriage according to size of work pieces; & still offering an excellent 107 mm depth of cut for solid timbers without the necessity of having to remove the scoring blade (if fitted). In short the best of both worlds
- a classic precision circular sawbench & a 1.6 m panel sizing saw
- in one compact unit. It boasts cutting height at 90° max. 107mm, at 45° max. 75mm & patented cast-iron sawing unit, with two large swinging segments. A sturdy machines cast-iron table & solid, welded torsion-resistant frame. Two fixed hand wheels made from cast-iron make for easy height & angle adjustment. (Scoring unit not shown in this image). Pre-scoring attachment: Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315mm sawblade
- no conversion necessary Retract the scoring blade under the bench when not in use-removal is not necessary Height adjustment of the scoring sawblade from 0-4mm With scoring blade pivot the main sawblade to 45 degrees TCT scoring blade & Oslash; 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting Data: Cutting height at 90° max. 107mm, at 45° max. 75mm Table stroke / max. cross-cut travel: 1600 mm Cutting width with ripping fence: 440 mm Cutting width with table width extension 1080 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1170 mm; without pre-scoring attachment 1270 mm Standard Equipment: Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 440 x W 670 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800 mm long Push stick, push handle, assembly tools Suction hose- 50& Oslash; mm, sawblade cover Phase inverter (400v)


...

There are times when you may just need that extra cutting capacity without the need for a large panel sizing saw. Thats where the Scheppach Forsa 4.1 resolves your dilemma. All the outstanding features of our Forsa 4.0 but with that extra panel sizing capacity up to 2, 100 mm. Still in harmony with the small to medium sized workshop but offering in excess of 2m cutting capacity when you need it. Cutting height at 90° max. 107mm, at 45° max. 75mm. Patented cast-iron sawing unit with two large swinging segments & sturdy machined cast-iron table. The frame is solid, welded & torsion-resistant & two fixed hand wheels made from cast-iron make for easy height & angle adjustment. Pre-scoring attachment Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315 mm saw blade
- no conversion necessary Retract the scoring blade under the bench when not in use
- removal is not necessary Height adjustment of the scoring sawblade from 0-4mm With scoring blade pivot the main sawblade to 45 degrees TCT-scoring blade & Oslash; 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting Data: Cutting height at 90° max. 107mm, at 45° max. 75 mm Table stroke / max. cross-cut travel: 2100 mm Cutting width with ripping fence 440 mm Cutting width with table width extension: 1080 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1170 mm; without pre-scoring attachment: 1270 mm Standard Equipment: Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 440 x W 670 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800mm long Push stick, push handle, assembly tools Suction hose & Oslash; 50mm, sawblade cover

...

The Forsa 8.0 is part of Scheppachs range of dedicated panel sizing saws. This one provides 2600mm length of stroke. Simple classic lines, robust construction, perfect precision cutting, all harmonise together in this superb machine. With a Scheppach Forsa panel saw you do not have to fear competition from much more expensive machines. Cutting height at 90° max. 107 mm, at 45° max. 75 mm Patented cast-iron sawing unit with two large swinging segments Sturdy machined cast-iron table Solid, welded & torsion-resistant frame Two fixed hand wheels made of cast-iron for height & angle adjustment Pre-scoring attachment. Alternatively, the scoring unit with its own separate & connectable drive unit (0.8k W) can be obtained Use of the scorer with the standard 315 mm saw blade- no conversion necessary Retract the scoring blade under the bench when not in use, removal is not necessary Height adjustment of the scoring saw blade from 0-4 mm With scoring blade pivot the main saw blade to 45 degrees TCT-scoring blade ø 120 x 20 mm; adjustable from 2.8 to 3.6 mm Cutting height at 90° max. 107 mm, at 45° max. 75 mm Table stroke / Max. cross-cut travel 2600 mm Cutting width with ripping fence 560 mm Cutting width with table width extension 1300 mm Cutting depth in front of sawblade with sliding cross table & with pre-scoring attachment 1350 mm; without pre-scoring attachment 1470 mm Cutting depth behind the sawblade 2670 mm Cross-cutting gauge, swinging range 2 x 60° Table length extension, L 850 x W 400 mm Ripping fence with magnifying glass, fine-adjustment, & reversible fence rail, 800 mm long Push stick, push handle, assembly tools Suction hose-ø 50mm, sawblade cover Phase inverter (400V) ...

The HA1000 surpasses all wet-dry extractors when it comes to suction power of wood dust in the workshop in spite of it being the smallest & most cost-efficient unit in the Scheppach range of extractors. Through its compact design it is portable & can be used anywhere. ...

The Scheppach HL 650 6.5 Ton Log Splitter is the ideal solution to all your log splitting needs. If you use logs to fuel a wood burning stove
- a machine like the HL650 is invaluable. This unit is capable of cutting up to 100 logs in an hour, all while remaining quiet & efficient. The safety of this machine is un-paralleled thanks to the easy two handed operation, which minimises the possibility of injury. The compact

Dimensions mean it is easy to store & transport, the robust components require little maintenance. The reinforced gear pump generates 6.5 tons of pressure meaning it is perfect to split all kinds of wood, including harder types. The 2200W motor develops 2850 revolutions a minute & a splitting speed of 3.2 cm/s.


...

The Scheppach HL1200 12 Ton Log Splitter is a powerful & robust machine. It is especially designed to be torsion-resistant & is constructed from painted steel. Optimum safety is achieved thanks to the easy two-hand operation & there is a low-maintenance 4-synthetic guide. There is a large & stable splitting blade & there engine speed is low, producing little noise. The splitting stroke is infinitely adjustable & you can split short or long timber. ...

The Scheppach HL450 4 Ton Log Splitter is the quick, simple & stress free answer to splitting logs up to 250mm in diameter. The HL450 is heavy duty, robust & efficient, & is capable of splitting up to 100 logs in an hour! If you want to take the hard work out of splitting your logs or firewood this is the machine for you, it is the perfect accompaniment to a wood burning stove, taking the financial strain out of supplying firewood. With its easy & safe 2 handed operation & the powerful 1500W motor providing enough power to split logs up to & including 250mm x 370mm at an impressive rate of speed. ...

The Scheppach HL520 5 Ton Logsplitter is an extremely quiet & easy to use machine, the 2200W (3hp) motor is capable of creating 5 tons of force. You can split any kind of log with this machine, including green & seasoned, & the machine is capable of splitting 100 logs in an hour. This unit is highly adaptable to different situations & can cut logs while on the ground or while mounted on the stand (with wheels). The HL520 is very low maintenance thanks to the sealed hydraulic cylinder & cut logs up to 25cm in length & 52cm in diameter. ...

The Scheppach HMS 2000 Planer/ Thicknesser is a compact, easy to use & handy planer that would be ideal for the workshop where space is at a premium. Alternatively it would be the ideal mobile unit for a tradesman. It features an sturdy & accurate cast planer & an easy to use pivoting fence. The maximum surface planing width this machine is capable of is an impressive 204mm, with a maximum chip removal of 2mm when surface planing. It has a swift feed rate of 6.3m/min & a clearance height & width of 120/204mm. Planing is taken care of by the high quality HS-planer knives & there is a chip extraction hood with an integrated micro switch. The tiltable aluminium fence is easily adjustable & has a large capacity & the machine itself has a CE certification. ...

The HP1300 from Scheppach is a compact, lightweight & robust plate compactor suitable for professional & DIY use. Used to prepare land for patio laying, extension building, landscaping & more, the HP1300 compacts material with an impressive 13000N of force to depths of up to 35cm. It is a high performance, petrol powered machine that is ergonomically designed & easy to use, featuring an comfortable to use handle & durable frame. It also features hard wearing plastic wheels that allow uses to move the compactor around the worksite quickly & easily. These wheels also help users move the machine into storage when it isnt in use. ...