A Makita 18V LXT BL Brushless Cordless Reciprocating Saw. This product comes with 2 x 5.0 Ah batteries & a DC18RC charger in a carry case. ...

The Makita DJR187 is a high power, cordless reciprocating saw powered by 18V Li-ion battery & has been developed for higher cutting efficiency, & to be more compact & lightweight by adopting vertical crank mechanism & Brushless DC motor. The device features tool-less blade change, as well as tool-less shoe adjustment, for ease of use whilst the ergonomically designed handle provides comfortable & efficient use. The saw also features an LED job light. Electronic 2-speed selection is offered with a trigger providing variable speed control. The DRJ187Z also features a lock-off lever, electric brake & retractable joist hook. ...

A Makita 18V LXT Brushless Cordless Top Handle Jig Saw complete with 3 Orbital Settings Plus Straight Cutting & Dual LED Lights. ...

The Makita DKP181 is an 82mm cordless planer powered by 18V LXT Li-Ion battery with a brushless motor, electronic brake & soft start. The design of the unit

Includes:: a base with 3 chamfering grooves as well as on-tool storage for hex wrench. A spring-loaed stand elevates the base to protect the blades & workpiece whilst there is an easy blade setting system for fast blade installation. The DKP181Z also features left & right chipping ejection. The depth of cut can be easily adjusted by simply turning the knob on the front of the tool. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for optimum operation.

...

Twin 18V Brushless Lawn Mower 46cm Steel Deck with 2x 6.0 Ah batteries & DC18RD Twin Port charger ...

The Makita DLW140Z is a 355mm (14") Cordless Portable Cut-off Saw powered by two 18V Li-ion batteries in series. It features a brushless motor with electric brake & soft start. It's easy to operate, providing tool-less adjustment of the guide plate & tool-less wheel change. The DLW140Z also has a quick release vice. For safe use, the DLW140Z has a large spark guard, pin locking device & a load status indicator, as the load on the motor increases, the number of illuminated LED’s increases. When the motor is operated with excessive load, all LEDs on the load status indicator will blink. ...

The DLX2131 kit

Includes:: two of the most popular cordless Makita tools into one kit & gives you the ability

...

The DLX2455TJ is a compact & lightweight cordless & brushless Combo Kit, comprising DHP486Z 18V LXT Combi Drill & DTD172Z 18V LXT Impact Driver, complete with 2 x 5.0 Ah batteries & fast charger, supplied in a Makpac Case. The DHP486Z & DTD172Z are powered by 18V Li-ion LXT slide type battery, to supply energy to the powerful 18V brushless motor. The DHP486Z is a Combi Drill, with variable speed controlled by trigger & 2 mechanical gears, to deliver 0 to 550 rpm on low speed & 0 to 2, 100 rpm on high speed, 0 to 8, 250 blows per minute on low speed & 0 to 31, 500 blows per minute on high speed & a maximum fastening torque 65 Nm soft joint & 130 Nm hard joint for a wide range of drilling, fastening & hammer drilling applications. The DHP486Z is equipped with electric brake, forward & reverse rotation, all metal gear construction, metal gear housing, 2 mechanical gears & 21 torque settings plus drill mode. The DHP486Z is fitted with twin LED job lights, single sleeve keyless chuck for quick & easy bit installations & removals with one hand & depth gauge for drilling consistency. Maximum capacity in wood 76mm, masonry 16mm, steel 13mm. The DTD172Z is an Impact Driver with an overall length of 114mm & slim tool head to enable easy screw driving in tight corners & confined spaces, with variable speed controlled by trigger to deliver 0 to 3, 800 blows per minute (maximum), 0 to 2, 600 blows per minute on medium & 0 to 1, 100 blows per minute on low, 290 W maximum output & 180 Nm maximum fastening torque. The DTD172Z is equipped with electric brake, electronic 4 stage impact power selection, anti bit-wobbling structure, reverse switch, quick mode switching button & one touch bit installation. The DTD172Z is fitted with a 6.35mm / 14;” hex driving shank & twin LED job lights. Capacity standard bolt M5 to M16, high tensile bolt M5 to M14, machine screw M4 to M8, coarse thread (length) 22 to 125mm. The DHP486Z & DTD172Z both feature battery protection circuit designed to protect the battery from damages due to overheating, over-discharge & overload current. The DHP486Z & DTD172Z are not compatible with G-Series batteries. ...

The DLX2460TJ is a 2 piece brushless Combo Kit, comprising DHP187Z cordless Hammer Driver Drill & DTD153Z cordless Impact Driver, powered by 18V Li-ion LXT slide type battery & equipped with powerful 18V brushless motors. DLX2460TJ is supplied complete with 2 x BL1830B 3.0 Ah batteries & charger, in a Makpac case. The DHP487Z is a compact Hammer Driver Drill, 164mm in length, with variable speed control to deliver up to 1, 700 rpm, 25, 500 bpm & 40 Nm maximum fastening torque for a wide range of drilling, fastening & hammer drilling applications. The DHP487Z is equipped with 2 mechanical gears; high speed mode for speedy drilling in light duty applications & low speed mode for heavy duty applications requiring high torque, single sleeve keyless chuck for quick & easy bit installations & removals, 20 torque settings plus drill mode for added fastening control, electric brake for increased operator safety & twin LED job lights to illuminate the work area. The DHP487Z has a 13mm maximum capacity in steel, 36mm in wood & 13mm in masonry. The DTD153Z is a compact & lightweight Impact Driver, with variable speed controlled by trigger to deliver up to 3, 400 rpm, 3, 600 ipm & 170 Nm maximum fastening torque for a wide range of fastening applications. The DTD153Z is equipped with forward & reverse rotation, LED job light to illuminate the work area, electric brake for increased operator safety & a convenient one touch 14;” hex chuck for quick & easy bit installations & removals. The DTD153Z has an aluminium hammer case for increased durability & features battery protection circuit designed to protect the battery from damages due to overheating, over-discharge & overload current. The DTD153Z has a M5 to M16 maximum capacity standard bolt, machine screw M4 to M8, high tensile bolt M5 to M14 & coarse thread (length) 22mm to 125mm. The DLX2460TJ features battery protection circuit designed to protect the battery from damages due to over-discharge, overheating & overload current. The DLX2460TJ is not compatible with G-Series batteries. ...

The DLX2507TJ is a compact & lightweight cordless 18V Li-ion LXT 2 piece combo kit, comprising DHP489Z 18V Combi Drill & DTD153Z 18V Impact Driver, supplied with 2 x 5.0 Ah batteries & fast charger. The DHP489Z compact & lightweight cordless Combi Drill, is powered by 18V Li-ion LXT slide type battery, to supply energy to the powerful 18V brushless motor, with variable speed, to deliver 0 to 1800 rpm in high speed mode & 0 to 550 rpm in low speed mode, 0 to 27000 blows per minute in high speed mode & 0 to 8250 blows per minute in low speed & 40 Nm maximum fastening torque on soft mode & 73 Nm on hard mode for a wide range of drilling, fastening & hammer drilling applications. The DHP489Z is equipped with trigger lock function, conveniently located reverse switch, metal gear housing, convenient 13mm keyless chuck with single metal sleeve, twin LED job light with pre-glow & afterglow & electric brake. The DHP489Z has 21 torque settings plus drill mode for added fastening control, mechanical 2 speed & is capable of drilling up to 1” ship auger in high speed mode into 2x lumber. 16mm maximum capacity in masonry, 13mm maximum capacity in steel, 38mm maximum capacity in wood. The DTD153Z is a compact & lightweight, cordless Impact Driver, powered by 18V Li-ion LXT slide type battery, to supply energy to the powerful 18V brushless motor, with variable speed controlled by trigger to deliver up to 3, 400 rpm, 3, 600 ipm & 170 Nm maximum fastening torque for a wide range of fastening applications. The DTD153Z is equipped with forward & reverse rotation, LED job light, electric brake & a convenient one touch 14;” hex chuck. The DTD153Z has an aluminium hammer case & features battery protection circuit. The DTD153Z has a maximum capacity standard bolt M5 to M16, machine screw M4 to M8, high tensile bolt M5 to M14 & coarse thread (length) 22mm to 125mm. The DLX2507TJ is not compatible with G-Series batteries. ...