Cordless nibbler up to 1.6 mm. Compact & curve-compatible nibbler for roof & façade construction. Precise cuts in trapezoid & corrugated sheet metals & profiles. 40 m of cutting in 0.8 mm trapezoid sheet metal with one battery. 1.5 m/min cutting speed for excellent work progress. Variable cutting speed due to electronically adjustable speed control. Multi Volt interface. Cordless tool can be operated with all FEIN Li-ion batteries (12-18 V). Brief overlapping area up to 2.6 mm. Optimum handling due to extremely slim gearbox head. Comfortably light weight. Quick IN quick change system for die & punch. Rotating punch for a service life which is now up to 30% longer. Cutting direction setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head. Battery voltage 18V Strokes 1300rpm Cutting speed 1.5 m/min Weight without battery 1.6kg Steel up to 400 N/mm-square 1.6mm Steel up to 600 N/mm-square 1.0mm Steel up to 800 N/mm-square 0.7mm Non-ferrous metals up to 250 N/mm-square 2.5mm Cutting width 5mm Immersion & Oslash; with die 22mm Rad. of smallest curve (inside/outside)30/35 mm ...

Cordless sheet metal shears up to 1.6 mm. Ergonomic, curve-compatible cordless sheet metal shears for cutting & trimming thin sheets. Outstanding ergonomics through compact & simple construction for optimal mobility of the shears. Good curve precision with low sheet-metal distortion. Four-fold reversing blade for clean & burr-free cutting with low operating costs. Multi Volt interface. Cordless tool can be operated with all FEIN Li-ion batteries (12-18 V). Battery voltage 18V Strokes 2 200-3 700 rpm Cutting speed 6
- 9 m/min Weight without battery 1, 4kg Steel up to 400 N/mm-square 1, 6 mm Steel up to 600 N/mm-square 1, 2mm Steel up to 800 N/mm-square 1, 0mm Non-ferrous metals up to 250 N/mm-square 2, 0mm Rad. of smallest curve 15 mm
...

Drill (battery-powered) up to 10 mm. Compact single-speed drill with speed stability (battery-powered), up to 10 mm in steel for on-site installation work. Particularly flat & slim design with excellent width across corners for installation work even in tight spaces & corners. Outstanding quality battery-powered drill with high concentricity for precise drilling results. Brushless FEIN Power Drive motor, fully encapsulated & dust-protected with 30% higher efficiency & long service life. Battery voltage 18V Speed, full load 0-1100rpm Speed, no load 0-1250rpm Torque at max. output power 11 Nm Stall torque 19 Nm Capacity in steel & Oslash; 10mm capacity in & Oslash; stainless steel 10mm Capacity in alu & Oslash; 15mm Capacity in wood & Oslash; 30mm Tapping M6 Collar & Oslash; 43mm Drill chuck clamping width 1.5-13mm Thread of spindle 1/2-20UNF ...

Drill (battery-powered) up to 13 mm. Universal two-speed drill (battery-powered), up to 13 mm with ideal speed range for steel & stainless steel. Mechanical two-speed gearbox for optimum speed adjustment for a wide range of uses. Outstanding quality battery-powered drill with high concentricity for precise drilling results. Brushless FEIN Power Drive motor, fully encapsulated & dust-protected with 30% higher efficiency & long service life. Battery voltage 18V Speed, full load 0-500/0-1500rpm Speed, no load 0-580/0-1760rpm Torque at max. output power 24/8 Nm Stall torque 39/13 Nm Capacity in steel & Oslash; 13/10mm capacity in & Oslash; stainless steel 13/10mm Capacity in alu & Oslash; 16/10mm Capacity in wood & Oslash; 37/27mm Tapping M10 Collar & Oslash; 43mm Drill chuck clamping width 1.5-13mm Thread of spindle 1/2-20UNF ...

Drill (battery-powered) up to 6 mm. Fast-running single-speed drill (battery-powered) with excellent speed stability, up to 6 mm in steel in metal construction. Particularly flat & slim design with excellent width across corners for installation work even in tight spaces & corners. Outstanding quality battery-powered drill with high concentricity for precise drilling results. Brushless FEIN Power Drive motor, fully encapsulated & dust-protected with 30% higher efficiency & long service life. Battery voltage 18V Speed, full load 0-2 900rpm Speed, no load 0-3350rpm Torque at max. output power 4 Nm Stall torque 7 Nm Capacity in steel & Oslash; 6mm capacity in & Oslash; stainless steel 6mm Capacity in alu & Oslash; 10mm Capacity in wood & Oslash; 20mm Collar & Oslash; 43 mm Drill chuck clamping width 0.5-10mm Thread of spindle 1/2-20UNF ...

Cordless slitting shears up to 1.6 mm. Easy-to-use, curve-compatible cordless slitting shears for distortion-free cuts & cut-outs in sheet metal up to 1.6 mm. Rapid work progress due to excellent view of the cutting line through the open-fronted cutting head. Left & right curve cuts & distortion-free cutting possible with just one continuous chip. Quick IN for rapid toolfree blade changing, with no further adjustment required. Multi Volt interface. Cordless tool can be operated with all FEIN Li-ion batteries (12-18V). Battery voltage 18V Strokes 2 200-3 500 rpm Cutting speed 5
- 8 m/min Weight without battery 1, 2kg Steel up to 400 N/mm-square 1, 6 mm Steel up to 600 N/mm-square 1, 2 mm Steel up to 800 N/mm-square 0, 8 mm Non-ferrous metals up to 250N/mm-square 2, 0 mm Cutting width 5, 0 mm Rad. of smallest curve 90 (30)&sup 1; mm (with blade for curves) Immersion & Oslash;15 (8)&sup 1; mm
...

Cordless thread drill up to M 10. Fast, accurate thread drill with reversing gear for shorter working times. Unique speed thanks to reversing gear for automatic reversal of rotation direction when retracting drill spindle from threaded hole. Rapid return action at 670 rpm for shorter cycle times. Outstanding precision due to clearance-free connection of drill shaft & threaded chuck with B12 taper mounting for high concentricity. Positive fit of thread drill in chuck for the best results. FEIN sensitive handle for applying feed force in the direct drilling axis while ensuring an ideal position in the guiding h&. Brushless FEIN Power Drive motor, fully encapsulated & dust-protected with 30% higher efficiency & long service life. Current/ Voltages 18 V Idling speed in reverse running 0-760rpm Load speed when cutting 0-440rpm Load speed in reverse running 0-670 rpm Torque at max. output power 26 Nm Stall torque 41 Nm Thread in steel up to M10 Thread in stainless steel up to M10 Collar & Oslash;43 mm Cone at drill shaft B12 ...

Cordless universal magnetic core drill for up to 3.5cm. Small & powerful single-speed cordless universal magnetic core drill with forward/reverse running, MT2 tool mounting, permanent magnet & maximum functionality for mobile working on the construction site. Extremely low-wear tool design with swivel-mounted motor cable protection hose for tough use in industry & manual trades. Small & light tool for continuously good work progress thanks to brushless FEIN Power Drive motor with tacho electronics & FEIN High Power storage battery with cells with high current capability. Flexibility for all mobile drilling work, such as core drilling, twist drilling, tapping, countersinking & reaming. FEIN High Power Li-ion battery. Continually high power output with 75% higher current rating than a Li-ion battery for good work progress. Simple operating concept avoids mix-ups & can be clearly seen by the user. ...

Quick charger for all FEIN 18V Li-ion batteries. ...

2-speed cordless hammer drill/driver with brushless motor & Quick IN interface. Perfectly suited to drilling up to 50mm in wood, 13 mm in metal, 13mm in stone & masonry. Brushless FEIN Power Drive motor with 30% higher efficiency & long service life. Quick IN accessory interface for all Quick IN accessories. Quick change between applications. Multi Volt interface. Cordless tool can be operated with all FEIN Li-ion batteries (12-18 V). 2-speed solid metal gearbox with switchable striking mechanism for drilling in metal, stone & masonry. Including Quick IN solid metal drill chuck (120 Nm) with carbide-tipped clamping jaws & high clamping forces. Battery voltage 18V Motor brushless Gearbox 2-speed Interface Quick IN Speed, no load 450 / 2000rpm Impacts 7 360 / 32 000rpm Max. torque (hard/soft)60 / 32 Nm Torque levels 22 + 1 Drill chuck clamping width 1.5
- 13mm Fastening 8 x 300 mm Capacity in steel & Oslash;13mm Capacity in wood & Oslash;50mm Capacity in stone & Oslash;13mm Tapping M10 Weight without battery 1.30kg
...