The De Walt DCK250D2 Combikit contains the following: Brushless Compact Hammer Drill, Brushless Impact Driver, Tough System Kit Box. De Walt DCD795 Brushless Compact Hammer Drill Brushless Motor Technology for excellent efficiency Ultra compact, lightweight design allows use in confined spaces Two speed all metal transmission for increased runtime & longer tool life Specifications Battery chemistry: XR Li-ion Voltage: 18V Battery capacity: 2.0ah Max torque (hard): 60 Nm Max torque (soft): 23 Nm Power output: 360W No load speed: 0-600/2000rpm Chuck capacity: 1.5-13mm Max drilling capacity (wood): 38mm Max drilling capacity (metal): 13mm Max drilling capacity (masonry): 13mm Weight: 1.62kg

Dimensions (L x W x H) – 197 x 67 x 218mm De Walt DCF886 Brushless Impact Driver Brushless Motor Technology for excellent efficiency 6.35mm drop in keyless hex driver allows for quick, one handed fitment Aluminium front housing provides greater heat dispersion to increase motor life Specifications Battery chemistry: XR Li-ion Voltage: 18V Battery capacity: 2.0ah Max torque: 165 Nm Power output: 280W No load speed: 0-2800rpm Impacts per Minute: 0-3200ipm Max. Bolt Diameter: M12 Weight: 1.36kg

Dimensions (L x H) – 140 x 228mm



...

The De Walt DCK250P2 is a powerful brushless twin pack that is composed of the DCD795 brushless compact hammer drill, DCF886 brushless impact driver, 2 x 5.0 Ah slide pack batteries, multi-voltage charger & DS150 Tough System Kit Box. The De Walt DCD795 18V XR Li-Ion Hammer Drill/ Driver has brushless motor technology for a long tool life & excellent work efficiency. Its compact & lightweight design means you can use this drill/driver in the most confined of spaces without compromising your speed of work. There is a two speed all metal gearing system that provides an increased runtime & an extra long tool life. There are three functions on this unit
- drill, driver & hammer for maximum versatility in the workspace. There is a 15 position adjustable torque control unit for consistent screw driving & drilling in whichever material the job calls for, & the intelligent trigger design allows for total control over the job at h&. There is a foot LED with a delay feature to maximise visibility as well as acting as a flashlight. The enhanced grip design features rubber over mould for a comfortable grip day-in, day-out & the Li-Ion battery packs allow for easy insertion & removal. This tool features a steel belt hook & a magnetic bit holder to ensure the most important tools can be kept close at h&. This tool is part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster. Max Torque (Hard)
- 60 Nm Max Torque (Soft)
- 23 Nm Power Output
- 360 Watt No Load Speed
- 0-600/2000rpm Beats per Minute
- 0-10200/34000bpm Chuck Capacity
- 1.5-13mm Max. Drilling Capacity [ Wood]
- 38mm Max. Drilling Capacity [ Metal]
- 13mm Max. Drilling Capacity [ Masonry]
- 13mm Weight/ L x W x H
- 1.62kg/197mm x 218mm x 67mm The De Walt DCF886 is the latest generation of brushless impact driver to feature the new XR Li-Ion technology. Its brushless motor means an enhanced runtime & increased durability, so you can keep working for longer. The lithium-ion batteries have a state of charge indicator so you know exactly when to re-charge your packs, making planning jobs much easier. There is a 3 LED halo light ring that provides excellent illumination of the work piece in confined or dark spaces. The DCF886 features a 6.35mm drop in keyless hex driver that means you can change tool bits with just one h&, making work more efficient & quicker. There is an aluminium front housing that provides superior heat dispersion & increases the tools motor life. The ergonomically designed handle has a rubber overmold that reduces vibration in the tool & in turn, reduces user fatigue. Max Torque
- 165 Nm Power Output
- 280 Watt No Load Speed
- 0
- 2800rpm Impacts per Minute
- 0
- 3200ipm Max. Bolt Diameter
- M12 Bit Holder
- 1/4" (6.35mm) Weight/ Length x Height
- 1.36kg/140mm x 228mm



















...

The De Walt DCK255M2 Combikit contains the following: XRP Hammer Drill, Brushless Impact Driver, 2X4.0 Ah batteries Tough System Kit Box. De Walt DCD995 Brushless Compact Hammer Drill Brushless Motor Technology for excellent efficiency Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving Tough 3 speed all metal transmission for increased runtime & longer tool life Specifications Battery chemistry: XR Li-ion Voltage: 18V Battery capacity: 4.0ah Max torque (hard): 80 Nm Max torque (soft): 42 Nm Power output: 660W No load speed: 0-450/1300/2000rpm Beats per Minute: 0-7650/22100/34000bpm Chuck capacity: 1.5-13mm Max drilling capacity (wood): 50mm Max drilling capacity (metal): 13mm Max drilling capacity (masonry): 16mm Weight: 2.13kg

Dimensions (L x W x H) – 213 x 67 x 205mm De Walt DCF886 Brushless Impact Driver Brushless Motor Technology for excellent efficiency 6.35mm drop in keyless hex driver allows for quick, one handed fitment Aluminium front housing provides greater heat dispersion to increase motor life Specifications Battery chemistry: XR Li-ion Voltage: 18V Battery capacity: 4.0ah Max torque: 165 Nm Power output: 280W No load speed: 0-2800rpm Impacts per Minute: 0-3200ipm Max. Bolt Diameter: M12 Weight: 1.36kg

Dimensions (L x H) – 140 x 228mm



...

This comprehensive kit from De Walt comes complete with two durable, high performance & finest top quality power tools, a selection of kit & even a carry bag, making it perfect for any keen DIYer or professional & excellent value. Benefiting from De Walts 18V XR battery technology, the supplied hammer drill & impact wrench will perform at a higher level for longer periods & this impressive performance figures of both tools will allow you to finish the job quickly, efficiently & with minimum fuss. See below for extended product specifications.DCD785 18V XR 2 Speed Combi Drill
- Ultra compact design
- Two Speed
- 14 position adjustable torque
- Intelligent trigger
- 13mm Single sleeve keyless chuck
- Built in LED light DCF880 18V XR Impact Wrench
- Ultra compact design
- Ergonomic & easy to use
- All metal gearing
- Intelligent trigger
- 1/2" Square socket retention
- Built in LED light 4.0 Ah 18V XR Li-Ion Battery
- Extended runtime & optimised power output
- LED Charge indicator
- Lightweight
- No Memory effect DT7915-QZ Screwdriving Set - Torsion with " Extra Grip" ribs, Incl Pz 1, 2, 3 Ph 1, 2, 3 Slotted 4.5, 5.5, 6.5, 8 Magnetic bit holder
- Hardened Core DT7508-QZ 1/2" Square to 1/4" Hex Impact Wrench
- Hardened core
- Toughened construction DE9883 Bag
- Heavy duty
- Water Resistant
- Twin carry handles
- Supported base with runner base
- Dims: 35cm x 54cm x 33cm Register Online at De Walt.co.uk for an extended 3 Year Warranty on these 18V XR Li-Ion products.























...

DCD796 Combi Drill• Brushless technology for increased power & excellent efficiency• 460 UWO • 3 position LED • Drill length reduced to 174mm• Max Torque (Hard): 70 Nm • Max Torque (Soft): 27 Nm • Power Output: 460 Watt • No Load Speed: 0-550/2000 rpm • Beats per Minute: 0-9350/34000 bpm • Chuck Capacity: 1.5-13 mm • Max. Drilling Capacity [ Wood]: 40 mm DCF887 Impact Driver• Torque 205nm • Precision drive on speed 1 gives more control on smaller screws• 400W power output• 0-1000, 0-2800, 0-3250rpm • O-3800ipm • 1/4” bit holder• 3x Halo LED light ring ...

The DCK285M2 from De Walt comes complete with two powerful & durable De Walt power tools, the DCD785 XRP 2-Speed compact hammer drill & the DCF885 impact driver, suitable for a wide range of drilling & driving applications. Both are powered by De Walts long-life XR Li-Ion batteries, designed for efficiency & better performance. As an added bonus, this kit is supplied with a DS150 large capacity Tough-System kitbox, 2 4.0 Ah Li-Ion batteries that last up to 33% longer than 3.0 Ah batteries & a charger, meaning this set is ready to go straight out of the box. DCD785 Features Full metal gearbox & chuck
- 2 speeds
- 14 position adjustable torque
- 13mm single sleeve keyless chuck
- Intelligent trigger
- Built in LED light
- Ergonomic design DCF885 Features All metal gearing
- Aluminium front housing
- 6.35 keyless drop-in hex driver
- Intelligent trigger
- Built in LED light
- Ergonomic design DS150 Tough-System Kit Box Features Locking side handles
- Side clips for stacking
- Metal hinges & latches
- Bi-Material comfort handle
- Pressure release valve














...

The De Walt DCK290M2 18V XR Li-Ion 2 Kit contains: DCD985 XRP Hammer Drill, DCF885 Impact Driver, 2 x 4.0 Ah Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box. DCD985 XRP Hammer Drill Tough 3 speed all metal transmission for increased runtime & longer tool life 22 position adjustable torque control for optimised precision when screw driving 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes Efficient intelligent trigger allowing total control over all applications LED with delay feature for enhanced visibility & flashlight functionality Improved grip design providing greater application control & maximum comfort Li-Ion battery packs allows for superior insertion & removal with state of charge indicator Steel belt hook & magnetic bit holder ensure strong storage solutions Multi voltage charger for use with 18V, 14.4V & 10.8V XR Li-Ion battery packs Part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster DCF885 Impact Driver Latest generation compact impact driver featuring new XR Lithium Ion technology Part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster Ultra compact, light weight design allows for use in confined spaces Improved ergonomic design & rubber grip increase comfort All metal gearing for efficient power transmission & long tool life Aluminium front housing provides greater heat dispersion increasing motor life Intelligent trigger allowing total control over all applications 6.35mm drop in keyless hex driver allows for quick, one handed fitment Bright white LED with delay feature for enhanced visibility & flashlight functionality Steel belt clip & strong magnetic bit holder ensure storage solutions ...

The DCK382M2 cordless triple-pack from Dewalt features the DCD795 Combi Drill, the DCF886 Impact Driver, & the DCG412 Angle Grinder. The set also

Includes:: two 4.0 Ah Li-ion batteries, a multi-voltage charger, & a ‘ Tough System’ kitbox. Dewalt DCD795 Brushless Combi Drill Brushless Motor Technology for excellent efficiency Ultra compact, lightweight design allows use in confined spaces Two speed all metal transmission for increased runtime & longer tool life Specifications Battery chemistry: XR Li-ion Voltage: 18V Battery capacity: 4.0ah Max torque (hard): 60nm Max torque (soft): 23nm Power output: 360W No load speed: 0-600/2000rpm Chuck capacity: 1.5-13mm Max drilling capacity (wood): 38mm Max drilling capacity (metal): 13mm Max drilling capacity (masonry): 13mm Weight: 1.88kg

Dimensions (L x W x H) – 197 x 67 x 218mm Dewalt DCF886 Brushless Impact Driver Brushless motor provides enhanced runtime & durability 3 LED Halo ring provides maximum illumination of work piece 6.35mm drop in keyless hex driver allows for quick, one handed fitment Specifications Voltage: 18V Impacts per minute: 0 to 3200ipm No load speed: 0 to 2800rpm Maximum bolt diameter: M12 Maximum torque: 165 Nm Bit holder: 1/4"

Dimensions (L x H)
- 140mm x 245mm Weight: 1kg Dewalt DCG412 Angle Grinder Latest generation premium grinder featuring new XR Lithium Ion technology Powerful & Highly Efficient PM58 DEWALT fan cooled motor with replaceable brushes, delivers up to 7000 rotations per minute for fast cutting & grinding applications Steel cut spiral bevel gears provide highest level of durability & low vibration Specifications Voltage: 18V Disc diameter: 125mm No load speed: 7000rpm Spindle thread: M14

Dimensions (L x H)
- 400mm x 125mm Weight: 2.2kg









...

The DCK591L3 from De Walt comes complete with five powerful & durable cordless De Walt power tools, the DCD785 XRP 2-Speed combi drill, DCF885 impact driver, DCS391 Circular saw, DCS380 Reciprocating Saw & the DCL040 Cordless torch, suitable for a wide range of applications, this set

Includes:: tools for almost every job. All are powered by De Walts long-life XR Li-Ion batteries, designed for efficiency & better performance. As an added bonus, this kit is supplied with 2 large capacity Tough-System kit boxes, 3 3.0 Ah Li-Ion batteries & a charger, meaning this set is ready to go straight out of the box.DCD785 Combi Drill Features Full metal gearbox & chuck
- 2 speeds
- 14 position adjustable torque
- Hammer action
- Intelligent trigger
- Built in LED light
- Ergonomic design DCF885 Impact Driver Features All metal gearing
- Aluminium front housing
- 6.35 keyless drop-in hex driver
- Intelligent trigger
- Built in LED light
- Ergonomic design DCS391 Circular Saw Features Fan cooled motor
- Keyless bevel & cut adjustment
- Spindle Lock
- Lock off switch & Electronic motor brake
- 165mm Carbide Blade
- Ergonomic design DCS380 Reciprocating Saw Features Fan cooled motor
- 4 Position Keyless blade clamp
- Lock off switch & Electronic motor brake
- Adjustable shoe
- Ergonomic Design DCL040 Cordless Torch Features Compact & lightweight
- 110 Lumen LED Bulb
- Pivoting Head
- Integrated hook
- Ergonomic design Kit box Features Locking side handles
- Side clips for stacking
- Metal hinges & latches
- Bi-Material comfort handle
- Pressure release valve





























...

This comprehensive kit from De Walt comes complete with five durable, high performance & finest top quality power tools, batteries, charger & two heavy duty storage boxes, making it perfect for any keen DIYer or professional & excellent value. Benefiting from De Walts 18V XR battery technology, the supplied power tools will perform at a higher level for longer periods & the impressive performance figures of each of the tools will allow you to finish the job quickly, efficiently & with minimum fuss. See below for extended product specifications.DCD785 18V XR Compact Hammer Drill

Features: 13mm Keyless Chuck, 0-600/0-2000rpm No Load Speed, 0-10, 200/0-34, 000 Beats Per Minute, 35 Nm Max Torque, 38mm Drill Capacity in Wood, 13mm Drill Capacity in Metal, 13mm Drill Capacity in Masonry, Two Speed All Metal Gearing, 14 Position Adjustable Torque, Intelligent Trigger, Built In LED Worklight & Steel Belt Clip.DCF885 18V XR Impact Driver

Features: 1/4" Keyless Bit Holder, 2800rpm No Load Speed, 3200 Impacts Per Minute, 155 Nm Maximum Torque, M12 Max Bolt Diameter, All Metal Gearing, Intelligent Trigger, Built in LED Worklight & Steel Belt Clip. DCS391 18V XR Circular Saw

Features: 165mm Blade Diameter, 3700rpm No Load Speed, 50 Degree Bevel Capacity, 55mm Max Depth of Cut @ 90 Degrees, 42.1mm Max Depth of Cut @ 45 Degrees, Fan Cooled Motor with Replaceable Brushes, Intelligent Trigger Control, Keyless Adjustment, Spindle lock, Lock Off Switch & Electronic Brake.DCS380 18V XR Reciprocating Saw

Features: 28.6mm Stroke Length, 0-2950 Strokes Per Minute, Fan Cooled Motor with Replaceable Brushes, Intelligent Trigger Control, Keyless Blade Changes & Ergonomic Design DCL040 18V XR Pivot Torch

Features: Bright LED Bulb, 110 Lumen Output, Pivoting Head, Integrated Hanging Hook & Belt Clip Hook.









...