This comprehensive 36 piece tool set is suitable for a wide range of applications that require that precise, delicate touch. Complete with a screwdriver, extension & a range of bits, the set is perfect for various screwdriver applications & also

Includes:: a pair of tweezers & magnifying glass allowing users to work in tighter, harder to access areas where conventional, more cumbersome tools are not suitable.

...

These Multi angle drill bits from Clarke not only cut twice as fast as ordinary bits but can also drill curved holes & mill grooves, rebates & channels. They are perfect for drilling into joists at acute angles, making a potentially tricky job a simple one. A great addition to any keen woodworkers tool kit. ...

This 43 piece dowelling accessory kit provides replacements for doweling consumables including common dowel & drill sizes. The CHT745 kit is ideal to be used with the Clarke CDJ-2 doweling jig. ...

Designed for use on wishbone suspension using access points in the rear suspension arm, this Telescopic spring compressor from Clarke features two pairs of shaped yokes that prevent the coil from bowing, which doesnt only save time over traditional spring demounting methods, it also protects expensive suspension parts from damage too. Suitable for use with a wide range of vehicles from manufacturers such as Fiat, Hyundai, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Rover, Saab, Toyota, Volvo & Volkswagen. ...

A 1000kg capacity professional grade coil spring compression set from Clarke, suitable for use with a wide range of springs fitted to various vehicles. Supplied with three pairs of different sized, interchangeable yokes to suit springs of varying sizes & a yoke extension bracket that also allows use on conical springs. Easy to use, this compressor set makes a potentially tricky job much easier & a whole lot safer too, thanks to the included safety yokes that are designed to stop the spring bowing under compression & plastic yoke protectors that prevent damage to the spring. A comprehensive kit, the CHT747 is ideal for Mac Pherson Strut Coil Springs. ...

This engine setting/locking tool set is an essential service tool for a wide range of models from various manufacturers. Suitable for use with multiple engines fitted to a variety of models, this handy set ensures that the engine timing is locked or set correctly before, during & after engine repair by locking & holding the camshaft, crankshaft, flywheel & HP pump in the timed position. This is vital for ensuring your engine runs properly. If an engines timing is in correct, damage to valves, pistons, heads & much more can occur, which can have terminal effects. Compatible Engine Codes: 1.4D HDi: DV4C (8HR), DV4TD (8HT), DV4TD (8HW), DV4TD (8HX), DV4TD (8HZ), DV4TED (8HS), DV4TED4 (8HV), DV4TED4 (8HX), DV4TED4 (8HY)
- 1.4D DDi S: 8HY (DV4)
- 1.4D D04D: 2WZ-TV
- 1.4D TDCi: F6JA, F6JB, F6JC, F6JD
- 1.6D HDi: DV6ATED4 (9HX), DV6AUTED4 (9HX), DV6BTED4 (9HT), DV6BTED4 (9HW), DV6BUTED4 (9HT), DV6C (9HL), DV6C (9HR), DV6D (9HP), DV6DTED (9HJ), DV6DTED (9HP), DV6ETED (9HN), DV6TED4 (9HV), DV6TED4 (9HW), DV6TED4 (9HX), DV6TED4 (9HY), DV6TED4 (9HZ), DV6TED4B (9HS), DV6TED4B (9HV), DV6TED4BU (9HS), DV6UTED4 (9HX)
- 1.6D TDCi/ECOnetic: G8DD, GPDA, HHDA, HHDB, HHJA, HHJB, HHJC, HHJD, HHJE, HHJF, TZJA
- 1.6D: Y6, MZ-CD
- 1.6D DDi S: 9HX
- 1.6D/DRIVe: D4162T, D4164T







...

An essential engine service tool, this crankshaft locking pin is compatible with various Ford models & some Mazda & Volvo models. The pin simply screws into the side of the engine to locate the crankshaft in the timed position. The pin then locks the crankshaft in this position, ensuring your engine timing stays set correctly as you work on it. Having the correct engine timing is vital as it ensures your engine starts & runs correctly, making this pin a must have service tool. Compatible Models: Ford: Fiesta 1.25 (97-02), Fiesta 1.4 (97-02), Fiesta 1.6 (97-02), Fiesta 1.25 (02-09), Fiesta 1.4 (02-09), Fiesta 1.6 (02-09), Focus 1.4 (98-05), Focus 1.6 (98-05), Focus 1.6 (03-09), Focus C-Max 1.6 (03-09) & Focus 1.6 Ti-VCT (03-09) & Volvo: C30 1.6 (04-09), S40 1.6 (04-09), V50 1.6 (04-09) ...

This diesel engine setting/locking tool set is an essential service tool for a wide range of vehicles from various manufacturers. Suitable for use with multiple engines fitted to a variety of Ford, Citroen, Fiat, Jaguar, Land Rover, LDV & Peugeot models, this handy set ensures that the engine timing is locked or set correctly before, during & after engine repair. This is vital for ensuring your engine runs properly. If an engines timing is incorrect, damage to valves, pistons, heads & much more can occur, which can have serious results. This set truly is a must have for professional mechanics & DIYers alike. Compatible models: Ford: Mondeo 2.0 T Ddi/TDCi (00-07), Transit 2.0 T Di/TDCi (00-03) & 2.4 T Di (00-08), Citroen: Relay/ Jumper III (06-12, Fiat: Ducato (06-11), Jaguar: X-type (03-10, Land Rover: Defender TD4 (06-11), LDV: Convoy (02-06) & Peugeot Boxer III (06-12). ...

Part of the Clarke heavy duty tie down range, the CHT753 features heavy duty webbing & hardware, orange material for high visibility & polyester coated ‘S’ hooks. In addition the webbing is manufactured from heat treated nylon &, as such, is both waterproof & weather proof so its suitable for safely securing large loads in all weathers. ...

The CHT754 features heavy duty webbing & heat treated hardware with an easy release & retract mechanism. Polyester coated ‘S’ hooks. The ratchet handle & release are plastic coated for comfortable operation. The webbing is manufactured from polyester & is suitable for use in all weathers. ...