This adjustable Wall band is used to provide lateral support for a vertical flue, giving between 50mm -100mm clearance from a non-combustable wall. ...

A finest top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) & the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 & HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE
- We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove & stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.
...

A finest top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) & the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 & HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. IMPORTANT: Your stove must have a minimum of a 1 metre vitreous flue pipe between the stove & the stainless steel twin wall system. ...

This load bearing Ventilated Support Plate is supplied complete with a support collar & is designed for use where the flue system penetrates a combustable floor. a load bearing support plate must be fitted to every 6 metre run of flue pipe. ...

The collar attached to this plate houses & supports strips of material which expand when the activation temperature is exceeded. Once the material has expanded to the flue outer casing, the assembly maintains the fire resistance of the structure through which the flue passes. The Ventilated Fire Stop with Fire Sealing Collar is designed to meet the requirements of The Building Regulations 2000 Approved Document B & has been tested to comply with the requirements of BS EN 1856-1. ...

Replacement sanding belts for the Clarke CS6-9BD & other similar machines. ...

Replacement sanding belts for the Clarke CS6-9BD & other similar machines. ...

This finest top quality alternator (50 Hz) is ideal for OEM as well as a wide variety of industrial & agricultural applications. Designed to operate at 3000RPM, this unit

Includes:: a keyway shaft for pulley drive.

...

Prevents large objects entering the outlet side of the fan ...

5" Single / Twin Wall Adaptor
- Connects 5" single wall flue pipe to a 5" twin wall flexible chimney liner. Use
...