The De Walt DCJ069M Heated Jacket is especially designed to provide hours of warmth to the core of your body utilising De Walt XR batteries (not included). The jacket itself is created from a durable outer shell that is resistant to water, rain & wind. 3 core zones are heated during wearing, these include: the upper left chest, right chest & mid back, evenly spreading the heat to the most important parts of your body. There are 3 temperature settings to chose from
- low, medium or high. There is also a convenient pre-heat function so you can be warm as soon as the jacket is put on. The XR battery adapter features a battery charge indicator so you know when you are about to run dry. Also present are 2 handy USB (Universal Serial Bus) power ports for charging portable electronic devices, so you can achieve more on the go. The battery storage pouch expands to fit the De Walt 4.0 Ah & 5.0 Ah battery packs. This jacket runs on 10.8/14.4/18V batteries. * Bare Unit only. Use with your existing batteries & charger.
...

The De Walt DCK255P2 is an XRP twinpack that consists of the DCD995 Brushless XRP Hammer Drill, the DCF886 Brushless Impact Driver, 2 x 5.0 Ah Slide Pack Batteries, a multi-voltage charger & a DS150 Tough System Kit Box. The De Walt DCD995 is the latest 18V XR Li-Ion hammer drill/driver to feature XR 5.0 Ah battery technology. It has a tough & rugged 3 speed all metal transmission system that provides the user with a longer runtime & tool life. There is an electronic clutch that has 11 adjustable torque settings for precision screw driving & an intelligent trigger system that allows total user control over drilling/driving. The 13mm ratcheting keyless chuck has an automatic spindle lock for quicker & easier bit changes & there is a foot LED with a delay feature for enhanced work piece visibility, this also acts as a flashlight/torch. The enhanced grip design provides the user with greater control over the tool as well as maximum comfort on the job. The lithium ion battery packs allow for easy insertion & removal from the tool & each comes with a state of charge indicator so you can plan your charges accordingly. A steel belt hook is included in the package as well as a magnetic bit holder so you can keep the most important tools for the job close at hand at all times. This tool is part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster. Weight/ L x W x H
- 2.13 kg/213mm x 67mm x 205mm Max Torque (Hard)
- 80 Nm Max Torque (Soft)
- 42 Nm Power Output
- 650 Watt No Load Speed
- 0-450/1300/2000rpm Beats per Minute
- 0-7650/22100/34000bpm Chuck Capacity
- 1.5-13mm The De Walt DCF886 is the latest generation of brushless impact driver to feature the new XR 5.0 Ah Li-Ion technology. Its brushless motor means an enhanced runtime & increased durability, so you can keep working for longer. There is a 3 LED halo light ring that provides excellent illumination of the work piece in confined or dark spaces. The DCF886D2 features a 6.35mm drop in keyless hex driver that means you can change tool bits with just one h&, making work more efficient & quicker. There is an aluminium front housing that provides superior heat dispersion & increases the tools motor life. The ergonomically designed handle has a rubber overmold that reduces vibration in the tool & in turn, reduces user fatigue. Max Torque
- 165 Nm Power Output
- 280 Watt No Load Speed
- 0
- 2800rpm Impacts per Minute
- 0
- 3200ipm Max. Bolt Diameter
- M12 Bit Holder
- 1/4" (6.35mm) Weight/ Length x Height
- 1.36kg/140mm x 228mm















...

The DCK290L2 from De Walt comes complete with two powerful & durable De Walt power tools, the DCD985 XRP 3-Speed combi drill & the DCF885 impact driver, suitable for a wide range of drilling & driving applications. Both are powered by De Walts long-life XR Li-Ion batteries, designed for efficiency & better performance. As an added bonus, this kit is supplied with a DS150 large capacity Tough-System kitbox, 2 3.0 Ah Li-Ion batteries & a charger, meaning this set is ready to go straight out of the box.DCD985 Features Full metal gearbox & chuck
- 3 speeds - 22 position adjustable torque
- Hammer action
- Intelligent trigger
- Built in LED light
- Ergonomic design DCF885 Features All metal gearing
- Aluminium front housing
- 6.35 keyless drop-in hex driver
- Intelligent trigger
- Built in LED light
- Ergonomic design DS150 Tough-System Kit Box Features Locking side handles
- Side clips for stacking
- Metal hinges & latches
- Bi-Material comfort handle
- Pressure release valve













...

The De Walt DCK381M2 18V XR Li-Ion 3 is a comprehensive kit that comes complete with a DCD785 Compact Hammer Drill, DCG412 Grinder, DCF895 Brushless Impact Driver, 2 x 4.0 Ah Slide Pack Batteries, Multi-voltage charger & DS300 Tough System Kit Box. DCD785 Compact Hammer Drill 18V XR Li-Ion compact hammer drill driver. Ultra compact, lightweight design allows use in confined spaces. Two speed all metal transmission for increased runtime & longer tool life.14 position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes. Intelligent trigger design allows for total control of application. Compact 13mm single sleeve keyless chuck with automatic spindle lock for quick & easy bit change with one h&. Bright white LED with delay feature for enhanced visibility & flashlight functionality. Improved ergonomic design & rubber grip improves user comfort. Steel belt hook & magnetic bit holder ensures strong storage solutions. Part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster. Battery chemistry
- XR Li-Ion. Voltage
- 18 V. Battery Capacity
- N/A Ah. Max Torque (Hard)
- 60 Nm. Max Torque (Soft)
- 23 Nm. Power Output
- 350 Watt. No Load Speed
- 0-600/2000rpm. Beats per Minute
- 0-10200/34000bpm. Chuck Capacity
- 1.5-13mm. Max. Drilling Capacity (Wood)
- 38mm. Max. Drilling Capacity (Metal)
- 13mm. Max. Drilling Capacity (Masonry)
- 13mm. Weight
- 1.24kg. Length
- 202mm. Height
- 190mm. Width
- 80mm. DCG412 Grinder Latest generation premium Grinder featuring new XR Lithium Ion Technology. Part of the intelligent XR Lithium Ion Series designed for efficiency & making applications faster. Powerful & highly efficient PM58 DEWALT fan cooled motor with replaceable brushes, delivers up to 7000 rotations per minute for fast cutting & grinding applications. Steel cut spiral bevel gears provide highest level of durability & low vibration, increasing user productivity. Low profile jam pot gear case improves gear durability & ergonomics. Intelligent trigger & lock-off switch for enhanced work safety & control. Keyless guard for enhanced application versatility. Two position side handle offers greater comfort & control. Quick change wheel release allows quick & easy wheel removal. Improved ergonomic design & rubber grip increase comfort. Multi-voltage Charger for use with 18V, 14.4V & 10.8V XR Li-Ion slide pack batteries. Battery chemistry
- XR Li-Ion. Voltage
- 18V. Battery Capacity
- N/A Ah. Max. Disc Diameter
- 125mm. Power Output
- 405 Watt. No Load Speed
- 7000rpm. Spindle Thread
- M14. Weight
- 2.2kg. Length
- 400mm. Height
- 125mm. DCF895 Brushless Impact Driver 18V XR Li-Ion Brushless Impact Driver provides up to 57% more runtime.3 Speeds for Maximum Control in all applications. Compact, durable design delivers 170 Nm Max torque. Embedded Hex Design enables operation in confined spaces.3 LED ‘ Halo‘ ring provides maximum illumination of work piece. Ergonomic handle & rubber overmould reduces vibration & user fatigue. Battery chemistry
- XR Li-Ion. Voltage
- 18V. Battery Capacity
- N/A Ah. Max Torque
- 170 Nm. Power Output
- 290 Watt. No Load Speed
- 0-950/0-1900/0-2850 rpm. Impacts per Minute
- 0-1300/0-2400/0-3300 ipm. Max. Bolt Diameter
- M12. Bit Holder
- 1/4" (6.35mm). Weight
- 1.0kg. Length
- 132mm. Height
- 205mm.





































...

Compact, powerful & portable, the DCR016 from De Walt is a must have addition to any work site. Capable of being powered by a mains source, or a choice of any of De Walts XR Lithium Ion battery packs, the DCR016 receives both AM & FM radio signal, meaning there will always be something to blast through the twin woofers & tweeters that entertains you. If all else fails, there is even the option to play your own sounds through the unit by plugging your portable music devices into the side mounted Auxiliary point. ...

The De Walt DCS355M2 18V Cordless Multi-cutter has brushless motor technology that is capable of delivering up to 57% longer runtime over units with brushed motors. De Walts ‘QUICK-CHANGE accessory system means you can change blades & attachments quickly, easily & without the use of tools. The user has fantastic control over the unit & its speed thanks to the DUAL-GRIP variable speed trigger, this means you can work quickly & material specifically. There is a bright LED light that illuminates dark work areas to allow for more accurate cutting & there is a depth control straight cut guide that increases the users ability for accurate & detailed work. Featured is a dust extraction port optimised for use with De Walt dust extraction systems as well as a universal accessory adaptor for use with most oscillating tool accessories, regardless of br&. This tool comes complete with 2 x 4 Ah XR Li-Ion batteries, kitbox, a 35 piece accessory set to support a range of cutting or sanding applications & 1 x Multi-Voltage XR Charger. ...

Powered by De Walts high performance, long lasting 18V XR 4.0 Ah Lithium Ion battery technology, the DCS373M2 Circular Saw, with its 140mm Tungsten Carbide blade is easily capable of slicing through a wide range of material including metals & wood quickly & accurately. Operating at an impressive 3700rpm maximum speed, the DCS373M2 is a high power, finest top quality tool, ergonomically designed & extremely versatile thanks to its built in LED worklight & cordless use anywhere construction. Complete with two batteries, charger, blade & hex key, this circular saw is excellent value. ...

Ideal for a variety of cutting applications on the worksite, this 18V cordless reciprocating saw features a powerful 560W motor that allows the blade to cut a a maximum stroke rate of 2950spm, meaning it is easily capable of cutting through, wood, plastics & metals. Featuring an intelligent variable speed, lock off switch & motor brake for control & safety & keyless blade adjustment for ease of use. Complete with 2 batteries, charger & carry case. ...

This powerful circular saw from De Walt features a 460W motor, capable of rotating the 165mm carbide blade at a maximum speed of 3700rpm &, as it is cordless, it can do this almost anywhere, making it ideal for various cutting applications. It can produce 90 degrees bevel cuts to a depth of 55mm & 45 degrees cuts to a depth of 42.1mm. Featuring keyless bevel angle & depth of cut adjustment & spindle lock for ease of use & lock off switch & electronic motor break providing maximum control & safety. Complete with 165mm blade, 2 long life 3.0 Ah Li-Ion batteries, charger, rip fence, hex key & kit box. ...

The De Walt DCT410N inspection camera with wireless screen is a fantastic piece of kit that means that you can carry out full inspections in even the smallest, hardest to reach areas. Ideal for plumbers, electricians, mechanics & maintenance workers, this kit features a 17mm camera & 0.9m camera cable, allowing you to inspect areas for damage, find clear spots, find obstructions & track down lost items, anywhere, anytime. Footage can even be saved to an SD card (Not Included), for future reference. Also featuring a detachable wireless screen, this inspection camera can be used comfortably in even the tightest areas. * Bare Unit only. Use with your existing batteries & charger. ...