A 1/2" Drive, 27mm Socket from Laser, manufactured specifically for use on injectors fitted to BMW, Fiat & Ford diesel engines. This is an essential service tool, made for the easy removal & re-fitting of injectors. ...

Professional screwdriver with a satin finish cushioned ergonomic grip, magnetic black tip. Manufactured from Chrome Vanadium ...

This tensioning tool has been specifically designed to handle clockwise & anticlockwise application. ...

Seven Whitworth sockets for the classic car enthusiast. Complete with socket rail for storage 1/8", 3/16", 1/4", 5/16", 3/8", 7/16"/1/2" ...

For the removal of small bearings for various applications including alternators, generators, domestic appliances, power tools & pumps. Self centering. Capacity 1 tonne, spread 19mm
- 45mm, Reach 73mm.
...

For use on Alfa Romeo Twin Spark 1.4/1.6 2.0 engines with engine codes 323.01, 672.04, 162.01, 323.10. ...

Camshaft setting/locking plates are used to accurately align a datum slot, located in the end of the camshaft, with the top face of the camshaft housing to hold the camshaft at the (TDC) Top Dead Centre position. Locking pins are designed to pass through datum holes in the timing belt pulleys into fixed position timing holes on the engine. The Crankshaft TDC Location Pin is designed to screw into the cylinder block & provide a stop for the crankshaft to be positioned against to set the TDC position. Crankshaft Locking Tools are used to set the crankshaft timing position during both removal & replacement of the timing belt. Flywheel Locking Tool is required on engines where the flywheel & crankshaft must be held at the correct timing position. This tool is used in conjunction with the appropriate TDC Setting Screw. ...

This tool is required on engines where the flywheel & crankshaft must be held at the correct timing position. After attaching the Flywheel Locking plate, the toothed profile is adjusted & locked after being fully engaged in the flywheel ring gear. Covers most engines in the Ford range (pre 2007) including both petrol & diesel & the Zetec engine. This tool is required on engines where the flywheel & crankshaft must be held at the correct timing position. After attaching the flywheel locking plate, the toothed profile is adjusted & locked after being fully engaged in the flywheel ring gear. ...

This special Alldrive Socket Set has a unique V type profile which fits HEX/MM/AF/STAR & SPLINE fixings. ...

This extractor is designed to vacuum fluids from inaccessible or confined areas. It is ideal for oil changes on boats, cars, motorcycles, outdoor power equipment, industrial machinery etc. Also handy to remove bilge water from boats, trapped water in plumbing systems etc. ...