The 191J85-8 MKP 2.5 Ah Power Source Kit contains 2 x BL4025 40V 2.5 Ah batteries & DC40RA 240V charger supplied in a Makpac case. The BL4025 is a 40V Max Li-ion XGT 2.5 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger allows to read more detailed information on the battery usage history. The BL4025 communicates digitally between the battery & the tool, the battery & the charger & is equipped with 4 LED battery fuel gauge with a check button, cooling system for maximum battery life & has been designed to use with products in continuous operation. The BL4025 charges in Approx. 28 minutes with DC40RA & DC40RB & 38 minutes with DC40RC. The 240V DC40RA 40V Max Fast Charger is designed for charging 40V Max Li-ion XGT batteries, equipped with raised & enlarged charging indicator status light for a more visible indication, selectable melody sound for notification of fully charged battery & has two cooling fans, one for the battery & one for the charging circuit. The DC40RA is capable of performing consecutive fast charges of batteries & is compatible with the Makita Interchangeable Adapter ADP10 (available separately) for charging Makita Li-ion LXT slide type batteries. DC40RA is wall mountable. The charging time for a BL4020 40V 2.0 Ah battery is Approx. 22 minutes, BL4025 40V 2.5 Ah battery is Approx. 28 minutes & a BL4040 40V 4.0 Ah battery is Approx. 45 minutes. ...

The MKP 4.0 Ah Power Source Kit is specially designed for use with 40V Max & 18V LXT products being used in continuous operation. The BL4040 is a 40V Max Li-ion XGT 4.0 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger, allows to read more detailed information on the battery usage history. The BL4040 communicates digitally between the battery & the tool & battery & the charger & is equipped with 4 LED battery fuel gauge with a check button & cooling system for maximum battery life. The DC40RA 40V Max Fast Charger is designed for charging Li-ion XGT batteries, equipped with raised & enlarged charging indicator status light for a more visible indication, selectable melody sound for notification of fully charged battery & has two cooling fans, one for the battery & one for the charging circuit. The DC40RA is capable of performing consecutive fast charges of batteries & is compatible with the Makita Interchangeable Adapter ADP10 for charging Makita Li-ion LXT slide type batteries. DC40RA is wall mountable. The ADP10 Interchangeable Adapter Set has been designed especially for use with the Makita DC40RA 40 Max XGT Fast Charger to charge Makita LXT slide type batteries. The charging performance of the DC40RA Fast Charger with the ADP10 Interchangeable Adapter Set is equal to that of the Makita DC18RC & DC18RD chargers. The light on the DC40RA indicates the charging status. Charging times are Approx. 15 minutes for 1.3 Ah & 1.5 Ah, 24 minutes for 2.0 Ah, 22 minutes for 3.0 Ah, 29 minutes for 4.0 Ah & 40 minutes for 5.0 Ah & 6.0 Ah. ...

The 1910A2-5 Power Source Kit consists of 2 x BL4080F 40V Max XGT Li-ion 8.0 Ah batteries & a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 8.0 Ah Power Source Kit is specially designed for use with 40V Max & 18V LXT products being used in continuous operation. The BL4080F is a 40V Max Li-ion XGT 8.0 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger, allows to read more detailed information on the battery usage history. The BL4080F communicates digitally between the battery & the tool & battery & the charger & is equipped with 4 LED battery fuel gauge with a check button & cooling system for maximum battery life. The BL4080F is ideal for tools with a high power consumption & charges in Approx. 76 minutes with a rapid charger. The DC40RB is a 240V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (sold separately) to charge 14.4V & 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience & features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery & the other for the charging circuit & electronic current limiter for overload protection. The DC40RB is capable of fully charging a BL4050F 40V Max 5.0 Ah battery in Approx. 50 minutes, BL4040 40V Max 4.0 Ah battery in Approx. 45 minutes & BL4025 40V Max 2.5 Ah battery in approximate 28 minutes. ...

The 1910B1-4 Power Source Kit consists of 4 x BL4080F 40V Max XGT Li-ion 8 Ah batteries & a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 8.0 Ah Power Source Kit is specially designed for use with 40V Max & 18V LXT products being used in continuous operation. The BL4080F is a 40V Max Li-ion XGT 8.0 Ah Battery, a new type of cell with increased water & drop impact resistance. Communication between the battery & charger, allows to read more detailed information on the battery usage history. The BL4080F communicates digitally between the battery & the tool & battery & the charger & is equipped with 4 LED battery fuel gauge with a check button & cooling system for maximum battery life. The BL4080F is ideal for tools with a high power consumption & charges in Approx. 76 minutes with a rapid charger. The DC40RB is a 240V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (sold separately) to charge 14.4V & 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience & features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery & the other for the charging circuit & electronic current limiter for overload protection. The DC40RB is capable of fully charging a BL4050F 40V Max 5.0 Ah battery in Approx. 50 minutes, BL4040 40V Max 4.0 Ah battery in Approx. 45 minutes & BL4025 40V Max 2.5 Ah battery in approximate 28 minutes. ...

18V X2 (36V) LXT BL ADT Cordless Earth Auger. Perfect at doing what it was designed to do, whilst making sure you are as safe as possible using it. Take control with this auger's variable speed trigger, mechanical 2-speed control, soft start, forward/reverse rotation & attachment bar to make drilling even easier. Including a brushless motor, to increase power & battery efficiency, an auger-bit adapter (compatable with popular engine auger bits), auto power-off function to avoid accidental start-up, Twin LED job light & Auto Torque Drive Technology that adjusts the cutting speed according to the load conditions, continually optimising performance. Portable & petrol-free: make the move to cordless today. Click to see the whole Makita XGT range. ...

40VMAX Earth Auger BL XGT (Body Only) Perfect at doing what it was designed to do, whilst making sure you are as safe as possible using it. Take control with this auger's variable speed trigger, mechanical 2-speed control, soft start, forward/reverse rotation & attachment bar to make drilling even easier. Including a brushless motor, to increase power & battery efficiency, an auger-bit adapter (compatable with popular engine auger bits), auto power-off function to avoid accidental start-up, Twin LED job light & Auto Torque Drive Technology that adjusts the cutting speed according to the load conditions, continually optimising performance. Portable & petrol-free: make the move to cordless today. Bare Unit
- Use with your existing Makita XGT batteries & charger. Click to see the whole Makita XGT range.
...

A Makita two piece kit containing the HP001GZ 40 V Max Combi Drill & the TD001GZ 40 V Max Impact Wrench. This kit also comes with 2 x 191B36-3 2.5 Ah 40 V Max Li-ion batteries, a 191E08-6 Fast Charger & a 191C10-7 AP10 XGT to LXT Charger Adaptor. Claim your FREE Makita product, eligible on this purchase, with their XGT Spring-Summer 2022 promotion! www.makitauk.com/ Redeem XGTspringsummer 2022 (T& Cs apply, see website for more details) HP001GZ: This cordless combi drill is powered by a 40 V Max Li-ion battery & offers excellent performance in continuous heavy duty applications. It features a brushless motor, electric brake, 2 mechanical gears & electronic clutch. There is also a handy LED job light. The unit offers forward/reverse rotation as well as variable speed control by trigger. Other features of the HP001GZ include a digital display for visual confirmation of selected torque, a single sleeve keyless chuck to allow for easy bit installation/removal by one h&, & Active Feedback Sensing Technology (AFT) which shuts down the tool if the rotation speed suddenly slows down. TD001GZ: This cordless impact driver is powered by a 40 V Max Li-ion battery. It has electronic 4-stage impact power selection & 6 x assist modes. The 6 x assist modes are 2 x T-modes, 1 x Wood mode & 3 x Bolt modes. The TD001GZ offers constant speed control & variable speed control by trigger. It also features a brushless motor & an electric brake. A handy LED job light is also included. There is quick mode switching function, with memory function, & forward/reverse rotation. A one touch sliding chuck, for easy bit installation & removal, also helps with ease of use. An ergonomically designed, high comfort grip provides the user with comfort when operating. 191B36-3: This 40V 2.5 Ah Li-ion XGT battery has a cooling system for maximum battery life as well as greatly increased water & drop impact resistance. It also features a 4 LED battery fuel gauge with a check button. It also provides digital communication between the battery & the tool & battery & the charger. There is also digital communication between the battery & the charger. 191E08-6: It takes this charger Approx. 28 minutrs to fully charge a 2.5 Ah battery & 45 minutes to fully charge a 4.0 Ah battery. The new, raised & enlarged charging indicator status light provides clearer indication whilst there is also a selectable melody sound for full charge notification. For safety, the unit features two cooling fans, one for the battery & one for the charging circuit. 191C10-7: An XGT to LXT Charger Adaptor for use with model DC40RA to charge LXT Li-Ion batteries. The charging performance is as high as that of DC18RC. Not compatible with the following batteries, adapters & checkers: BL1430A, Ni-MH batteries, ADP01, ADP02, ADP03, ADP04, BTC01, BTC02, BTC03 Click to see the whole Makita XGT range. ...

The DK0176G205 is a 40V Max XGT combo kit, comprising TD003GZ Impact Driver, HP001GZ Combi Drill, 2 x 2.5 Ah batteries & a charger. The TD003GZ is a cordless Impact Driver, powered by 40V Max XGT battery, to supply energy to the powerful 40V brushless motor, with variable speed controlled by trigger & constant speed control to automatically apply additional power to the motor to maintain constant speed control to allow the user to operate the Impact Driver at the same speed when operated on a fully charged battery, to deliver up to 4, 100 ipm, 3, 700 rpm & 210 Nm maximum tightening torque, designed for optimum performance in continuous, heavy duty applications. The TD003GZ is equipped with 14;” hex shank, 4 mode selection for max, hard, medium & soft for bolts, tool-less bit change, trigger lock, reverse switch, anti-restart function & overload protection. The TD003GZ has an LED job light on each side with pre-glow & after-glow function. TD003GZ features T-Mode for thin metal only, anti-bit wobbling structure & light mode. Machine screw M4 to M8 & standard bolt M5 to M16, High strength bolt M5 to M14 & coarse thread screw 22 to 125mm. The HP001GZ is a cordless, compact Combi Drill, designed for excellent performance in continuous heavy duty applications, powered by 40V Li-ion XGT battery, to supply energy to the powerful 40V brushless motor, with variable speed controlled by trigger, 2 mechanical gears & electronic clutch, to deliver up to 2, 600 rpm, 39, 000 bpm & 140 Nm maximum fastening torque for a wide range of drilling, fastening & hammer drilling applications. The HP001GZ is equipped with 21 torque settings in high speed & 41 torque settings in low speed with digital display for visual confirmation of the selected torque setting, single sleeve keyless chuck for quick & easy bit installations & removals & depth gauge for increased drilling consistency. The HP001GZ features Active Feedback Sensing Technology (AFT) to shut down the drill to protect the user if the rotation speed suddenly slows down. Maximum capacity in steel 20mm, wood 76mm masonry 20mm. ...

This Makita Brad Nailer will help you fly through your fixing & panelling jobs. A nail gun that can drive up to 5000 nails on a single charge (2.5 Ah battery), it also

Includes:: depth adjustment, a trigger lock & low-recoil mechanism. Along with its LED job light & magazine window, you know you are given control & precision with this product. A brad nailer that is designed to last, whilst also keeping you safe. Utilising an Anti Dry-fire Mechanism, easy-to-see slim nose tip, ergonomic, high-comfort grip & brushless motor. You can be sure that keeping both yourslef & the machine in perfect working condition is the top priority. Click to see the whole Makita XGT range.

...

The Makita 40VMAX XGT BL Cordless 18 Ga 40 mm (1-5/8") Brad Nailer (Body Only) will help you fly through your fixing & panelling jobs. A nail gun that can drive up to 5000 nails on a single charge (2.5 Ah battery), it also

Includes:: depth adjustment, a trigger lock & low-recoil mechanism. Along with its LED job light & magazine window, you know you are given control & precision with this product.A brad nailer that is designed to last, whilst also keeping you safe. Utilising an Anti Dry-fire Mechanism, easy-to-see slim nose tip, ergonomic, high-comfort grip & brushless motor. You can be sure that keeping both yourslef & the machine in perfect working condition is the top priority. Bare Unit
- Use with your existing Makita XGT batteries & charger. Click to see the whole Makita XGT range.


...