These tyre levers have been constructed from hot forged from EN8 steel hardened, tempered & zinc plated. ...

Vast selection of commonly used tools for the workshop & around the home contained inside a steel cantilever toolbox. Featuring a 45-tooth reversible ratchet, 16oz claw hammer, combination pliers, side cutters, a range of screwdrivers, a tape measure & a wide selection of screwdriver bits, sockets & hex keys. Lining the toolbox are high density foam inserts to help organise storage & clearly spot when tools are missing. Cantilever toolbox manufactured from sheet steel with five trays & measuring 420 x 200 x 200mm. Contents: 1 x 3/8" Ratchet wrench 1 x 75mm 3/8" Square drive extension bar 2 x Spark plug sockets 16mm & 21mm 1 x 3/8 (F) x 1/4" (M) Adaptor 10 x 3/8" Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17 & 19mm 8 x 3/8" Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, & 3/4" 10 x 1/4" Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm 10 x 1/4" Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, & 1/2" 3 x 1/4" E Sockets: E6, E7 & E8 1 x 1/4" Screwdriver bit driver 1 x 1/4" Hex bit holder (60mm) 19 x 1/4" Hex 25mm CRV screwdriver bits: PH0, PH1, PH2, PH3, PZ1, PZ2, PZ3, H3, H4, H5, H6, SL4, T8, T10, T15, T20, T25, T27 & T30 1 x 1/4" Hex x 1/4" Square drive adaptor 8 x Metric hex keys: 1.5, 2, 2.5, 3, 4, 5, 5.5 & 6mm 8 x Imperial hex keys: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, & 1/4" 1 x 16oz BS876 Claw hammer 1 x 5m Tape measure 1 x 150mm Combination pliers 1 x 150mm Side cutters 2 x Plain slot screwdrivers
- 5x 75mm & 6x 100mm 2 x Cross slot screwdrivers
- PH1 x 75mm & PH2x 100mm 6 x Combination spanners: 8, 10, 12, 13, 14 & 17mm 1 x 18mm Utility knife 1 x Scissors 25 x 150mm Cable ties 1 x Cantilever tool box

...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 40W of electricity to keep the burner operating & it consumes as little as 0.9 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 66m-square
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery.
...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 50W of electricity to keep the burner operating & it consumes as little as 1.2 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 85m 2
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery. Highly efficient to run consuming just 50W of electricity & 1.2 litres of diesel fuel per hour Low noise & it heats evenly in all directions Comes with a remote control for ease of operation Thermostatically controlled with easy to use control panel & digital display Supplied with flue kit for a more permanent installation & it must be used in indoor areas that are not well-ventilated
...

This indirect far infrared diesel heater with flue kit features a remote control & digital thermostat for easy heat control. It is economical, low noise, odourless & highly cost efficient to run. This heater consumes only 50W of electricity to keep the burner operating & it consumes as little as 1.7 litres of diesel fuel per hour. Unlike traditional fan heaters, infrared heat spreads evenly in all directions. It can be used indoors & semi-enclosed areas, with the installation of the supplied flue kit. Designed for heating spaces of Approx. 110m 2
- ideal for heating outbuildings, garages, greenhouses & workshops. It is fitted with wheels for manoeuvrability. The remote control is supplied with Lithium CR2025 battery.
...

These Draper shears have a straight edged blade & are ideal for trimming & training shrubs, bushes & small trees. The unique hand grip position gives accurate cutting especially when shaping trees & bushes. ...

H&-held dual reading gauge with flexible 250mm long hose. Swivel angled tyre connection & air release valve. Large easy-to-read scale graduated 5-100psi in increments of two psi & 0.5-6bar in increments of 0.1 bar. ...

Features: Interchangeable base & finger plates, Hook & loop base pads, Dust collection box & extraction facility. Supplied
...

For use on 14-23mm diameter track rods This track rod end tool is for loosening & adjusting stubborn track rods. The solid forged steel head & jaws allow more torque for less effort while the large surface area of the serrated jaws help prevent damage to the track rod. ...

The Draper TRRT-4PC Tool Kit is designed for easy removal & installation of ball joints on track rods. Knurled handle provides extra grip & three interchangeable heads offer complete versatility. Supplied with robust impact resistant plastic carrying box. ...