Drapers BMSM Bench Mounted Spindle Moulder benefits from a powerful 1500W with variable speed settings. Dust extraction port with 100mm adaptor Supplied with: rear fence; back plates; chuck guard; non-return guides; 4m (approx.) cable & approved plug. This Draper Bench Mounted Spindle Moulder feature left & right extension wings for increased space & an adjustable spindle height. Supplied with 6.0, 6.35, 8.0, 12.0 & 12.7mm bushes. ...

This Draper portable, gas bottle mounted heater is ideal for heating areas up to 80m-square. Durable Grade A ceramic plates are fixed to a steel tubular bottle clamp, to securely mount onto the rim of the propane cylinder. It is simple to use & the direction of heat can be altered by adjusting the angle of the st&. There are two power settings (low & high) allowing adjustable heat control of between 10, 250-15, 354 BTU (3-4.5k W) There is also a gas safety valve installed, so if the heater does not light
- the gas immediately shuts off. It is supplied with a 90-degree hose connector, regulator & 70cm hose. Designed for use with propane cylinders of 7-15kg gas capacity.
...

The Draper BPF/HAND/SAE Brake Pipe Flaring Tool is an easy to use hand held tool for quick accurate automotive pipe flaring. ideal to be used with pipes attached to the vehicle. ...

This bearing, seal & bush insertion & extraction kit, has been perfectly designed to aid with accurate & controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc. ...

This brake pad key has been constructed from chrome vanadium, hardened & tempered with a chemically blacked finish. ...

The Draper outdoor tap is ideal to be used for both hot & cold water & benefits from a brass manufacture for added durability. ...

The Draper 84714 is a bandsaw designed for workshop use & it benefits from excellent performance & cutting capacity. This model is fitted with a LED flexible work light, upper & lower door micro switches, dust collection tray, quick release blade tensioner & upper & lower blade bearing guides for added ease of use. This two wheel bandsaw can also be attached to a stand (available separately) or bench mounted for added convenience, & has the ability to be tilted between 0-45°, enabling straight cross cutting, ripping, mitre & bevel cutting. The 84714 comes supplied with a mitre gauge, rip fence & dust extraction outlet. ...

The Draper 84715 is a bandsaw designed for workshop use & it benefits from excellent performance & cutting capacity. This model is fitted with a LED flexible work light, upper & lower door micro switches, dust collection tray, quick release blade tensioner & upper & lower blade bearing guides for added ease of use. This two wheel bandsaw can also be bench mounted for added convinience, & has the ability to be tilted between 0-45°, enabling straight cross cutting, ripping, mitre & bevel cutting. The 84715 comes supplied with a 1/2 inch 4TPI blade, a push stick, open ended 8 x 10mm spanner, 3, 4, 5 & 6mm hex keys & is fitted with a dust extraction outlet & cable with approved plug. ...

Features: Part of the Draper power tool series, Variable speed, Quick change belt system, Dust collection bag & extraction
...

These shears feature non-stick coated, hardened & finely ground blades which continually provide a sharp, smooth, corrosion-free operation. The 1000mm long tubular steel handles with soft grip provide both comfort & strength. ...