More From Contributor

The Clarke CJS400 400W Variable Speed Jigsaw is a budget tool ideal for home & DIY use. With an easy-to-use 6-speed variable speed dial for cutting speeds from 0-3000 strokes per minute it is very simple to adjust your cutting speed for the type of material you are using for your job. This jigsaw is capable of bevel at ranges of 0°, 15°, 30° or 45°, both left & right. This jigsaw also benefits from a convenient vacuum part allowing you to connect a vacuum hose (diameter 39.5mm) to keep a clean work area. This jigsaw is supplied & with a 100mm wood cutting blade & 3mm hex key. Our full range of Clarke jigsaws are provided with a 12-Month Manufacturer's Warranty. ...

Available

This wheel kit converts your KC6 generator into a portable unit making it ideal for moving around site, factory, warehouse & office units etc. ...

Available

This wheel kit converts your KC10 generator into a portable unit making it ideal for moving around site, factory, warehouse & office units etc. ...

Available

The ideal lathe for model engineering. This ultra compact precision lathe has variable speed, forward/reverse & power feed as standard. An optional milling / drilling head (available here) may also be fitted, adding to its functionality. Download Product Manual ...

Available

This superb, precision mini lathe is designed to perform a wide variety of tasks. It is solidly manufactured, with a cast ...

Available

The CL6FS work light is ideal to be used where the level of light is low in factories, workshops, warehouses etc. Protected by a durable casing, it has a steel stand that can be tilted between 55
- 120 degrees making it easy to direct light to the area it is required. Lightweight & highly portable it

Includes:: a comfort grip carry handle.

...

Available

6W, 96 LED Security Light with PIR Motion Sensor This powerful security light is ideal outside your home or premises. With 96 LEDs it produces 500 lumens of bright light & has a long operating life of 50, 000 hours. It has a PIR motion sensor that activates the light when movement is detected up to a distance of 10 meters & a 180° angle. Supplied with an adjustable bracket, the light can be directed in various positions. Using LED bulbs it uses up to 80% less energy than a halogen equivalent & is significantly cheaper to run.

Includes:: controls to vary sensitivity levels, length of activation & darkness activation.

...

Available

The Clarke CROS1 125mm Random Orbital Sander is a multi purpose fine sander/polisher for the home, useful on a variety of dry surfaces including car bodywork. This Orbital Sander produces a virtually scratch-free finish
- surfaces are then ready for subsequent repainting or treating. Download Random Orbital Sander Product Manual
...

Available

Lightweight, super slim & compact. These practical, pocket size folding binoculars, protected by rubber body armour, produce crystal clear images & are ideal for walkers, nature lovers & others who enjoy the big outdoors. Download Product Manual ...

Available

A contemporary steel log basket that will complement an open fire place or Clarke wood burning stove. ...

Available

Clarke Clarke CL500M Metal Lathe With Mill Drill

This superbly engineered Lathe can be used for turning, milling and drilling.Its solid construction with a cast iron bed and a multitude of features make it outstanding value for money.Lathe specification includes- Forward/reverse operation - 3 jaw chuck - MT3 & MT4 centres - spanners and wrench - gear sets for screw cutting - compound slide with 4 way tool post - machine vice. Distance between centres 430mm. Swing over bed 305mm. Swing across slide 172mm diameter. Spindle bore 26mm dia. Spindle taper No.4MT. Tail stock taper No.3MT. 6 spindle speeds 170-1630rpm. 14 metric screw cutting pitches 0.5 to 5.3mm. 20 imperial screw cutting pitches 11 to 40 tpi. Power feed for screw cutting - Powerful 3/4hp 230V motor - No volt release switch. Chuck guards on lathe and mill/drill.Mill/Drill
Specifications- Quick action clutch for independent lathe/mill drill operation - fine feed adjustment on milling - mill head rotates 360 degrees - capstan to raise/lower head - mill/drill head includes 13mm drill chuck - drill capacity: 13mm - spindle column: 175mm. Spindle nose-table: 150-320mm. Spindle bed: 212-382mm. Spindle stroke: 92mm. Spindle taper: 3MT (with drawbar). Spindle speeds: 12 (130-1660 rpm). Table: 200x 150mm. T slots: 12mm.

Availability: In Stock
Supplier: Machine Mart
SKU: 060712520

Description Reviews / Comments Add New

Product Description

This superbly engineered Lathe can be used for turning, milling & drilling. Its solid construction with a cast iron bed & a multitude of features make it outstanding value for your money. Lathe

Specification

Includes::- Forward/reverse operation
- 3 jaw chuck
- MT3 & MT4 centres
- spanners & wrench
- gear sets for screw cutting
- compound slide with 4 way tool post
- machine vice. Distance between centres 430mm. Swing over bed 305mm. Swing across slide 172mm diameter. Spindle bore 26mm dia. Spindle taper No.4MT. Tail stock taper No.3MT. 6 spindle speeds 170-1630rpm. 14 metric screw cutting pitches 0.5 to 5.3mm. 20 imperial screw cutting pitches 11 to 40 tpi. Power feed for screw cutting - Powerful 3/4hp 230V motor
- No volt release switch. Chuck guards on lathe & mill/drill. Mill/ Drill Specifications- Quick action clutch for independent lathe/mill drill operation
- fine feed adjustment on milling
- mill head rotates 360 degrees
- capstan to raise/lower head
- mill/drill head

Includes:: 13mm drill chuck
- drill capacity: 13mm
- spindle column: 175mm. Spindle nose-table: 150-320mm. Spindle bed: 212-382mm. Spindle stroke: 92mm. Spindle taper: 3MT (with drawbar). Spindle speeds: 12 (130-1660 rpm). Table: 200x 150mm. T slots: 12mm.

Reviews/Comments

Add New

Intelligent Comparison

Available

Clarke Clarke CL250M Metal Lathe Machine Mart

£477.60

Available

Clarke Clarke CL430 Metal Lathe Machine Mart

£958.80

Jargon Buster

Motor - A evice that converts electricity into motion

Diameter - A measurement across a circle passing through the middle

iron - An electrical deviced used for removing creases from fabrics

iron - A chemical element (FE). The most common element on earth

RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.

cutting - The seperation of an object usually using a cutting tool such as a knife

Quick - Something that is fast

Specification - A description of a product with the details of its attributes.

Mill - A building which can grind grain into flour.

Rotates - Something that can move around and axis or in a circle.

Engineered - Something that is developed and created by specialists (engineers).

Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.

Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Head - The upper part of a body typically separated by the neck.

Supplier Information

Machine Mart

Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!

More From Contributor

Clarke Clarke CL500M Metal Lathe With Mill Drill

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account