LED Flexi Strips

Product Description

These LED Flexi Strips allow you to create stunning lighting effects & are available in a selection of 4 LED colours & RGB Colour Changing options. They can also be dimmed & controlled remotely. There are a variety of ways that these can be used, dependant on the effect you want to achieve, please call us should you require any help. Linking Static Colours Each 5M strip contains 300 LEDs, with a max of 24W, & can be cut every 3 LEDs. The strips are then connected together (to a max of 5M) using the link leads. Each 5M strip comes supplied with 2 link leads. Additional link leads, in packs of 10, can be purchased separately.  Each 5M strip requires its own driver. Dimming Static Colours In order for these to be dimmed you will need to install the RGB controller, sold separately, between the driver & first strip. Each strip will also need to be connected through an in-line amplifier. Linking RGB Colour Changing Each 5M strip contains 150 LEDs, with a max of 36W, & can be cut every 3 LEDs. These are then connected together (to a max of 5M) using the link leads. Each 5M strip comes supplied with 2 link leads. Additional link leads, in packs of 10, can be purchased separately. You will also need the RGB controller, which

Includes:: a remote control, between the driver & first strip. When linking strips of 5M together, you must use the in-line amplifier in order for all strips to work. Each amplifier is then linked to the original driver so additional drivers are not needed for each 5M. However, please ensure the wattage of your driver is high enough for your chosen display. Additional drivers can be added where necessary. Maximum Wattages Each 5M of Static colour flexi-strips use a max of 24W
- 4.8W per metre Each 5M of Colour Changing flexi-strips use a max of 36W
- 7.2W per metre Please note: Static & Colour Changing cannot be linked together. RGB Controller & Remote Control These are required for the colour changing option, or if dimming is required on the static options. Each controller is supplied with its own remote control. The remote control is, however, synchronised with every controller so one remote control can be used to control displays that are, perhaps, on 2 different sides of a room. Any extra controls can be kept as spares. Drivers These are available in 3 wattages, including a sealed 30W IP67 rated driver for outdoor installations. If you are considering installing a large or complicated display, please contact our sales team to discuss your requirements.