More From Contributor

Utilising the power of KASP's tried & tested padlocks along with their sleeved security chains, these padlock & chain kits take the headache out of figuring out which padlocks will work with which chains, & vice-versa. There are three types available for various applications, including bicycles, mopeds, motorbikes, machinery, gates, a.. ...

Available

Available in 60mm & 70mm diameter versions, these padlocks are built with stainless steel bodies & are double-bolted for added security. The benefits of these disc-type padlocks have been well known for years now, primarily in terms of being very difficult to effectively attack due to the lack of solid edging. The very nature of the.. ...

Available

The old english style of padlock is one of the most well recognised designs, & comes with its own unique benefits. One of the desirable factors of these padlocks is the sliding keyhole cover, protecting the internal 4-lever mechanism from dust & dirt. This makes these a popular choice for dusty & unclean environments, .. ...

Archived Product

These traditional flat-steel hasp & staple sets come with a hardened staple & full chrome plating, & are supplied with fixings for wooden gates, cabinets, shed doors etc. They offer a basic level of security where you just quite simply want to have a convenient means of padlocking a shed door or similar, but where security requirements are.. ...

Available

Designed for use in extreme weather conditions, these robust & hard-wearing padlocks boast a laminated steel body, encased in a tough impact-absorbing weatherproof vinyl jacket, complete with a full keyway cover cap which seals tight to protect the keyway. The shackle is made from 9mm thick hardened steel, coated with a tough black vi.. ...

Available

These full length keeps are unique to the Kenrick Excalibur range of multipoint locks, aligning with all of the locking points in all the right places, for a nice & easy job. The overall length of the keep is 1558mm. We recommend to check against the existing keep. If replacing an existing Excalibur keep, you s.. ...

Available

These models can be indentified with the marking " Excalibur" which can be found on the strip of the multipoint lock. A holdback facility can also be found here, this allows temporary free access through the door until the snib is pushed back into the off position. The PZ measurement for the Kenrick Excalibur is 92mm & 62mm; this allows different.. ...

Available

This u PVC & Modern Timber window lock gearbox by Kenrick, comes in two base variants. This model has 42mm fixing centres, which is an industry standard. This model also accepts a 7mm follower & comes in either a 20mm or 22mm backset. These can be identified by the 20mm being flat only the edge, whereas the 22mm version is slightly raised along t.. ...

Available

This is a replacement gearbox for an original Kenrick Sabre UPVC window lock. This particular model has a bladed bolt which throws out from the centre of the Kenrick Sabre UPVC window lock gear box. The fixing centres for this model are 42mm & its follower accepts an industry standard 7mm spindle.UPVC gearboxes are usually one of the first compo.. ...

Available

This model is indentified by the markings of Kenrick & Sentri Lock, which will be stamped on the side of the case of the gearbox itself. The Kenrick Sentry UPVC Window Lock gear box comes with industry standard 42mm centres; it also has a standard 7mm follower that accepts handle & hardware furniture. Sentry design & manufacture a wide range.. ...

Available

Kenrick Centurion UPVC Window Lock Gear Box

This model is a part of the Kenrick Centurion range of replacement UPVC window lock gearboxes that should be stamped with the Kenrick and Centurion labels on the cover plates and part of the ridged bar. These models come in either a 20mm or 22mm backset; they can be indentified again by markings, either CLS22 or CLS20 where the last two digits refe..