More From Contributor

Manufactured right here in the UK, the Imperial Clawbolt lock is designed for sliding doors where a traditional latch or bolt would not be able to stop the door from sliding open. Clawbolt locks look much like deadlocks in principle, until the lock is operated via key, which is when all the magic happens! The bolt incorporates a splayin.. ...

Available

This is the latch-only version of the traditional six-inch horizontal lock cases, still manufactured by Imperial Locks right here in the UK. The

Dimensions of the lock case itself sit at 151mm horizontally (that's roughly 6" in imperial measurements), & 88mm high (a little under 3½" in imperial). This is the most common size for horiz..

...

Available

This particular bathroom door lock comes in form of a deadlock. With a detachable faceplate it can be flipped upside down which allows for different placement of the privacy turn depending on the way you wish to install it. You may want to re-use an existing hole for handles previously on the door rather than re-drilling, in which case.. ...

Available

Similar to a mortice sashlock, this bathroom door lock is designed with a latch & a deadbolt, where the latch is operated by a set of handles but instead of a key operating the deadbolt, you have a turn & release set operating it instead, which may be a separate privacy turn set fitted under a pair of floating handles, or may be incorporated in.. ...

Available

These British Standard BS3621 mortice dead-locks have been designed & built right here in Britain by Imperial Locks based in Willenhall, Engl&. Built for security & lasting performance, these locks come with a fantastic 10 year mechanical guarantee! BS3621 locks are considered these days to be the industry.. ...

Available

A budget solution for internal doors, this light-duty tubular latch is ideal for low-traffic doors around the home where you just need a basic latch & handle setup. It is worth bearing in mind with budget latches that while they do the job perfectly well under typical light use, they do require sprung door handles or knobs to be used... ...

Available

These compact privacy deadbolts are ideal for upgrading from a mortice latch to a functional bathroom lock with a privacy turn & release set. With the body measuring just 76mm x 38mm, these will retrofit quite nicely into most existing cut-outs for flat pattern mortice latches. Available in both 5mm & 8mm followers, you can ch.. ...

Available

This deadlockable mortice nightlatch has unique 48mm, 51mm or 58mm centres, designed to retrofit old mortice lock applications, where you wish to expand the keyhole to a euro profile cut-out. With mortice nightlatches the principle is simply to be able to have the door latch shut, & not be able to gain access again without a key, while from.. ...

Available

Ideal for use in public & commercial toilet / bathroom situations, these DDA compliant privacy lock cases offer 72mm lock centres & a fully bodied DIN style lock case. DDA requirements require that the locking centres
- that's the distance between the centre of the top 8mm spindle & the centre of the bottom 5mm spindle (or keyhole..
...

Available

Designed predominantly for commercial applications where you may have every door machined to work with DIN style lock cases, these follow the same pattern as the DIN sashlocks which must have a minimum of 72mm PZ centres. Of course these are deadlocks so would not have any PZ centres as there are is no option for handles operating a latch on.. ...

Available

LocksOnline Imperial BS3621 5-Lever Sashlock

These British Standard BS3621 mortice sash-locks have been designed and built right here in Britain by Imperial Locks based in Willenhall, England. Built for security and lasting performance, these locks come with a fantastic 10 year mechanical guarantee! BS3621 locks are considered these days to be the industry standard for satisfying..