More From Contributor

If you need the specialist spindles, fixing kits, code change plugs, tweezers or any of the other Borg spares & accessories for the Borg 5000 series, we have the most popular choices here. The accessory pack
Includes::2 x 60mm machined screws 2 x 50mm machined screws 2 x 40mm machined screws 1 x hexagon wrench (to change the handing of the un..
...

Available

The BL-5001 is the latching model, which comes as a kit complete with a suitable tubular latch in either a 60mm backset or 70mm backset. Built with large buttons & DDA compliant easy-grip handles in a modern return-to-door style, these can be used in public spaces where conforming to disability regulations is important. The oute.. ...

Available

Ideal for aluminium doors & glass paned doors, the BL-5002 Borg Combination Lock comes as a kit with a very slim design 28mm backset flat pattern latch designed for narrow applications. These particular models are also fitted with DDA compliant handles, so should you be using these in a public setting where conforming to the relevant.. ...

Available

Ideal for settings where combination code entry is required during the day, but during certain time periods you wish to be able to deadlock the door for added security, & to limit access to keyholders only, the BL5003 is the full sashlock case model of the Borg 5000 series of combination door locks. It comes complete with a euro lock case, .. ...

Available

This model offers full deadlocking of the door to prevent entry without a key overnight etc, whilst always offering free escape at all times. Even if the lock is deadlocked via key & someone needed to get out in the event of a fire or emergency, using the inside handle would retract the deadbolt as well as the latch, which is critical in th.. ...

Available

This is the mortice nightlatch version of the Borg 5000 series. It is often the preferred option over a tubular latch as the latch itself will deadlock when the door is closed, preventing latch-slipping attacks. It does this by utilising a small snib next to the latch itself, which when compressed, locks the latch out in place, so that.. ...

Available

The BL5051 offers a keypad on both sides rather than just on one side, meaning you must enter a code to enter or exit the property (or room) the code lock is fitted on. This is particularly useful if you want to prevent unauthorised persons from allowing entry to guests or visitors, so in order to open the door from either side, you will need.. ...

Available

The BL5053 is a keypad both sides combination lock, which requires you to enter a code to enter or exit rather than just on entry. This back-to-back keypad setup is particularly useful if you want to prevent unauthorised persons from allowing entry to guests or visitors, so in order to open the door from either side, you will need to enter a.. ...

Available

The Borg 5101 incorporates a different type of handle setup, with a flat knob on the keypad side, & a standard lever handle on the inside. This allows for easy escape in the form of a simple lever handle to exit the building in the event of an emergency, whilst offering a smaller, low profile door knob on the keypad side. These are su.. ...

Available

The BL5103 uses the same handle setup as the 5101; with the flat knob on the keypad side, & a standard lever handle on the inside, but with this model, the kit you get

Includes:: a euro lock case rather than the standard tubular latch, offering more security & flexibility in terms of its use. The internal handle allows for easy escape in the..

...

Available

Borg 5008 Combination Lock (DDA Handle) For Use With Panic Hardware

The Borg 5008 is supplied with an adaptor to work with panic hardware such as push-to-exit bars and push-pads on emergency exits and fire escapes. In essence it works as what we would call in the industry an 'outside access device' for doors with panic hardware, such as fire exits and emergency escape doors. In most cases, these doors are onl..