More From Contributor

Are you looking for a door finger plate that matches your existing stainless steel door hardware & furniture? The ASEC 75mm Wide Stainless Steel Push Finger Plate is the perfect solution. The finger plate could prolong the life of your doors paintwork, protecting it from the marks & damage that are inevitably caused when a door is in const.. ...

Available

Front door handles with 85mm PZ centres are not particularly common, but multipoint locks with this 85mm centres measurement do exist on some u PVC doors. If unsure, this is the measurement between the centre of the keyway & the centre of the square spindle used by the handles to operate the multipoint lock. With a fully rotatable handle, the.. ...

Available

These handles have two fixing points, top & bottom, 200mm apart from each other (measured centre to centre). Coupled with a 92mm pz measurement (measured from the centre of the keyway to the centre of the square spindle for the handles), this set of measurements lends its self perfectly to the standard Roto multipoint locks. As with most u PV.. ...

Available

These offset handles for multipoint locks are designed to the most common

Specification, & therefore are widely considered

...

Available

These handles are to suit FUHR, AGB, ASGARD, KFV, MACO, ROTO, WINKHAUS, GU, LOCKMASTER & MILA Multipoint Locks. Supplied with Spindle & Fixing screws. These handles are NON-HANDED & so can be mounted in Right or Left hand operation. These handles are UNSPRUNG. Fixing lugs are supplied on both backplates.. ...

Available

Asec A1/A95 Low duty Electric Strike Release. The Asec A1/A95 voltage 12v DC/24v DC are continuously rated... ...

Available

Asec A11/A15 Deep Jaw Low duty Electric Release, on the 12V DC voltage the release is continuously rated & Deep Jaw... ...

Available

A1C/A95C Strike Release with 12v DC/24v DC are continuously rated. These are Low duty Electric Strikes. Surface fix release with packing pieces. Suitable for inward opening rebated doors. Inward opening only... ...

Available

Asec A1r/A95 Strike release, is an low duty inward opening only electric door lock. The 12v DC / 24v DC voltages are continuously rated... ...

Available

This model is a part of Asec's electric door release range, the Asec A2 Delay electric strike release. This model replaces standard strikes & allows remote access control of a door or gate. This model has been designed to be mortised into the door frame itself, much like standard mechanical strike. It also comes with a mechanical delay pin which.. ...

Available

ASEC 92mm PZ UPVC Lever Handles- 240mm (211mm Fixings)

These handles are to suit FUHR, AGB, ASGARD, KFV, MACO, ROTO, WINKHAUS, GU, LOCKMASTER & MILA Multipoint Locks.Supplied with Spindle and Fixing screws.These handles are NON-HANDED and so can be mounted in Right or Left hand operation.These handles are UNSPRUNG.Fixing lugs are supplied on both backplates..