More From Contributor

£531.51
Complete with a 3 Amp built in power supply, the ACTpro 200 is a Two Door Expander for use with the ACTpro range of Door Controllers. The power supply supports two doors, providing each with its own fuse & battery support. There are LEDS on-board providing fault indication, with faults being reported to the controller & PC. The 18swg mild steel.. ...
Available
£719.63
The ACTpro 4000 is a 2 Door Control Unit, which can be extended to support up to 16 doors when used with ACTpro Door Stations. If networked via a PC interface, the ACTpro 4000 can be combined with other ACTpro 4000 units to facilitate up to 4, 000 doors. It supports up to 60, 000 users in 1, 024 user groups. Providing support for entry & exit reader.. ...
Available
£1201.14
Housed inside a metal cabinet & complete with a monitored 3 amp power supply & cable management system, the ACTpro 4200 is a TCP/IP enabled four dour controller. It can be expanded to control 16 doors when used with ACTpro Door Stations, & can be further extended through networking via a PC interface to facilitate up to 4, 000 doors. It can su.. ...
Available
£333.45
The ACTpro e Lock Hub is designed specifically for use with the ACTpro e Lock range. One IP Hub will support up to 32 ACTpro e Locks, & can be powered either by a 12 Volt DC power supply or via Power Over Ethernet (POE). The hub operates on a wireless frequency of 868 Mhz utilising 128bit AES Encryption, & can be sited up to 150m away from the ACTpr.. ...
Available
£400.49
ACTpro Enterprise Software provides all the functionality that is required to manage your access control systems, & supports unlimited doors & PC clients. Intuitive & easy to use with a look & feel similar to a web browser experience, the software scales from a single door to thousands of doors. The software has been developed as a role base.. ...
Available
£32.49
The ACTpro MIFARE DESFire EV1 2k card comes in a pack of 10, & is suitable for printing enabling use as an ID card in addition to being an access control credential. With a read range of 5cms, it utilises 128bit AES encryption. It will work with the following ACTpro Readers:ACTpro DESFIRE EV1 1030ACTpro DESFIRE EV1 1030PMACTpro DESFIRE EV1 1040AC.. ...
Available
£29.76
The ACTProx Duo-B Card features both proximity & mag stripe technology, & the card can also be printed to enable use as an ID badge as well. It has a read range of 8 cms, & is supplied in packs of ten. It will work with:ACTpro 5e prox ACTsmart 2 1070ACTsmart 2 1070PMACTpro 1030e ACTpro 1030PMACTpro 1040e ACTpro 1050e ACTentry V-IPX.. ...
Available
£183.41
Product Overview The ACTsmart 1080e is extremely attractive in design & is built of rugged polycarbonate with stainless steel keys. This pin & proximity device is designed to allow simple addition & deletion of users. It may be totally standalone or connected to other ACTsmart devices in a master-slave mode.. ...
Archived Product
£80.03
Product Overview The ACTsmart 1090 is attractive in design & is built of rugged polycarbonate with stainless steel keys. The device is designed to allow simple addition & deletion of users. It may be totally standalone or connected to other ACTsmart devices in a master slave mode to enable changes to all doors.. ...
Archived Product
£29.2
The ACTsmart 2 Lock enables you to enhance the security of the ACTsmart 2 combined reader/controller units by placing the lock relay in a more secure location, such as within a Power Supply Unit that has tamper outputs. The reader/controller would be placed on the unsecure side of the door, whilst the ACTsmart 2 Lock would be installed on the secure s.. ...
Archived Product

ACTpro Input / Output Module

The ACTpro Input / Output Module is a device that allows an ACT controller to be used in applications where signalling to other equipment is required such as for elevator control, CCTV switching and alarm system control. Main Features:Compatible with ACTpro Controllers (ACTpro 1500e, 1520e, 4000 and 4200)Provides up to 4 IO modules per controllerTh..
  • Availability: In Stock
  • Supplier: Locks Online
  • SKU: CO-31700
Availability: In Stock
£236.34

Product Description

The ACTpro Input / Output Module is a device that allows an ACT controller to be used in applications where signalling to other equipment is required such as for elevator control, CCTV switching & alarm system control. Main
Features: Compatible with ACTpro Controllers (ACTpro 1500e, 1520e, 4000 & 4200) Provides up to 4 IO modules per controller Th..

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Alarm - A device which emits a sound at a pre-set time/event
IO - Input/Output - the commpuncation between two devices or between a device and its operator.
Equipment - A product or good that is tactile.

Supplier Information

Locks Online
Page Updated: 2022-08-01 02:00:03

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu