Easy to set up & install the compact LINDY LC Fibre Optic DVI-D Extender is the most cost effective, high quality solution on the market for sending DVI-D signals over incredible distances. Send DVI-D signals without compression or any degradation over standard LC duplex multimode (50/125m) fibre cable up to 500m (not included) or up to an incredible 1500m using a LC duplex singlemode (9/125m) fibre optic cable. Unlike other solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable to reach such great lengths, so no additional cables are required. DVI-D control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected directly to both the DVI-D source & display. The modules are then connected together using a single, standard 'off the shelf' LC Fibre cable fibre optic cable (not included). ...

* Remote control requires our Infra red kit (sold separately) The LINDY Fibre Optic DVI-D Extender is the most high performance solution on the market for sending DVI-D signals over incredible distances. Using a standard SC duplex multimode (50/125) fibre optic cable (not included) to make the long distance connection, the DVI-D Extender provides full support for computer DVI-D Single Link & HDTV DVI-D signals, RS-232 & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable
- no additional cables are required for RS-232 or IR remote control. DVI-D, RS-232 & IR remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the DVI-D source & display using standard DVI-D cables of up to 5m. The modules are then connected together using a single, standard 'off the shelf' SC 50/125mduplex multimode cable of up to 300m in length (fibre optic cable is not included) Additional Requirements Fibre Optic Patch cable: SC duplex multimode cable (50/125m) (of required length up to 300m) Two DVI-D cables for connecting to source & display: DVI-D Male to Maleor Premium Gold DVI-D (up to 5m in length) LINDY Infra red kit for using IR remote controls Package Contents 1 x Fibre Optic DVI-D Transmitter Unit 1 x Fibre Optic DVI-D Receiver Unit 2 x Multi Country Power Supplies 8 x Rubber Feet (if not installed) LINDY Manual
...

* Remote control requires our Infra red kit (sold separately) The LINDY Fibre Optic DVI-D Extender is the most high performance solution on the market for sending DVI-D signals over incredible distances. Using a standard SC duplex single mode (9/125* Remote control requires our Infrared Kit (sold separately)) fibre optic cable (not included) to make the long distance connection, the DVI-D Extender provides full support for computer DVI-D Single Link & HDTV DVI-D signals, RS-232 & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable
- no additional cables are required for RS-232 or IR remote control. DVI-D, RS-232 & IR remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the DVI-D source & display using standard DVI-D cables of up to 5m. The modules are then connected together using a single, standard SC duplex single mode fibre cable of up to 5km in length (fibre optic cable is not included) Package Contents 1 x Transmitter Unit 1 x Receiver Unit 2 x multi-country PSU, 5VDC, 2.6A Manual 8 x rubber feet (if not installed)
...

The LINDY Fibre Optic HDMI 4K UHD Extender is the most cost effective, high performance solution on the market for sending HDMI signals over incredible distances. Using a standard SC duplex multimode (50/125) fibre optic cable (not included) to make the long distance connection, the HDMI Extender provides full support for HD 1080p, HDCP, multi channel audio, CEC & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic HDMI Extender uses just one duplex fibre cable
- no additional Ethernet patch cables are required for DDC & remote control. HD1080p, multi channel audio, HDCP, CEC & remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the HDMI source & display using standard HDMI cablesof up to 3m. The modules are then connected together using a single, standard 'off the shelf' SC 50/125mduplex multimode cable of up to 300m in length (fibre optic cable is not included) Additional Requirements Fibre Optic Patch cable: SC duplex multimode cable (50/125m) (of required length up to 300m) Two HDMI cables for connecting to source & display: HDMI Male to Male or Premium Gold HDMI Male to Male (up to 3m in length) LINDY Infra red kit for using IR remote controls Package Contents 1 x Fibre Optic HDMI Transmitter Unit 1 x Fibre Optic HDMI Receiver Unit 2 x Multi Country Power Supplies 8 x Rubber Feet LINDY Manual
...

The LINDY Fibre Optic HDMI 4K UHD Extender is the most cost effective, high performance solution on the market for sending HDMI signals over incredible distances. Using a standard LC duplex single mode (9/125) fibre optic cable (not included) to make the long distance connection, the HDMI Extender provides full support for HD 1080p, HDCP, multi channel audio, CEC & infrared remote control. If your video content does not include HDCP protection it is possible to use this extender to reach distances of up to 3km. Unlike other manufacturer's solutions, the LINDY Fibre Optic HDMI Extender uses just one duplex fibre cable
- no additional Ethernet patch cables are required for DDC or remote control. HD 1080p, multi channel audio, HDCP, CEC & remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the HDMI source & display using standard HDMI cablesof up to 5m. The modules are then connected together using a single, standard LC duplex single mode fibre cable of up to 700m (3km if without HDCP) in length (fibre optic cable is not included). Package Contents 1 x Transmitter Unit 1 x Receiver Unit 2 x multi-country PSU, 5VDC, 2.6A Manual 8 x rubber feet (if not installed)
...

Bus Type: Express Card/34 Chipset: Texas Instruments Ideal for connecting Fire Wire & USB (Universal Serial Bus) peripherals, such as DV camcorders, printers, scanners, drive housings etc., to your notebook Built-in power jack for optional adapter for use when connected devices require powered Fire Wire ports For use with computers which feature Express Card expansion slots Compatible with Windows 98SE/ME/2000/XP/ Vista/ Windows 7/8/ Server 2003, 2008 & Mac OS 8.6 Can be used with a Universal Power Adapter 2 Year warranty ...

Adjustable 360adapter for use with Fire Wire cables & peripherals Swivel & rotate action means that you can connect to devices without obstructing adjacent ports Connectors: Fire Wire 6 Pin Female to Fire Wire 4 Pin Male Supports Fire Wire 400 devices The 360 Fire Wire adapter has been designed to provide greater flexibility when connecting 6 Pin Fire Wire cables & peripherals to the 4 Pin port on your Mac, Notebook, PC or hub. The Fire Wire adapter features a clever 360swivelling & rotating connector which can be rotated through almost any angle, allowing you to connect Fire Wire cables to even the most obscurely placed ports. ...

Adjustable 360adapter for use with Fire Wire cables & peripherals Swivel & rotate action means that you can connect to devices without obstructing adjacent ports Connectors: Fire Wire 6 Pin Female to Fire Wire 6 Pin Male Supports Fire Wire 400 devices The 360 Fire Wire adapter has been designed to provide greater flexibility when connecting Fire Wire cables & peripherals to your Mac, Notebook, PC or hub. The Fire Wire adapter features a clever 360swivelling & rotating connector which can be rotated through almost any angle, allowing you to connect your Fire Wire cables to even the most obscurely placed ports. ...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Fit this 6 Pin Fire Wire Keystone into a Keystone Snap-in Block & place into a face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Please Note: This keystones has to be used as a part of a pair & in conjunction with 3 Fire Wire cables, one cable inside the wall & two cables outside. Fire Wire cables use a crossed pinout configuration. This keystone uses a 1:1 straight wiring. If you only use two cables connected with 1 keystone it will not result in a crossed pinout configuration. This keystones cannot be used as a coupler for extending two Fire Wire cables! Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks & Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocksor Dual Keystone Snap-in Blockswhich come in packs of four. Then use with a Single Gang Face Plateor Double Gang Face Plate. ...

Bus Type: PCIe (2.5 Gbit/sec) Speed: Up to 800 Mbps (IEEE1394b); up to 400 Mbps (IEEE1394a) Card Connectors: 2 x External Fire Wire 800 9 Pin Female Ports; 1 x External Fire Wire 400 6 Pin Port On-board 4 Pin power connector for extra power from system power supply Compatible with Windows 2000/XP/2003 Server/ Vista/ Windows 7/8, Linux & Mac OS 10.2 2 year warranty ...