LED bulbs are designed to replace your existing halogen range. LED lighting is highly efficient as it uses 90% less energy than the traditional lighting sources
- saving you more money. We aim to make choosing which product is right for you as easy as possible; whether you're looking for a particular size, colour, wattage or lumen output. This particular bulb is non-dimmable, however, we do have dimmable reflectors available in our bulb categories. If you are choosing a dimmable LED, you may require a Trailing Edge dimmer switch. Please contact us if you’re unsure on your dimmer switch compatibility.
...

High brightness, low power. Considerably reduce your energy bills with this LUMi Life LED canopy light that’s ideal for petrol stations, car parks, forecourts & lighting up large areas. It produces 11, 800 lumens, while only consuming 100 Watts, leading to an energy saving of up to 65% when compared to traditional lighting sources. Extra protection. Boasting an IP66 rating & coming with a powdered coating, it’s totally dust tight & protected against water jets & waves. It also comes with full European safety approval & aluminium high output reflectors. Made in the UK. Made in the UK, you can be assured that quality is at the heart of this product. Plus it’s built with Osram drivers for added efficiency & reliability. Better security. Choose the model with a sensor option & you’ll benefit from automatic lighting that also goes that little bit further to save energy. As a vehicle approaches your l&, the light will switch to a higher brightness, providing motorists with greater visibility. When the sensor isn’t alerted, it’ll remain dimmed but still lit for safety & security purposes. Crisp white light. The LED produces a crisp & clear white light which complements CCTV imagery to provide a sharper picture. ...

High brightness, low power. Considerably reduce your energy bills with this LUMi Life LED canopy light that’s ideal for petrol stations, car parks, forecourts & lighting up large areas. It produces 11, 800 lumens, while only consuming 100 Watts, leading to an energy saving of up to 65% when compared to traditional lighting sources. Extra protection. Boasting an IP66 rating & coming with a powdered coating, it’s totally dust tight & protected against water jets & waves. It also comes with full European safety approval & aluminium high output reflectors. Made in the UK. Made in the UK, you can be assured that quality is at the heart of this product. Plus it’s built with Osram drivers for added efficiency & reliability. Better security. Choose the model with a sensor option & you’ll benefit from automatic lighting that also goes that little bit further to save energy. As a vehicle approaches your l&, the light will switch to a higher brightness, providing motorists with greater visibility. When the sensor isn’t alerted, it’ll remain dimmed but still lit for safety & security purposes. Crisp white light. The LED produces a crisp & clear white light which complements CCTV imagery to provide a sharper picture. ...

This 100W LED Low Bay light has been designed to directly replace 250 Watt Metal Halide/SON fittings for mounting heights of 5m. Available in a range of options to suit most environments, this LED Low Bay has a wide range of applications. Switching to this 100W LED Low Bay will give you the same lighting or better lighting levels whilst saving a minimum of 65% on ongoing energy costs with 0% maintenance costs
- payback time can be well under two years. Supplied with pre-installed cables & eye hooks to make installation quick & easy & offering an impressive 50, 000 Hour life expectancy (Note: that the LED Chips used have an 85% Lumen Maintenance at 100, 000 Hrs). We offer additional options including. IP65. 0-10v Analogue, 0-100K ohm resistance dimming, Dali Interface. (Can be fitted with a variety of control systems or connected to existing Building Management Systems (BMS). 3mm Clear Diffusers. Emergency back up. PIR/ Daylight Dimming Sensors. Secondary Optics. Technical

Details:. Light Source: 315 piece x Osram Duris E5630 JDSI LED – 5000K CRI Min 85 (85% Lumen Maintenance at 100, 000 Hrs). Heat Sink: Custom Finned Aluminium Extrusion. Light Output: 10, 000 Lumens – Certified by the UK LIA. Light Beam Angle: Greater than 120 Degrees. Driver: Lumotech Holland BV. Power Requirements: 85-260v – 0.41 Amps at 240V. Maximum Operating Temp: 50 Deg C Ambient – Thermal Protection using power output reduction in over temperature condition. Case

Size: 610mm x 310mm x 200mm. Case

Material: Powder Coated Steel. Luminaire Weight: 11 Kgs. Protection: IP20. Certification: EN 60598, EN 61347, CE Marked, Light Output Tested & Certified by the UK Lighting Industry






...

This 100W LED Low Bay light has been designed to directly replace 250 Watt Metal Halide/SON fittings for mounting heights of 5m. Available in a range of options to suit most environments, this LED Low Bay has a wide range of applications. Switching to this 100W LED Low Bay will give you the same lighting or better lighting levels whilst saving a minimum of 65% on ongoing energy costs with 0% maintenance costs
- payback time can be well under two years. Supplied with pre-installed cables & eye hooks to make installation quick & easy & offering an impressive 50, 000 Hour life expectancy (Note: that the LED Chips used have an 85% Lumen Maintenance at 100, 000 Hrs). We offer additional options including. IP65. 0-10v Analogue, 0-100K ohm resistance dimming, Dali Interface. (Can be fitted with a variety of control systems or connected to existing Building Management Systems (BMS). 3mm Clear Diffusers. Emergency back up. PIR/ Daylight Dimming Sensors. Secondary Optics. Technical

Details:. Light Source: 315 piece x Osram Duris E5630 JDSI LED – 5000K CRI Min 85 (85% Lumen Maintenance at 100, 000 Hrs). Heat Sink: Custom Finned Aluminium Extrusion. Light Output: 10, 000 Lumens – Certified by the UK LIA. Light Beam Angle: Greater than 120 Degrees. Driver: Lumotech Holland BV. Power Requirements: 85-260v – 0.41 Amps at 240V. Maximum Operating Temp: 50 Deg C Ambient – Thermal Protection using power output reduction in over temperature condition. Case

Size: 610mm x 310mm x 200mm. Case

Material: Powder Coated Steel. Luminaire Weight: 11 Kgs. Protection: IP20. Certification: EN 60598, EN 61347, CE Marked, Light Output Tested & Certified by the UK Lighting Industry






...

Consume up to 90% less power. LUMi Life Floodlights bulbs provide an outstanding life time expectation of up to 30, 000 hours. With traditional halogen/incandescent lighting, 80% of the electricity is lost through heat. LED lighting run significantly cooler as heat is dissipated by metal sinks that take heat away from the light source – this maintains the lifespan of the LED bulb. Built to last!. With an IP65 rated exterior that protects against dust & water intrusion, you can trust this flood to deliver
- whatever the weather. The wide 120° beam angle will cover a large area for added security. 5 year warranty. All LUMi Life LED products come with a standard 2-year warranty. With our LUMi Life products you can extend your warranty cover to five years by completing & returning our extended warranty form. Additional information. Floodlight

Dimensions do depend on whether sensor is opted for or not.


...

Compatible with the LUMi Li FE Link range. The LUMi Li FE Connection Leads are compatible to use with the LUMi Life 4W, 12W & 24W connectable LED lights that lets you connect multiple lights together. These models are linkable, so you can join multiple units using the butt-connector & mounting clips. 3 year LUMi Li FE warranty. On selected LUMi Li FE products, we offer an automatic 3 year warranty. This entitles you to unlimited replacements from the original purchase throughout the warranty period. If your original purchase is no longer available, a new replacement with the latest equivalent model will be offered. Product

Dimensions.

Width: 1000mm
-

Depth: 20mm






...

table {. font-family: arial;. border-collapse: collapse;.

Width: 100%;. }. td, th {. border: 1px solid FF671F;.

...

table {. font-family: arial;. border-collapse: collapse;.

Width: 100%;. }. td, th {. border: 1px solid FF671F;.

...

The LUMi Li Fe LED High Bay features a IP65 rated die-cast aluminium body for an enduring build-quality suited to industrial environments. You can replace a Metal Halide model & enjoy energy savings of up to 63%. At the top of this product, there is a potentiometer feature which can be used to reduce the output current/power by 25%. ...