All the Cobra gardening equipment has been designed in Britain with the British working conditions in mind. The Cobra MM51B is designed to mulch grass in a domestic garden setting. Mulching whilst mowing cuts the grass trimmings into very tiny pieces which are virtually impossible to see. These tiny trimmings are thrown back onto the ground where as they decompose the soil & grass roots are provided with nutrients & essential moisture. When you use a lawn mower for mulching grass always start on the highest available cutting point & work your way down. Use the 3rd cut rule & only cut a 3rd of the grass height at a time. This will ensure the best cut & finish to the mowing area & reduces the strain on the engine & cutting blade. The Cobra MM51B gives you the choice of 5 cutting height adjustments from 30mm right up to 75mm for the longest grass. The 5 stages can be adjusted using just 1 lever located on the rear right hand wheel. The MM51B is h&-propelled & is powered by a reliable & very efficient 140cc Briggs & Stratton 500E series petrol engine. The 500E Ready Start engines have a best in class performance offering lower emissions. A Briggs & Stratton Ready Start engine has an automatic choke so no priming is needed. Specifications: Model: MM51 B Type: Mulcher Drive: No, h&-propelled Engine: Briggs & Stratton Ready Start 500E Series Engine Capacity: 140cc Cutting Width: 51cm / 20" Cutter Deck Material: Steel Cutting Height Stages: 5 adjustable from 30mm
- 75mm Cutting Height Levers: One Cutting System: Rotary Blade Features: Mulch / Side Discharge Collector: N/AWarranty: 2 years domestic
...

The Cobra MT 250C multi-tool comes complete with 4 gardening attachments powered by a single power unit. Trimmer Attachment
- Pre-filled
...

The Cobra MT 250C multi-tool comes complete with 4 gardening attachments powered by a single power unit. Trimmer Attachment
- Pre-filled
...

Investing in a combination garden tool makes good sense if you have a variety of jobs to carry out around your garden. Instead of having to swap between 3 or 4 individual tools a multi- tool has a single power unit which is interchangeable with different attachments. The attachments can be removed & make for easy storing or transport between jobs. The Cobra MT270K is a quality multi tool powered by a 2-stroke Kawasaki engine. Kawasaki are an industry leader in developing engines with a balanced output & lower fuel consumption & emissions. The MT270K

Includes:: 4 attachments:1. Line trimmer, 75cm shaft & Tap 'n' Go nylon head 2. Brush cutter with metal 1.6mm thick tri-blade 3. Long reach 72cm pole pruner with 12" (30cm) bar 4. Long reach 64cm hedge trimmer with 180 degree articulating head (55cm double sided blade & 30mm tooth spacing) This Cobra combination tool package also

Includes:: an extension shaft for using with the pole pruner & hedge cutter & a single shoulder harness for added operator safety & comfort. Specifications: Model: MT270 K Type: combination tool Engine: Kawasaki TJ27E Air cooled 2-stroke Capacity: 27cc Fuel: Unleaded petrol Oil: 2 stroke Max Power: 0.77k W Starting System: Recoil Handle: Loop Hedge Cutter Blade Length: 55cm Hedge Cutter Tooth Spacing: 30mm Tooth Spacing: 30mm Pole Pruner: 12" bar & chain Single Shoulder Harness Weight: 8.3kg Warranty: Manufacturer's 2 Year Domestic



...

Investing in a combination garden tool makes good sense if you have a variety of jobs to carry out around your garden. Instead of having to swap between 3 or 4 individual tools a multi- tool has a single power unit which is interchangeable with different attachments. The attachments can be removed & make for easy storing or transport between jobs. The Cobra MT270K is a quality multi tool powered by a 2-stroke Kawasaki engine. Kawasaki are an industry leader in developing engines with a balanced output & lower fuel consumption & emissions. The MT270K

Includes:: 4 attachments:1. Line trimmer, 75cm shaft & Tap 'n' Go nylon head 2. Brush cutter with metal 1.6mm thick tri-blade 3. Long reach 72cm pole pruner with 12" (30cm) bar 4. Long reach 64cm hedge trimmer with 180 degree articulating head (55cm double sided blade & 30mm tooth spacing) This Cobra combination tool package also

Includes:: an extension shaft for using with the pole pruner & hedge cutter & a single shoulder harness for added operator safety & comfort. Specifications: Model: MT270 K Type: combination tool Engine: Kawasaki TJ27E Air cooled 2-stroke Capacity: 27cc Fuel: Unleaded petrol Oil: 2 stroke Max Power: 0.77k W Starting System: Recoil Handle: Loop Hedge Cutter Blade Length: 55cm Hedge Cutter Tooth Spacing: 30mm Tooth Spacing: 30mm Pole Pruner: 12" bar & chain Single Shoulder Harness Weight: 8.3kg Warranty: Manufacturer's 2 Year Domestic



...

The Cobra MTX230C Petrol Multi-Tool comes with four attachments offering you everything you need to tackle jobs around your garden. Powered by a new Cobra 23c S-Series engine, the MTX230C has a hedge trimmer, pole pruner, grass trimmer & brush cutter attachment. Cobra’s S-Series engine has been engineered to be reliable, high-torque, with industry-leading reduced emissions & reduced fuel consumption. Fitted with an ergonomic loop handle, the MTX230C is ideal for working in confined & awkward spaces. The shoulder harness limits the strain & offers the best position whilst working. The brush cutter has a 3 tooth ‘ Tri-blade’ which is designed to give a clean cut without clogging. The brush cutter effortlessly reduces brambles, dense shrub & saplings. For long grass & lawn edging, the grass trimmer attachment has a productive tap ‘n’ go nylon head, the dual line trimmer head releases extra line when the head is tapped on the ground. The MTX230C has a 75cm shaft & loop handle which expertly trims around trees & obstacles. The 180o articulating hedge cutter attachment will give a smooth finish at varying angles. The 62cm double-sided blade attaches to a 72cm shaft making easy work of trimming of hedge tops & sides. The MTX230C has a wide 30mm tooth spacing & will trim through thicker varieties of hedge. Pole pruner attachments are particularly handy for maintaining lower tree branches without needing a ladder. The MTX230C has a quality Oregon chainsaw bar & chain attached to a 72cm shaft, this offers a good reach to cut back branches. The saw bites well & leaves an even finish which will stimulate healthy growth. Specification: Power Unit:        Engine Type: Cobra, S-Series, 23cc 2-stroke Starting Method: Recoil Fuel Tank Capacity: 0.5 litres Handle: Loop Harness: Single shoulder Weight: 4.3kg Grass Trimmer & Brush Cutter Attachment: Shaft Length: 75cm          Trimming Head: Dual nylon line, tap 'n' go Brush Cutting Blade: Metal 3 tooth ‘ Tri-blade’ Weight: 1.8kg Hedge Trimmer Attachment: Shaft Length: 72cm Blade Length: 62cm Tooth Spacing: 30mm Articulation: 180o Oregon Bar & Chain Weight: 2.3kg Pole Pruner Attachment: Shaft Length: 72cm          Guide Bar Length: 30cm / 16" Weight: 1.9kg Extension Shaft: Optional, sold separately Warranty: 2 years domestic (subject to annual service), 1 year commercial ...

The Cobra MTX230C Petrol Multi-Tool comes with four attachments offering you everything you need to tackle jobs around your garden. Powered by a new Cobra 23c S-Series engine, the MTX230C has a hedge trimmer, pole pruner, grass trimmer & brush cutter attachment. Cobra’s S-Series engine has been engineered to be reliable, high-torque, with industry-leading reduced emissions & reduced fuel consumption. Fitted with an ergonomic loop handle, the MTX230C is ideal for working in confined & awkward spaces. The shoulder harness limits the strain & offers the best position whilst working. The brush cutter has a 3 tooth ‘ Tri-blade’ which is designed to give a clean cut without clogging. The brush cutter effortlessly reduces brambles, dense shrub & saplings. For long grass & lawn edging, the grass trimmer attachment has a productive tap ‘n’ go nylon head, the dual line trimmer head releases extra line when the head is tapped on the ground. The MTX230C has a 75cm shaft & loop handle which expertly trims around trees & obstacles. The 180o articulating hedge cutter attachment will give a smooth finish at varying angles. The 62cm double-sided blade attaches to a 72cm shaft making easy work of trimming of hedge tops & sides. The MTX230C has a wide 30mm tooth spacing & will trim through thicker varieties of hedge. Pole pruner attachments are particularly handy for maintaining lower tree branches without needing a ladder. The MTX230C has a quality Oregon chainsaw bar & chain attached to a 72cm shaft, this offers a good reach to cut back branches. The saw bites well & leaves an even finish which will stimulate healthy growth. Specification: Power Unit:        Engine Type: Cobra, S-Series, 23cc 2-stroke Starting Method: Recoil Fuel Tank Capacity: 0.5 litres Handle: Loop Harness: Single shoulder Weight: 4.3kg Grass Trimmer & Brush Cutter Attachment: Shaft Length: 75cm          Trimming Head: Dual nylon line, tap 'n' go Brush Cutting Blade: Metal 3 tooth ‘ Tri-blade’ Weight: 1.8kg Hedge Trimmer Attachment: Shaft Length: 72cm Blade Length: 62cm Tooth Spacing: 30mm Articulation: 180o Oregon Bar & Chain Weight: 2.3kg Pole Pruner Attachment: Shaft Length: 72cm          Guide Bar Length: 30cm / 16" Weight: 1.9kg Extension Shaft: Optional, sold separately Warranty: 2 years domestic (subject to annual service), 1 year commercial ...

The Cobra MTX230C Petrol Multi-Tool comes with fourattachments offering you everything you need to tackle jobs around your garden. Poweredby a new Cobra 23c S-Series engine. the MTX230C has a hedge trimmer. polepruner. grass trimmer & brush cutter attachment. Cobra’s S-Series engine has been engineered to be reliable.high-torque. with industry-leading reduced emissions & reduced fuelconsumption. Fitted with an ergonomic loop handle. the MTX230C is idealfor working in confined & awkward spaces. The shoulder harness limits thestrain & offers the best position whilst working. The brush cutter has a 3 tooth ‘ Tri-blade’ which is designedto give a clean cut without clogging. The brush cutter effortlessly reducesbrambles. dense shrub & saplings. For long grass & lawn edging. the grasstrimmer attachment has a productive tap ‘n’ go nylon head. the dual linetrimmer head releases extra line when the head is tapped on the ground. The MTX230 Chas a 75cm shaft & loop handle which expertly... ...

The Cobra MTX230C Petrol Multi-Tool comes with four attachments offering you everything you need to tackle jobs around your garden. Powered by a new Cobra 23c S-Series engine, the MTX230C has a hedge trimmer, pole pruner, grass trimmer & brush cutter attachment. Cobra’s S-Series engine has been engineered to be reliable, high-torque, with industry-leading reduced emissions & reduced fuel consumption. Fitted with an ergonomic loop handle, the MTX230C is ideal for working in confined & awkward spaces. The shoulder harness limits the strain & offers the best position whilst working. The brush cutter has a 3 tooth ‘ Tri-blade’ which is designed to give a clean cut without clogging. The brush cutter effortlessly reduces brambles, dense shrub & saplings. For long grass & lawn edging, the grass trimmer attachment has a productive tap ‘n’ go nylon head, the dual line trimmer head releases extra line when the head is tapped on the ground. The MTX230C has a 75cm shaft & loop handle which expertly trims around trees & obstacles. The 180o articulating hedge cutter attachment will give a smooth finish at varying angles. The 62cm double-sided blade attaches to a 72cm shaft making easy work of trimming of hedge tops & sides. The MTX230C has a wide 30mm tooth spacing & will trim through thicker varieties of hedge. Pole pruner attachments are particularly handy for maintaining lower tree branches without needing a ladder. The MTX230C has a quality Oregon chainsaw bar & chain attached to a 72cm shaft, this offers a good reach to cut back branches. The saw bites well & leaves an even finish which will stimulate healthy growth. Specification: Power Unit: Engine Type: Cobra, S-Series, 23cc 2-stroke Starting Method: Recoil Fuel Tank Capacity: 0.5 litres Handle: Loop Harness: Single shoulder Weight: 4.3kg Grass Trimmer & Brush Cutter Attachment: Shaft Length: 75cm Trimming Head: Dual nylon line, tap 'n' go Brush Cutting Blade: Metal 3 tooth ‘ Tri-blade’ Weight: 1.8kg Hedge Trimmer Attachment: Shaft Length: 72cm Blade Length: 62cm Tooth Spacing: 30mm Articulation: 180o Oregon Bar & Chain Weight: 2.3kg Pole Pruner Attachment: Shaft Length: 72cm Guide Bar Length: 30cm / 16" Weight: 1.9kg Extension Shaft: Optional, sold separately Warranty: 2 years domestic (subject to annual service), 1 year commercial ...

The Cobra MX3440V is an award-winning cordless mower & comes supplied with a 2.5 Ah battery & charger. The battery can be interchanged with any of the Cobra 40v cordless garden range. The 34cm push mower is compact & lightweight making it an ideal choice for small domestic gardens. Dependant on the grass conditions the fully charged 2.5 Ah battery will run the mower for 40 minutes & is recharged within 1.5 hours. There are 5 preset cutting heights ranging from 25-75mm. The 35-litre grass collector is constructed from fabric with a hard top. Battery & charger included. Specifications: Power: 40v lithium-ion battery Motor: Brushed Deck

Material: Polymer Drive: Hand push Cutting

Width: 34cm / 13" Grass Collector Type: Fabric & Hard Top Grass Bag Capacity: 35ltr Cutting Heights: 5 settings from 25
- 75mm Wheel

Size: (F) 6" / 15cm, (R) 9" / 23cm Folding Handles: Yes Weight: 16.3kg Warranty: Manufacturer 2 year






...