PGYTECH Standard Safety Carrying Case for DJI AIR 2S & DJI Smart Controller ...

. PGYTECH Mavic Mini UV Filter (Professional) is made to reduce the blue tint caused by UV rays & effectively protects the camera lens.. The lens utilizes SCHOTT Optical Glass high-definition grinding treatment. A nanometer-scale double-sided multi-layer coating process ensures a first-class waterproof oil-proof dust-proof & anti-scratch protector.. The filter weighs only 1.3g & features a quick-fit configuration that does not affect the gimbal calibration... ...

Top Features Ideal for on-the-go shoots. Water Oil and; scratch resistant. High definition images. Quick-release design VND 6-9 Stops (Equivalent to ND64-ND512) Limit the light that enters the lens to guarantee the right exposure. Works well in extremely bright conditions to reduce highlights & balance the overall lighting. Ideal for longer exposures & increased motion blurs. Ideal for on-the-go shoots Rather than waste time swapping out filters as the light changes you can leave this one on & adjust it with a twist. Doesn’t affect the drone’s calibration It only weighs 1.5g & it’s wear resistant Carefully engineered to not affect your drone’s balance. High definition image The filter uses SCHOTT glass as its base material which has been ground & pol-ished multiple times to create a low refractive index for professionals to capture color accurate photos. Water oil & scratch resistant The filter’s double-sided multi-layered coating repels water & oil which makes it easy to keep clean. The filter’s hard coating also makes it scratch resistant.

Specification Material Aluminium Optical Glass. Weight 1.5g. Size 1.79 x 2.27 x 0.52cm

...

Professional protection for videographers. DESIGNED TO FIT ALL OF YOUR MAVIC 2 ACCESSORIES Tough and; lightweight. Extremely portable only 1.44kg. UTILIZES SPACE REASONABLY Stow more stuff with small volume Made from impact engineering PP plastic its unbreakable! Waterproof IP67 & high temperature range (-40 to 80 degrees Celcius) What can be stored?. 1 x Mavic 2 Drone 3 x Batteries 1 x Remote Controller 1 x Filter Set 1 x Mains Charger 1 x Charging Hub 1 x Propeller Set Misc Cables... ...

. The cases of the Eclipse P300 series are directed towards beginners while also offering interesting features for experienced PC enthusiasts. With an RGB-LED power button as well as an LED strip on the left side the Dutch manufacturer offer a range of colourful highlights as you would expect! The unique feature of the Eclipse P300 is without doubt the modern side panel in tempered- as well as tinted glass which offers you a breathtaking view of the installed hardware & an all-round premium appearance. PREMIUM MIDI-TOWER WITH TEMPERED GLASS WINDOW and; LED LIGHTING The Phanteks Eclipse P300 Midi-Tower offered here hails from the Phanteks Eclipse series & makes a striking visual impression with its clean lines & premium perhaps even somewhat reserved design in black. The unibody front panel as well as the large side panel in tinted tempered glass lends the case a very premium look which with the help of the LED lighting beneath the large tempered glass window looks even better. The fins on the top in the front which also help with ventilation offer a welcome contrast to the sleek uniformity of the front panel. In the middle of the front of the lid is located an RGB-LED backlit power button while both audio connectors & USB (Universal Serial Bus) 3.0 ports are situated parallel to the front panel. Even the button for controlling the LEDs is located here on the Eclipse P300. The roof also holds a large removable mesh grill that acts as a dust filter & air vent. MEDIUM-SIZED CASE FOR GAMING GRAPHICS CARDS and; AIO WATER-COOLING Thanks to the black paintwork even the interior of the black Eclipse P300 gives off a premium look the interior is also divided into two parts by means of a PSU shroud. This PSU shroud also conveniently hides the drive bays which are rotated to a 90° angle & these bays allow for tool-free installation of two 35 or 25 data storage devices on the front after removal of the front cover. An SSD can be installed behind the motherboard tray with the help of a Drop-N-Lock SSD bracket & a second bracket can be optionally installed. With 3.5cm of space there is plenty of room for cable management. Velcro cable ties also enable users to guide cables cleanly through the case. Gamers & enthusiasts will be well catered for by the high-end gamer hardware options compatible with the Phanteks Eclipse P300 including compatibility with graphics cards up to 330 mm in length & radiator mounting for Ai O coolers & custom water-cooling. The rear of the case enables 120 mm installation of a 120 mm fan while the front can hold two 120- or 140 mm fans. As an alternative to the front fans a 240 or 280 mm heat exchanger can be installed in the front instead. Besides the pre-installed 120 mm fans in the rear a 120- or 140 mm case fan can be installed in the roof. For those who would like to use a regular CPU cooler on their processor coolers up to 16 cm in height are compatible while power supplies up to 197 mm in length can be installed to provide the gaming system with power. The LED lighting is powered via 12 Volt SATA cable & a 4-pin connector allows the case's LED lighting to be connected to an optional LED controller or motherboard with compatible RGB connectors. Furthermore the case is with the help of the optional RGB motherboard adapters compatible with ASUS Aura Gigabyte RGB Fusion & MSI Mystic Light. These allow the motherboard's lighting to be adjusted to coordinate with the lighting installed within the case the result of this is a gaming PC that can have a matching colour scheme alongside matching LED effects.. ...

. The bar has been set to a new standard with Phanteks release of their first Enthoo series case. Passionate about cooling & the one that brought you the worlds best air coolers Phanteks enters the case arena with their functional design with exceptional cooling possibilities the Enthoo Primo. Accessibility & functionality is what sets the Enthoo Primo on a level of its own. It was constructed from a builders point of view with the closest attention to detail. This Enthoo Primo combines innovative design & rich styling that appeal to builders of any caliber.A glimpse through the split window side panel reveals the clean interior capable of being water cooled air cooled or both.. ...

. Beautifully crafted & engineered to maximize cooling potential with its amazing expansion flexibility the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo without the price tag. This case has multiple radiator support removable ssd bracket closed HDD panel & velcro cable management. The Enthoo Pro trying to establish its own solid reputation like the award winning Enthoo Primo.. ...

. Big on features & small in size the EVOLV ITX is a budget oriented chassis that uses a metal exterior complemented with a tempered glass side panel. The case introduces innovative features for a convenient installation experience in an ITX enclosure such as a unique bracket solution for mounting a radiator on top & a multifunctional bracket for reservoir pump & SSD/HDD. ...

. The new redeveloped blades in PH-F120XP are angled lower to achieve higher air pressure PH-F120XP features new 120mm mounting holes. for case/radiator fan replacement &

Includes:: a 400mm extension cable for enhanced cable management. The. PH-F120XP has a larger base. with a magnetic brushless DC motor to avoid the effects of resonance & for rotational stability. To create better structural strength & reduce the vibration occurrence Phanteks redesigned the back frame of the. PH-F120XP.. With the. noise reduction. challenges in mind we modified the component for lower actuator noise. PCBA for lower electromagnetic noise. brushless motor structure for lower operating noise & frame rib for lower wind & vibration noise..

...

. The new redeveloped blades in. PH-F140SP are angled lower. to achieve. higher air pressure The redesigned MVB blades generate better airflow & produces better performance. It improves the balance of airflow & air pressure when using with as a case fan. The. PH-F140SP. has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance & for rotational stability. To create. better structural strength. & reduce the vibration occurrence Phanteks redesigned the back frame of the PH-F140SP. With the noise reduction challenges in mind we modified the component for lower actuator noise PCBA for lower electromagnetic noise brushless motor structure for lower operating noise & frame rib for lower wind & vibration noise. With 4 LEDs attached to the. PH-F140SP_BK_LED. these fans will make any case more aesthetically appealing. The. ON/OFF switch. allows user to enable or disable the LEDs.. ...