United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Shower Pods
Available
-
Coram Watertight Alcove
Pod Including Bi-Fold
Shower Door 800mm x
800mmEach Coram shower
pod comes complete with a
shower door, available
in a choice of finishes,
together with a choice of
high performance
thermostatic mixer
showers. The overlapping
construction of the
shower pod, together
with the waterguard
around the shower door
provide a performance
that is so unbeatable and
reliable we offer a
watertight
guarantee.Product
Information:Bi-fold
Shower door800mm X
800mmHeight is either
2100mm or 2275mm, please
choose option to
suit.Choice of Finishes
from options, White,
Chrome or Polished
SilverThermostatic mixer
shower, please see
optional upgradeIncluding
all pipes and fittings
necessary for
installationEasy clean
and virtually maintenance
freeThe fastest and
easiest
installationMaximum out
of plumb for all walls is
10mmWater supply pipes
and waste connections
must be installed prior
to installation
beginningEach unit comes
packed in three sturdy
cartonsCorams Watertight
Lifetime GuaranteeNB:
Please note that the
coram shower pod will
have a white frame
finish, not the silver
finish as shown in the
main image unless you
choose to upgrade, for a
small additional cost.All
Coram shower pods are
manufactured to order to
your bespoke requirements
with delivery lead times
being between 10 - 20
working days.
Unfortunately as Coram
shower pods are bespoke
to your order the lead
times cannot be any
earlier.Installation:The
walls and base of the
shower pod aresupplied in
two sturdy cartons,
which caneasily be
manoeuvred on site up
stairwellsand through
doorways to the exact
location.The pod is
robustly constructed from
GRP(glass reinforced
polymer) and can be
fitted byone man in the
simple stages shown
below.Position and fit
the fixing batons to the
wall.The back panel can
then be slotted into
position and secured with
a single screw.Locate,
level and fix the
base.Slot the side panels
to the base and fix to
the back wall batons,
using the spacer provided
to ensure that the
correct gap is left for
the back panel.The front
edges of the side panels
can then be secured to
the side wall batons and
the fixing screws will be
concealed by the door
frame.Choose from two
high performance stylish
thermostatic mixer
showersThermostatic
surface-mounted bar mixer
showerThermostatic
built-in concentric mixer
showerWith all shower
pods you have the choice
of two top quality
thermostatic mixer
showers, a surface
mounted bar mixer or a
built-in concentric
control mixer.Both
feature separate flow and
temperature controls and
are suitable for both low
and high pressure water
systems from 0.1bar –
5bar.Fitting the mixerBar
mixer valve - unique
easy-fit systemA special
mounting plate is factory
fitted to the pod wall,
which means that on site
you simply need to
connect themixer to the
hot and cold feeds with
the valve nuts. On the
reverse of the mounting
plate flexible pipes hang
down the back of the unit
and these can be accessed
via the removable panel
at the front of the base
to allow easy attachment
to the piped supplies
with the push-fit
connectors provided. The
rest of the shower
fittings are then simply
screw fixed.Built-in
valveThe built-in valve
is factory fitted, which
means that on site you
simply need to connect
the mixer to the hot and
cold feeds on the reverse
of the valve and connect
the showerhose via the
bulkhead. The rest of the
showerfittings are then
simply screw
fixed.Anti-ligature
sprayheadFor special
commercial application an
anti-ligature fixed
sprayhead is also
available.A unique
mounting plate is factory
fitted to the pod
wall.The mixer simply
connects to the hot and
cold feeds with the valve
nuts. Flexible pipes hang
down the back of the
unit.The pipes are
accessed via the
removable panel at the
front of the base,
allowing easy attachment
to the piped supplies
with the push-fit
connectors
provided.Coram’s shower
doors have been designed
to be faster and easier
to fit than any other on
themarket, which is why
Coram have become a
leading provider of
shower enclosures to
tradeinstallers. Each
shower door is supplied
fully assembled, so that
on site all that is
required is to fit the
handle and then install
it using the wall
channels as shown
below.When fitting the
shower door the first
thing is to position the
wall channels and drill
the screw holes.The door
is finally secured by
drilling through the wall
channels into the door
frame and fixing with
screws.The wall channels
are then slotted onto the
door and screw fixed to
the wall.
Availability: In Stock
£1320.00
Available
-
Coram Alcove Pod
Including Bi-Fold Shower
Door 900mm x 800mmEach
Coram shower pod comes
complete with a shower
door, available in a
choice of finishes,
together with a choice of
high performance
thermostatic mixer
showers. The overlapping
construction of the
shower pod, together
with the waterguard
around the shower door
provide a performance
that is so unbeatable and
reliable we offer a
watertight
guarantee.Product
Information:Bi-fold
Shower door900mm X
800mmHeight is either
2100mm or 2275mm, please
choose option to
suitChoice of Finishes
from options, White,
Chrome or Polished
SilverThermostatic mixer
shower, please see
optional upgradeIncluding
all pipes and fittings
necessary for
installationEasy clean
and virtually maintenance
freeThe fastest and
easiest
installationMaximum out
of plumb for all walls is
10mmWater supply pipes
and waste connections
must be installed prior
to installation
beginningEach unit comes
packed in three sturdy
cartonsWatertight
Lifetime GuaranteeNB:
Please note that the
coram shower pod will
have a white frame
finish, not the silver
finish as shown in the
main image unless you
choose to upgrade, for a
small additional cost.All
Coram shower pods are
manufactured to order to
your bespoke requirements
with delivery lead times
being between 10 - 20
working days.
Unfortunately as Coram
shower pods are bespoke
to your order the lead
times cannot be any
earlier.Installation:The
walls and base of the
shower pod aresupplied in
two sturdy cartons,
which caneasily be
manoeuvred on site up
stairwellsand through
doorways to the exact
location.The pod is
robustly constructed from
GRP(glass reinforced
polymer) and can be
fitted byone man in the
simple stages shown
below.Position and fit
the fixing batons to the
wall.The back panel can
then be slotted into
position and secured with
a single screw.Locate,
level and fix the
base.Slot the side panels
to the base and fix to
the back wall batons,
using the spacer provided
to ensure that the
correct gap is left for
the back panel.The front
edges of the side panels
can then be secured to
the side wall batons and
the fixing screws will be
concealed by the door
frame.Choose from two
high performance stylish
thermostatic mixer
showersThermostatic
surface-mounted bar mixer
showerThermostatic
built-in concentric mixer
showerWith all shower
pods you have the choice
of two top quality
thermostatic mixer
showers, a surface
mounted bar mixer or a
built-in concentric
control mixer.Both
feature separate flow and
temperature controls and
are suitable for both low
and high pressure water
systems from 0.1bar –
5bar.Fitting the mixerBar
mixer valve - unique
easy-fit systemA special
mounting plate is factory
fitted to the pod wall,
which means that on site
you simply need to
connect themixer to the
hot and cold feeds with
the valve nuts. On the
reverse of the mounting
plate flexible pipes hang
down the back of the unit
and these can be accessed
via the removable panel
at the front of the base
to allow easy attachment
to the piped supplies
with the push-fit
connectors provided. The
rest of the shower
fittings are then simply
screw fixed.Built-in
valveThe built-in valve
is factory fitted, which
means that on site you
simply need to connect
the mixer to the hot and
cold feeds on the reverse
of the valve and connect
the showerhose via the
bulkhead. The rest of the
showerfittings are then
simply screw
fixed.Anti-ligature
sprayheadFor special
commercial application an
anti-ligature fixed
sprayhead is also
available.A unique
mounting plate is factory
fitted to the pod
wall.The mixer simply
connects to the hot and
cold feeds with the valve
nuts. Flexible pipes hang
down the back of the
unit.The pipes are
accessed via the
removable panel at the
front of the base,
allowing easy attachment
to the piped supplies
with the push-fit
connectors
provided.Coram’s shower
doors have been designed
to be faster and easier
to fit than any other on
themarket, which is why
Coram have become a
leading provider of
shower enclosures to
tradeinstallers. Each
shower door is supplied
fully assembled, so that
on site all that is
required is to fit the
handle and then install
it using the wall
channels as shown
below.When fitting the
shower door the first
thing is to position the
wall channels and drill
the screw holes.The door
is finally secured by
drilling through the wall
channels into the door
frame and fixing with
screws.The wall channels
are then slotted onto the
door and screw fixed to
the wall.
Availability: In Stock
£1465.20
Available
-
Coram Watertight Quadrant
Pod Including Premier
Polished Silver Sliding
Door 950mm x 950mmEach
Coram shower pod comes
complete with a shower
door, available in a
choice of finishes,
together with a choice of
high performance
thermostatic mixer
showers. The overlapping
construction of the
shower pod, together
with the waterguard
around the shower door
provide a performance
that is so unbeatable and
reliable we offer a
watertight
guarantee.Product
Information:Quadrant
Sliding Shower door950mm
x 950mmHeight is either
2100mm or 2275mm, please
choose option to
suit.Polished Silver
FrameThermostatic mixer
shower, please see
optional upgradeIncluding
all pipes and fittings
necessary for
installationEasy clean
and virtually maintenance
freeThe fastest and
easiest
installationMaximum out
of plumb for all walls is
10mmWater supply pipes
and waste connections
must be installed prior
to installation
beginningEach unit comes
packed in three sturdy
cartonsWatertight
Lifetime GuaranteeNB:
Please note that the
coram shower pod will
have a white frame
finish, not the silver
finish as shown in the
main image unless you
choose to upgrade, for a
small additional cost.All
Coram shower pods are
manufactured to order to
your bespoke requirements
with delivery lead times
being between 10 - 20
working days.
Unfortunately as Coram
shower pods are bespoke
to your order the lead
times cannot be any
earlier.Installation:The
walls and base of the
shower pod aresupplied in
two sturdy cartons,
which caneasily be
manoeuvred on site up
stairwellsand through
doorways to the exact
location.The pod is
robustly constructed from
GRP(glass reinforced
polymer) and can be
fitted byone man in the
simple stages shown
below.Position and fit
the fixing batons to the
wall.The back panel can
then be slotted into
position and secured with
a single screw.Locate,
level and fix the
base.Slot the side panels
to the base and fix to
the back wall batons,
using the spacer provided
to ensure that the
correct gap is left for
the back panel.The front
edges of the side panels
can then be secured to
the side wall batons and
the fixing screws will be
concealed by the door
frame.Choose from two
high performance stylish
thermostatic mixer
showersThermostatic
surface-mounted bar mixer
showerThermostatic
built-in concentric mixer
showerWith all shower
pods you have the choice
of two top quality
thermostatic mixer
showers, a surface
mounted bar mixer or a
built-in concentric
control mixer.Both
feature separate flow and
temperature controls and
are suitable for both low
and high pressure water
systems from 0.1bar –
5bar.Fitting the mixerBar
mixer valve - unique
easy-fit systemA special
mounting plate is factory
fitted to the pod wall,
which means that on site
you simply need to
connect themixer to the
hot and cold feeds with
the valve nuts. On the
reverse of the mounting
plate flexible pipes hang
down the back of the unit
and these can be accessed
via the removable panel
at the front of the base
to allow easy attachment
to the piped supplies
with the push-fit
connectors provided. The
rest of the shower
fittings are then simply
screw fixed.Built-in
valveThe built-in valve
is factory fitted, which
means that on site you
simply need to connect
the mixer to the hot and
cold feeds on the reverse
of the valve and connect
the showerhose via the
bulkhead. The rest of the
showerfittings are then
simply screw
fixed.Anti-ligature
sprayheadFor special
commercial application an
anti-ligature fixed
sprayhead is also
available.A unique
mounting plate is factory
fitted to the pod
wall.The mixer simply
connects to the hot and
cold feeds with the valve
nuts. Flexible pipes hang
down the back of the
unit.The pipes are
accessed via the
removable panel at the
front of the base,
allowing easy attachment
to the piped supplies
with the push-fit
connectors
provided.Coram’s shower
doors have been designed
to be faster and easier
to fit than any other on
themarket, which is why
Coram have become a
leading provider of
shower enclosures to
tradeinstallers. Each
shower door is supplied
fully assembled, so that
on site all that is
required is to fit the
handle and then install
it using the wall
channels as shown
below.When fitting the
shower door the first
thing is to position the
wall channels and drill
the screw holes.The door
is finally secured by
drilling through the wall
channels into the door
frame and fixing with
screws.The wall channels
are then slotted onto the
door and screw fixed to
the wall.
Availability: In Stock
£1320.00
Available
-
Coram Watertight Corner
Entry Pod Including
Shower Door 800mm x
800mmEach coram shower
pod comes complete with a
shower door, available
in a choice of finishes,
together with a choice of
high performance
thermostatic mixer
showers. The overlapping
construction of the
shower pod, together
with the waterguard
around the shower door
provide a performance
that is so unbeatable and
reliable we offer a
watertight
guarantee.Product
Information:Corner Entry
Shower door800mm X
800mmHeight is either
2100mm or 2275mm, please
choose option to
suit.Choice of Finishes
from options, White
orThermostatic mixer
shower, please see
optional upgradeIncluding
all pipes and fittings
necessary for
installationEasy clean
and virtually maintenance
freeThe fastest and
easiest
installationMaximum out
of plumb for all walls is
10mmWater supply pipes
and waste connections
must be installed prior
to installation
beginningEach unit comes
packed in three sturdy
cartonsCorams Watertight
Lifetime GuaranteeNB:
Please note that the
coram shower pod will
have a white frame
finish, not the silver
finish as shown in the
main image unless you
choose to upgrade, for a
small additional cost.All
Coram shower pods are
manufactured to order to
your bespoke requirements
with delivery lead times
being between 10 - 20
working days.
Unfortunately as Coram
shower pods are bespoke
to your order the lead
times cannot be any
earlier.Installation:The
walls and base of the
shower pod aresupplied in
two sturdy cartons,
which caneasily be
manoeuvred on site up
stairwellsand through
doorways to the exact
location.The pod is
robustly constructed from
GRP(glass reinforced
polymer) and can be
fitted byone man in the
simple stages shown
below.Position and fit
the fixing batons to the
wall.The back panel can
then be slotted into
position and secured with
a single screw.Locate,
level and fix the
base.Slot the side panels
to the base and fix to
the back wall batons,
using the spacer provided
to ensure that the
correct gap is left for
the back panel.The front
edges of the side panels
can then be secured to
the side wall batons and
the fixing screws will be
concealed by the door
frame.Choose from two
high performance stylish
thermostatic mixer
showersThermostatic
surface-mounted bar mixer
showerThermostatic
built-in concentric mixer
showerWith all shower
pods you have the choice
of two top quality
thermostatic mixer
showers, a surface
mounted bar mixer or a
built-in concentric
control mixer.Both
feature separate flow and
temperature controls and
are suitable for both low
and high pressure water
systems from 0.1bar –
5bar.Fitting the mixerBar
mixer valve - unique
easy-fit systemA special
mounting plate is factory
fitted to the pod wall,
which means that on site
you simply need to
connect themixer to the
hot and cold feeds with
the valve nuts. On the
reverse of the mounting
plate flexible pipes hang
down the back of the unit
and these can be accessed
via the removable panel
at the front of the base
to allow easy attachment
to the piped supplies
with the push-fit
connectors provided. The
rest of the shower
fittings are then simply
screw fixed.Built-in
valveThe built-in valve
is factory fitted, which
means that on site you
simply need to connect
the mixer to the hot and
cold feeds on the reverse
of the valve and connect
the showerhose via the
bulkhead. The rest of the
showerfittings are then
simply screw
fixed.Anti-ligature
sprayheadFor special
commercial application an
anti-ligature fixed
sprayhead is also
available.A unique
mounting plate is factory
fitted to the pod
wall.The mixer simply
connects to the hot and
cold feeds with the valve
nuts. Flexible pipes hang
down the back of the
unit.The pipes are
accessed via the
removable panel at the
front of the base,
allowing easy attachment
to the piped supplies
with the push-fit
connectors
provided.Coram’s shower
doors have been designed
to be faster and easier
to fit than any other on
themarket, which is why
Coram have become a
leading provider of
shower enclosures to
tradeinstallers. Each
shower door is supplied
fully assembled, so that
on site all that is
required is to fit the
handle and then install
it using the wall
channels as shown
below.When fitting the
shower door the first
thing is to position the
wall channels and drill
the screw holes.The door
is finally secured by
drilling through the wall
channels into the door
frame and fixing with
screws.The wall channels
are then slotted onto the
door and screw fixed to
the wall.
Availability: In Stock
£1099.00
Available
-
Coram Watertight Alcove
Pod Pod Including Sliding
Shower Door 1200mm x
800mmEach shower pod
comes complete with a
shower door, available
in a choice of finishes,
together with a choice of
high performance
thermostatic mixer
showers. The overlapping
construction of the
shower pod, together
with the waterguard
around the shower door
provide a performance
that is so unbeatable and
reliable we offer a
watertight
guarantee.Product
Information:Sliding
Shower door1200mm X
800mmHeight is either
2100mm or 2275mm, please
choose option to
suitChoice of Finishes
from options, White,
Chrome or Polished
SilverThermostatic mixer
shower, please see
optional upgradeIncluding
all pipes and fittings
necessary for
installationEasy clean
and virtually maintenance
freeThe fastest and
easiest
installationMaximum out
of plumb for all walls is
10mmWater supply pipes
and waste connections
must be installed prior
to installation
beginningEach unit comes
packed in three sturdy
cartonsWatertight
Lifetime GuaranteeNB:
Please note that the
coram shower pod will
have a white frame
finish, not the silver
finish as shown in the
main image unless you
choose to upgrade, for a
small additional cost.All
Coram shower pods are
manufactured to order to
your bespoke requirements
with delivery lead times
being between 10 - 20
working days.
Unfortunately as Coram
shower pods are bespoke
to your order the lead
times cannot be any
earlier.Installation:The
walls and base of the
shower pod aresupplied in
two sturdy cartons,
which caneasily be
manoeuvred on site up
stairwellsand through
doorways to the exact
location.The pod is
robustly constructed from
GRP(glass reinforced
polymer) and can be
fitted byone man in the
simple stages shown
below.Position and fit
the fixing batons to the
wall.The back panel can
then be slotted into
position and secured with
a single screw.Locate,
level and fix the
base.Slot the side panels
to the base and fix to
the back wall batons,
using the spacer provided
to ensure that the
correct gap is left for
the back panel.The front
edges of the side panels
can then be secured to
the side wall batons and
the fixing screws will be
concealed by the door
frame.Choose from two
high performance stylish
thermostatic mixer
showersThermostatic
surface-mounted bar mixer
showerThermostatic
built-in concentric mixer
showerWith all shower
pods you have the choice
of two top quality
thermostatic mixer
showers, a surface
mounted bar mixer or a
built-in concentric
control mixer.Both
feature separate flow and
temperature controls and
are suitable for both low
and high pressure water
systems from 0.1bar –
5bar.Fitting the mixerBar
mixer valve - unique
easy-fit systemA special
mounting plate is factory
fitted to the pod wall,
which means that on site
you simply need to
connect themixer to the
hot and cold feeds with
the valve nuts. On the
reverse of the mounting
plate flexible pipes hang
down the back of the unit
and these can be accessed
via the removable panel
at the front of the base
to allow easy attachment
to the piped supplies
with the push-fit
connectors provided. The
rest of the shower
fittings are then simply
screw fixed.Built-in
valveThe built-in valve
is factory fitted, which
means that on site you
simply need to connect
the mixer to the hot and
cold feeds on the reverse
of the valve and connect
the showerhose via the
bulkhead. The rest of the
showerfittings are then
simply screw
fixed.Anti-ligature
sprayheadFor special
commercial application an
anti-ligature fixed
sprayhead is also
available.A unique
mounting plate is factory
fitted to the pod
wall.The mixer simply
connects to the hot and
cold feeds with the valve
nuts. Flexible pipes hang
down the back of the
unit.The pipes are
accessed via the
removable panel at the
front of the base,
allowing easy attachment
to the piped supplies
with the push-fit
connectors
provided.Coram’s shower
doors have been designed
to be faster and easier
to fit than any other on
themarket, which is why
Coram have become a
leading provider of
shower enclosures to
tradeinstallers. Each
shower door is supplied
fully assembled, so that
on site all that is
required is to fit the
handle and then install
it using the wall
channels as shown
below.When fitting the
shower door the first
thing is to position the
wall channels and drill
the screw holes.The door
is finally secured by
drilling through the wall
channels into the door
frame and fixing with
screws.The wall channels
are then slotted onto the
door and screw fixed to
the wall.
Availability: In Stock
£1557.60
Denmark