More From Contributor

£5.90
The From the Anvil Mortice Plate Black is to be used with hand forged window fasteners & to be fitted with the narrowest part of the opening at the top. It measures at 76mm x 19mm &, sold individually, comes complete with fixings. Black Plate The plate has a black finish
- this is baked in a high-temperature oven to give it good durability & can be used internally or externally. To remove dirt deposits, simply wipe over with a lightly oiled cloth from time-to-time & this will restore it to its original condition. Other Variations It is also available in pewter or beeswax finishes -...
...
Archived Product
£21.92
The From the Anvil Mushroom Mortice/ Rim Door Knob Set Polished Brass has detachable roses enabling it to be used with a rim lock or mortice lock/latch. The knobs measure at 51mm x 51mm with 51mm roses & project 51mm from the door. The set comes complete with two knobs, threaded spindles (in two lengths
- 120mm & 100mm) & fixings. Polished Brass Door Knobs The door knobs have a polished brass finish & can be used internally or externally.
...
Archived Product
£12.44
The From the Anvil Narrow Spring Unit Cassette is designed to increase the tension & performance of an old lock which is too weak for unsprung handles. When fitting it, the face of the door must be cut into so that the cassette fits flush with the surface & sits behind the door handle. The size is 63mm x 25mm & the thickness is 6mm. Sold individually, each cassette comes complete with fixings. ...
Archived Product
£36.52
The From the Anvil Narrow UPVC Espagnolette Door Handle Black has a stunning twist detail on the handle & is designed to be ...
Archived Product
£51.92
The From the Anvil Narrow UPVC Espagnolette Door Handle Pewter has a stunning twist detail on the handle & is designed to be ...
Archived Product
£22.96
The From the Anvil Night-Vent Locking RH Monkeytail Fastener Pewter is screw fixing & when used, there is no need for trickle vents. The keep plate will screw to a mullion with a 20mm flat, leaving more room for mouldings. It is a right hand fastener & can be locked in the night-vent & closed positions with an allen key
- the nylon washer behind the handle is designed to reduce friction. The handle length is 136mm x 44mm, the fixing plate size is 60mm x 16mm & the keep plate size is 57mm x 16mm. Sold individually, the fastener comes complete with fixings. Pewter Fastener The fastener...
...
Archived Product
£16.45
The From the Anvil Night-Vent Locking LH Monkeytail Fastener Beeswax is screw fixing & when used, there is no need for trickle vents. The keep plate will screw to a mullion with a 20mm flat, leaving more room for mouldings. It is a left hand fastener & can be locked in the night-vent & closed positions with an allen key
- the nylon washer behind the handle is designed to reduce friction. The handle length is 136mm x 44mm, the fixing plate size is 60mm x 16mm & the keep plate size is 57mm x 16mm. Sold individually, the fastener comes complete with fixings. Beeswax Fastener The fastene...
...
Archived Product
£25.60
The From the Anvil Night-Vent Locking Peardrop LH Fastener Beeswax is screw fitted & there is no need for trickle vents. The keep plate will fit to a mullion with a 20mm flat & this will leave more room for mouldings. It can be locked in the closed & night-vent positions with an allen key. The handle length is 136mm x 44mm, the fixing plate is 60mm x 16mm & the keep plate is 57mm x 16mm. It is sold individually complete with fixing screws. Beeswax Fastener The fastener has a beeswax finish
- this is the most authentic finish for steel! Once forged, the colours are preserved with pure...
...
Archived Product
£24.20
The From the Anvil Night-Vent Locking Peardrop LH Fastener Black is screw fitted & there is no need for trickle vents. The keep plate will fit to a mullion with a 20mm flat & this will leave more room for mouldings. It can be locked in the closed & night-vent positions with an allen key. The handle length is 136mm x 44mm, the fixing plate is 60mm x 16mm & the keep plate is 57mm x 16mm. It is sold individually complete with fixing screws. Black Fastener The fastener has a black finish
- this is baked in a high-temperature oven to give it good durability & can be used internally or e...
...
Archived Product
£30.16
The From the Anvil Night-Vent Locking Peardrop LH Fastener Pewter is screw fitted & there is no need for trickle vents. The keep plate will fit to a mullion with a 20mm flat & this will leave more room for mouldings. It can be locked in the closed & night-vent positions with an allen key. The handle length is 136mm x 44mm, the fixing plate is 60mm x 16mm & the keep plate is 57mm x 16mm. It is sold individually complete with fixing screws. Pewter Fastener The fastener has a pewter patina finish
- this has anti-corrosion properties & can be used internally or externally. To remove di...
...
Archived Product

From The Anvil Night Vent Locking Monkeytail LH Fastener Pewter

The From the Anvil Night-Vent Locking LH Monkeytail Fastener Pewter is screw fixing and when used, there is no need for trickle vents. The keep plate will screw to a mullion with a 20mm flat, leaving more room for mouldings. It is a left hand fastener and can be locked in the night-vent and closed positions with an allen key - the nylon washer behind the handle is designed to reduce friction. The handle length is 136mm x 44mm, the fixing plate size is 60mm x 16mm and the keep plate size is 57mm x 16mm. Sold individually, the fastener comes complete with fixings. Pewter Fastener The fastener.. .
RIP - This product is no longer available on our network. It was last seen on 31.03.2015

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
Availability: In Stock
£22.96

Product Description

The From the Anvil Night-Vent Locking LH Monkeytail Fastener Pewter is screw fixing & when used, there is no need for trickle vents. The keep plate will screw to a mullion with a 20mm flat, leaving more room for mouldings. It is a left hand fastener & can be locked in the night-vent & closed positions with an allen key
- the nylon washer behind the handle is designed to reduce friction. The handle length is 136mm x 44mm, the fixing plate size is 60mm x 16mm & the keep plate size is 57mm x 16mm. Sold individually, the fastener comes complete with fixings. Pewter Fastener The fastener.. .

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Nylon - A family of synthetic polymers
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Key - A physical or virtual device or code used for opening something
Size - is the measurement of how big an object is in space.
Fixings - An action of sticking an item to another surface.

Supplier Information

Handles 4 Doors
Page Updated: 2023-02-01 10:31:11

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu