More From Contributor

The Excel Hardware 3623 Euro Escutcheon Dual Chrome has a 53mm diameter. This is to be used with a euro profile deadlock & cylinder; some of these can be found in the related products or in the Hinges, Locks & Latches category. This escutcheon is made from zinc alloy & has a dual polished & satin chrome finish - Orpheus, Chronos, Atlas, Artemis, Arc, Argo, Aura & Ultimo handles in the Excel Hardware range. It is also available with a standard profile & this variation can be found in the related products. ...

Archived Product

The Excel Hardware 400mm (19mm Diameter) Guardsman Pull Handle SSS has a straight tubular shape. It is suitable for use in most environments, especially where a hardwearing handle is required. This handle is made from Grade 304 stainless steel & has a satin stainless steel finish. Bolt Through Fixing The handles are sold individually & come complete with bolt through fixings
- if you are just fitting one handle we recommend that you use a finger plate on the other side. Back to Back Fixings Sold Separately Should you wish to use handles for both sides of the door, back to back fixings...
...

Archived Product

The Excel Hardware 400mm (25mm Diameter) Guardsman Pull Handle SSS has a straight tubular shape. It is suitable for use in most environments, especially where a hardwearing handle is required. This handle is made from Grade 304 stainless steel & has a satin stainless steel finish. Bolt Through Fixing The handles are sold individually & come complete with bolt through fixings
- if you are just fitting one handle we recommend that you use a finger plate on the other side. Back to Back Fixings Sold Separately Should you wish to use handles for both sides of the door, back to back fixings...
...

Archived Product

The Excel Hardware 50mm Plain Circular Flush Pull Handle PSS has a classic modern shape & is commonly used on sliding wardrobe doors & cupboard doors; set flush into the door it is an ideal low profile flush pull. Other Variations There are also satin stainless steel & 70mm versions of this handle available & some of these can be found in the related products. ...

Archived Product

The Excel Hardware 50mm Plain Circular Flush Pull Handle SSS has a classic modern shape & is commonly used on sliding wardrobe doors & cupboard doors; set flush into the door it is an ideal low profile flush pull. Other Variations There are also polished stainless steel & 70mm versions of this handle available & some of these can be found in the related products. ...

Archived Product

The Excel Hardware 600mm (25mm Diameter) Guardsman Pull Handle SSS has a straight tubular shape. It is suitable for use in most environments, especially where a hardwearing handle is required. This handle is made from Grade 304 stainless steel & has a satin stainless steel finish. Bolt Through Fixing The handles are sold individually & come complete with bolt through fixings
- if you are just fitting one handle we recommend that you use a finger plate on the other side. Back to Back Fixings Sold Separately Should you wish to use handles for both sides of the door, back to back fixings...
...

Archived Product

The Excel Hardware Stainless Steel Bathroom Deadbolt is designed for use with separate bathroom turns & releases. It comes in the standard sizes; 63mm case with a 45mm backset. Stainless Steel Finish The deadbolt is made from zinc alloy & has a grade 403 satin stainless steel finish. Bathroom Emergency Release Function It is a current building regulation that any lock fitted to bathroom door must be capable of being opened from the outside in an emergency. Hence, please ensure you fit appropriate door furniture which allows for quick release in an emergency.&n... ...

Archived Product

The Excel Hardware 63mm (2.5") Bolt Through Tubular Mortice Latch Electro Brass is specifically designed to be used with lever handles on roses, as it is pierced to accept bolt through fixings, & we would recommend it for the less expensive & mid range levers. It can be used with both levers on rose & levers on backplate, even though the lever sets do not require bolt through fixings. The 63mm latch is typically used with levers on backplates & the 76mm latch is typically used with levers on roses. This latch has a steel case & solid brass latchbolt; the f... ...

Archived Product

The Excel Hardware 63mm (2.5") Bolt Through Tubular Mortice Latch PSS is specifically designed to be used with lever handles on roses, as it is pierced to accept bolt through fixings, & we would recommend it for the less expensive & mid range levers. It can be used with both levers on rose & levers on backplate, even though the lever sets do not require bolt through fixings. The 63mm latch is typically used with levers on backplates & the 76mm latch is typically used with levers on roses. This latch has a steel case & solid brass latchbolt; the forend & strik... ...

Archived Product

The Excel Hardware 63mm (2.5") Stainless Steel Bolt Through Tubular Mortice Latch SSS is for use with internal door handles on backplate & door handles on rose. It has a standard case size of 63mm with a 44mm backset. It can be used on new doors & as replacements for old, worn latches. It will accept a standard 8mm square spindle. This latch is made from zinc alloy & has a satin stainless steel finish. Other Variations The latch is also available with a 76mm case & this can be found in the related products. ...

Archived Product

Excel Hardware 600mm (19mm Diameter) Guardsman Pull Handle SSS

The Excel Hardware 600mm (19mm Diameter) Guardsman Pull Handle SSS has a straight tubular shape. It is suitable for use in most environments, especially where a hardwearing handle is required. This handle is made from Grade 304 stainless steel and has a satin stainless steel finish. Bolt Through Fixing The handles are sold individually and come complete with bolt through fixings - if you are just fitting one handle we recommend that you use a finger plate on the other side. Back to Back Fixings Sold Separately Should you wish to use handles for both sides of the door, back to back fixings...

Availability: Out Of Stock
Supplier: Handles 4 Doors
SKU: XL3823

Description Reviews / Comments Add New

Product Description

The Excel Hardware 600mm (19mm Diameter) Guardsman Pull Handle SSS has a straight tubular shape. It is suitable for use in most environments, especially where a hardwearing handle is required. This handle is made from Grade 304 stainless steel & has a satin stainless steel finish. Bolt Through Fixing The handles are sold individually & come complete with bolt through fixings
- if you are just fitting one handle we recommend that you use a finger plate on the other side. Back to Back Fixings Sold Separately Should you wish to use handles for both sides of the door, back to back fixings...