These finest top quality brushes leave the competition standing, manufactured to the highest specifications. They are perfect for heavier cleaning jobs, removing paint, rust, scale, carbon & adhesive etc. They produce an excellent surface for painting or polishing Different size threads for use on SINGLE HAND GRINDERS. Read " How-To Strip Car Underside To Bare Metal " from our Technical Article for more useful tips.   ...

Doorskin installation has traditionally been a tedious task, done with a hammer & dolly. This tool provides a better way! Rolls over the door skin edge without ripples or other distortion. Single hand operation leaves the other hand free to hold the work piece. Smooth plastic insert prevents marring external surface. Adjustable for thickness to allow for proper spacing for panel adhesives. Produces a factory looking crimp.

Includes:: an instructional DVD.

...

Its vital to keep the resin: glass ratio of 2-2.5: 1 correct & air out. After wetting & placing the first layer of matting down, roll resin through & then only apply more when needed. Repeat with another layer if necessary; this will save resin & improve the properties of the laminate. 3" & 6" Paddle Rollers and  Single Wheel Rollers are available, as well as a set of the 3 rollers. See the How Do I work with Fibreglass? article in the Technical Articles section ...

The SIP 1/2" Reversible Key Chuck Air Drill has a double reduction planetary gearing for enhanced power, side-mounted lever, & is ideal for honing, drilling, reaming & more. 700rpm maximum operating speed 90psi (6.3 bar) average operating pressure 4CFM (114 litres/min) average air consumption One-handed side-mounted forward/reverse lever Double reduction planetary gearing for high power Ideal for cylinder honing, drilling, reaming, & more Integrated handle exhaust with built-in muffler Handy adjustable side handle Quality 1/2" key-type chuck 1/4" BSP air inlet Technical Description: Speed 700rpm Operating Pressure 90psi (6.3 bar) Chuck Type/ Size Key Chuck
- 1/2" Air Consumption 4.0CFM (114 litres/min) Air Inlet 1/4" BSP Sound Pressure (Lp A) 81.1d B (A) Sound Power (Lw A) 92.1d B (A) Vibration 1.2m/s² Packaged

Dimensions 51 x 160 x 235mm Additional Planetary geared


...

230v (13amp) input supply Highly powerful 1400w motor 20 litre maximum tank capacity Quick drain plug for easy removal Built-in vacuum/detergent settings Switch between different modes Easy-to-use ready for operation Solid & durable construction

Includes:: several accessories: Detergent attachments Floor brush attachments Durable crevice tool The SIP Lifting & Automotive collection features a large range of heavy-duty equipment suitable for garages, workshops, mobile maintenance, roadside recovery, general repair, & more.

...

The SIP 6" Trade Bench Grinder is suitable for trade applications, including tool sharpening, & is built for performance through a powerful induction motor & a tough metal housing. 230v (13amp) input supply Powerful 250w induction motor 3000rpm working wheel speed 6" (150mm) grinder wheel diameter ½" (13mm) bore size, ¾" (20mm) width Super durable, heavy-duty metal housing Precision-sealed lubricated spindle bearings Adjustable tool rests, spark arrestors, eye shields, & wheel guards are all included SIP are machinery specialists, with our catalogue featuring welding, metalwork, air compressors & tools, battery chargers, lifting, heating, power, woodworking, & cleaning equipment. Technical Description: Input Supply 230v (13amp) Motor Power 250w (0.33hp) Wheel Speed 3000rpm Wheel Diameter 6" (150mm) Wheel Width 3/4" (20mm) Bore Size 1/2" (12.7mm) Wire Wheel No NVR Switch No Protection IP23 Gross Weight 6.29kg Packaged

Dimensions 240 x 260 x 360mm

...

The SIP Advanced Battery Charger GX10 is the ultimate tool for charging, support & diagnostics, combining intelligent charging, maintenance, supply, reconditioning, & testing in one process. 12v output voltage, 10A output current Energy-efficient charging for high cost savings Multi-step microprocessor-controlled charging Integrated alternator & battery test features Automatic maintenance mode on all batteries Suitable for ATVs, motorcycles, cars, vans, boats, & trucks for high versatility in all applications Perfect for Lead Acid; AGM, GEL (+ Ca-Ca), WET, EFB Start-Stop, & all Li Fe PO4 battery types Reconditioned, supply, test, lead, lithium modes Supplied with quick connector, 12v DC car adaptor, clamps, & eyelets accessories High-quality advanced digital interface GX10 has full Can-Bus compatibility Fitted with reliable spark protection Swiss design SIP Industrial are machinery specialists, with the SIP catalogue of products including welding, metalwork, air compressors & tools, power, cleaning, charging, heating, automotive, & more. Product Specifications: Output Voltage: 12v Output Current: 10A Charging Steps: 10 STEPS Input Voltage: 230v @ 50-60 Hz Cable Length: 2000mm Digital Interface: Yes Can-Bus Compatible: Yes Reconditioned Mode: Yes Protection Level: IP65 Net Weight: 0.62kg Gross Weight: 0.72kg Product Dimensions: 200 (H) x 180 (W) x 65mm (D) Packaged Dimensions: 320 (H) x 225 (W) x 85mm (D) ...

The SIP Advanced Battery Charger GX5 is the ultimate tool for charging, support & diagnostics, combining intelligent charging, maintenance, supply, reconditioning, & testing in one process. 12v output voltage, 5A output current Energy-efficient charging for high cost savings Multi-step microprocessor-controlled charging Integrated alternator & battery test features Automatic maintenance mode on all batteries Suitable for ATVs, motorcycles, cars, vans, boats, & trucks for high versatility in all applications Perfect for Lead Acid; AGM, GEL (+ Ca-Ca), WET, EFB Start-Stop, & all Li Fe PO4 battery types Reconditioned, supply, test, lead, lithium modes Supplied with quick connector, 12v DC car adaptor, clamps, & eyelets accessories High-quality advanced digital interface GX5 has full Can-Bus compatibility Fitted with reliable spark protection Swiss design SIP Industrial are machinery specialists, with the SIP catalogue of products including welding, metalwork, air compressors & tools, power, cleaning, charging, heating, automotive, & more. Product Specifications: Output Voltage: 12v Output Current: 5A Charging Steps: 8 STEPS Input Voltage: 110
- 240v @ 50-60 Hz Cable Length: 1800mm Digital Interface: Yes Can-Bus Compatible: Yes Reconditioned Mode: Yes Protection Level: IP65 Net Weight: 0.28kg Gross Weight: 0.38kg Product Dimensions: 145 (H) x 125 (W) x 50mm (D) Packaged Dimensions: 260 (H) x 165 (W) x 70mm (D)
...

SIP 6 Air Compressor The SIP 6 is an oil-free, direct drive compressor with a convenient panel hosting an easy-to-read gauge & ergonomic dials. The compact 6 litre barrel is ideal for mobile trade applications. Technical Description: Input Supply 230v (13amp) Motor Power 1.5hp (1.1k W) Receiver Size 6 litres Piston Displacement 6.4CFM (181 litres/min) Max. Free Air Delivery 4CFM (113 litres/min) Maximum Pressure 116psi (8 bar) Noise Level 97d B (A) Gross Weight 9.3kg Packaged

Dimensions 370 x 355 x 315mm

...

SIP Aluminium Wire 0.5kg x 0.8mm. 0.5kg x 0.8mm spool size Manufactured for precision Designed for all MIG welding Supplied in display packaging Other display packs available ...