POR15 Engine Enamel is better than any other paint! Why? Because it contains 80% solid pigment, & therefore less solvent to evaporate into thin air, so providing a deeper, richer colour. Easily applied without leaving streaky brush marks. This durable direct to metal coating creates a smooth, high-gloss finish that withstands the rigours of the engine compartment while improving the look & preventing corrosion of the metal components. It's formulated to match O.E.M standards & to keep engine surfaces from pitting & rusting & deliver the look & performance expected from POR15. POR-15 Engine Enamels are available in pints (473ml)
- enough to do a whole engine. Temp range 150°C (300°F) For the best result, we recommend to clean the engine first with POR15 Cleaner Degreaser then etch metal surfaces with POR15 Metal Prep Read " How Do I Clean & Paint My Engine? " from our Technical Article for more information. Colours Available: Aluminium, Black, Buick Green, Buick Turquoise, Chevy Orange, Chrysler Blue, Chrysler Hemi Orange, Ford Blue, Ford, Corporate Blue, Ford Medium Blue, Ford Green, Ford Red, Hi Po Yellow, Olds Gold, Pontiac Metallic Light Blue, Pontiac Light Blue, Cadillac Dark Blue, Chrysler Turquoise, White
...

Now prime & paint right over cured POR-15 with POR15 High Build Primer (was Tie-Coat Primer). This special "interlocking"  primer for painting over the top of POR 15 without any need to rough up or de-gloss. This primer is a tough yet sandable single component polyurethane primer, with special adhestion characteristics that make it perfect for most painted surfaces. It is highly resistant to penetrating topcoats, like lacquers, enamels, two-components finishes. It sands very smoothly too. 473ml (US Pint) NOT suitable for use with cellulose paints.   Surface Preparation: Surface to be coated should be free of grease, oil, & foreign substances. POR15 Cleaner Degreaser is ideal for this. The best method for over-coating POR-15 Rust Preventive Paint with POR15 High Build Primer is to first clean the surface with Cleaner Degreaser & then apply a coat of POR-15 Self-Etching Primer, following directions on the can. Then, over-coating with Tie-Coat can be done at any stage. Or lightly sand the  POR15 Rust Preventive Paint with 320 grit sand paper & topcoat with POR15 High Build Primer. * Other Painted Surfaces Clean with  POR 15 Cleaner Degreaser & paint with  POR-15 Self-Etching Primer following directions on the can; then over-coat with POR 15 High Build Primer. OR clean with  POR15 Cleaner Degreaser & sand with 240 grit & then overcoat with POR15 High Build Primer. Thinning: POR15 High Build Primer may be thinned up to 10% with POR15 Solvent (10 parts Primer to 1 part Solvent). Thinning may not be required if primer is to be brushed on. Application: Stir POR15 High Build Primer thoroughly before using. Do not shake as this will create air bubbles. Apply by brush or spray. Apply in thin coats. If applied too heavily, drying time will be lengthened considerably. If a second coat is desired, wait a minimum of 12 hours before applying. You may sand between coats of primer, but adhesion will be better if you do not. Sand after final coat of primer has fully dried (24 hours). Top-coating Allow a minimum of 24 hours before applying any topcoat over the POR15 High Build Primer. Failure to allow enough time before applying topcoats may result in spidering or crinkling of finish. NOTE: In temperatures below 64 deg.F (18deg.C) cure times can lengthen considerably. POR15 High Build Primer is solvent-cured not moisture-cured, so allow extra days for curing in a low temperature environment.  High Build Primer will not cure in temperatures below 52 deg. F (12 deg. C). ...

Now prime & paint right over cured POR-15 with POR15 High Build Primer (was Tie-Coat Primer). This special "interlocking"  primer for painting over the top of POR 15 without any need to rough up or de-gloss. This primer is a tough yet sandable single component polyurethane primer, with special adhestion characteristics that make it perfect for most painted surfaces. It is highly resistant to penetrating topcoats, like lacquers, enamels, two-components finishes.  It sands very smoothly too. 946ml (US Quart) NOT suitable for use with cellulose paints. Surface Preparation: Surface to be coated should be free of grease, oil, & foreign substances. POR15 Cleaner Degreaser is ideal for this. The best method for over-coating POR-15 Rust Preventive Paint with POR15 High Build Primer is to first clean the surface with Cleaner Degreaser & then apply a coat of POR-15 Self-Etching Primer, following directions on the can. Then, over-coating with Tie-Coat can be done at any stage. Or lightly sand the  POR15 Rust Preventive Paint with 320 grit sand paper & topcoat with POR15 High Build Primer. * Other Painted Surfaces Clean with  POR 15 Cleaner Degreaser & paint with  POR-15 Self-Etching Primer following directions on the can; then over-coat with POR 15 High Build Primer. OR clean with  POR15 Cleaner Degreaser & sand with 240 grit & then overcoat with POR15 High Build Primer. Thinning: POR15 High Build Primer may be thinned up to 10% with POR15 Solvent (10 parts Primer to 1 part Solvent). Thinning may not be required if primer is to be brushed on. Application: Stir POR15 High Build Primer thoroughly before using. Do not shake as this will create air bubbles. Apply by brush or spray. Apply in thin coats. If applied too heavily, drying time will be lengthened considerably.   If a second coat is desired, wait a minimum of 12 hours before applying. You may sand between coats of primer, but adhesion will be better if you do not. Sand after final coat of primer has fully dried (24 hours). Top-coating Allow a minimum of 24 hours before applying any topcoat over the POR15 High Build Primer. Failure to allow enough time before applying topcoats may result in spidering or crinkling of finish. NOTE: In temperatures below 64 deg.F (18deg.C) cure times can lengthen considerably. POR15 High Build Primer is solvent-cured not moisture-cured, so allow extra days for curing in a low temperature environment.  High Build Primer will not cure in temperatures below 52 deg. F (12 deg. C). ...

NEW SIZE
- MORE OPTIONS! POR15 High Temp Aluminium (aka POR-20) Heat Resistant Paint is guaranteed up to 650 deg C without peeling
...

NEW SIZE
- MORE OPTIONS! POR15 High Temp Aluminium (aka POR-20) Heat Resistant Paint is guaranteed up to 650 deg C without peeling
...

NEW SIZE
- MORE OPTIONS! POR-15 High Temp Flat Black Heat Resistant Paint (Black Velvet) is guaranteed up to 650 deg C without
...

NEW SIZE
- MORE OPTIONS! POR-15 High Temp Flat Black Heat Resistant Paint (Black Velvet) is guaranteed up to 650 deg C without
...

NEW SIZE
- MORE OPTIONS! POR-15 High Temp Manifold Grey Heat Resistant paint is guaranteed up to 650 deg C without peeling or flaking.
...

POR15 High Temp Aluminium (aka POR-20) Heat Resistant Paint is guaranteed up to 650 deg C without peeling or flaking. Can even be used on turbochargers POR-15 high temperature coating is extremely resistant to the weather including salt & moisture. Two thin coats are recommended the first is air dried the second is cured at 150 deg C either in an oven or by the engine. Can be brushed or sprayed. Use POR 15 Solvent to thin. Lacquer thinner may be used for cleanup. Available: Aerosol 15oz, 236ml, 946ml (US Quart) ...

POR-15 High Temperature Manifold Grey Heat Resistant paint is guaranteed up to 650 deg C without peeling or flaking. Can even be used on turbochargers. POR15 high temperature coating is extremely resistant to the weather including salt & moisture. Two thin coats are recommended the first is air dried the second is cured at 150 deg C either in an oven or by the engine. Can be brushed or sprayed. Use POR 15 Solvent to thin. Lacquer thinner may be used for cleanup. Available: Aerosol 15oz, 236ml, 946ml (US Quart) ...