Seals Tanks against fuels containing ETHANOL The POR-15 Petrol Tank Sealer is the finest tank sealer you will ever use & the only tank sealer you will recommend. The tough flexible coating chemically bonds to the inside of your tank forming an incredibly strong permanent seal. POR-15 Fuel Tank Sealer is totally resistant to all fuels, alcohols & petrol additives. It seals leaking seams, cracks & pinholes stopping all further corrosion dead in its tracks. A leaking fuel tank can be deadly; welding a tank is suicidal. POR15 will restore your tank as good as new. DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! Please note for complete protection, please use the Cleaner/ Degreaser & the Metal Prep prior to using the sealer. Otherwise the sealer may not adhere properly to the surface. Kit of all three products 3 sizes available:
- 8oz (236ml) will seal a 4-1/2 US Gallon tank (17 litres, 3-3/4 UK gallons)
- US Pint (473ml) will seal a 9 US Gallon tank (34 litres, 7-1/2 UK gallons)
- US Quart (946ml) will seal a 18 US Gallon tank (68 litres, 15 UK gallons) Not Suitable for Plastic & Fibreglass Tanks. See " How Do I Seal a Fuel Tank?" articles in the Technical Articles section


...

Seals Tanks against fuels containing ETHANOL The POR-15 Petrol Tank Sealer is the finest tank sealer you will ever use & the only tank sealer you will recommend. The tough flexible coating chemically bonds to the inside of your tank forming an incredibly strong permanent seal. POR-15 Fuel Tank Sealer is totally resistant to all fuels, alcohols & petrol additives. It seals leaking seams, cracks & pinholes stopping all further corrosion dead in its tracks. A leaking fuel tank can be deadly; welding a tank is suicidal. POR15 will restore your tank as good as new. DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! Please note for complete protection, please use the Cleaner/ Degreaser & the Metal Prep prior to using the sealer. Otherwise the sealer may not adhere properly to the surface. 3 sizes available:
- 8oz (236ml) will seal a 4-1/2 US Gallon tank (17 litres, 3-3/4 UK gallons)
- US Pint (473ml) will seal a 9 US Gallon tank (34 litres, 7-1/2 UK gallons)
- US Quart (946ml) will seal a 18 US Gallon tank (68 litres, 15 UK gallons) Not Suitable for Plastic & Fibreglass Tanks. See " How Do I Seal a Fuel Tank?" articles in the Technical Articles section


...

Seals Tanks against fuels containing ETHANOL The POR-15 Petrol Tank Sealer is the finest tank sealer you will ever use & the only tank sealer you will recommend. The tough flexible coating chemically bonds to the inside of your tank forming an incredibly strong permanent seal. POR-15 Fuel Tank Sealer is totally resistant to all fuels, alcohols & petrol additives. It seals leaking seams, cracks & pinholes stopping all further corrosion dead in its tracks. A leaking fuel tank can be deadly; welding a tank is suicidal. POR15 will restore your tank as good as new. DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! Please note for complete protection, please use the Cleaner/ Degreaser & the Metal Prep prior to using the sealer. Otherwise the sealer may not adhere properly to the surface. Kit of all three products 3 sizes available:
- 8oz (236ml) will seal a 4-1/2 US Gallon tank (17 litres, 3-3/4 UK gallons)
- US Pint (473ml) will seal a 9 US Gallon tank (34 litres, 7-1/2 UK gallons)
- US Quart (946ml) will seal a 18 US Gallon tank (68 litres, 15 UK gallons) Not Suitable for Plastic & Fibreglass Tanks. See " How Do I Seal a Fuel Tank?" articles in the Technical Articles section


...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Gloss Black, Semi Gloss Black, Clear, Grey & Silver. Available in two

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)     APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section


























...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Gloss Black, Semi Gloss Black, Clear, Grey & Silver. Available in two

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)     APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section


























...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Gloss Black, Semi Gloss Black, Clear, Grey & Silver. Available in two

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) US Gallon 3.78l (which covers approx 35 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)     APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section


























...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Black, Semi Gloss Black, Grey. Available in three

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) US Gallon 3.78l (which covers approx 35 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)   APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section


























...

POR15 Engine Enamel is better than any other paint! Why? Because it contains 80% solid pigment, & therefore less solvent to evaporate into thin air, so providing a deeper, richer colour. Easily applied without leaving streaky brush marks. This durable direct to metal coating creates a smooth, high-gloss finish that withstands the rigours of the engine compartment while improving the look & preventing corrosion of the metal components. It's formulated to match O.E.M standards & to keep engine surfaces from pitting & rusting & deliver the look & performance expected from POR15. POR-15 Engine Enamels are available in pints (473ml)
- enough to do a whole engine. Temp range 150°C (300°F) For the best result, we recommend to clean the engine first with POR15 Cleaner Degreaser then etch metal surfaces with POR15 Metal Prep Read " How Do I Clean & Paint My Engine? " from our Technical Article for more information. Colours Available: Aluminium, Black, Buick Green, Buick Turquoise, Chevy Orange, Chrysler Blue, Chrysler Hemi Orange, Ford Blue, Ford, Corporate Blue, Ford Medium Blue, Ford Green, Ford Red, Hi Po Yellow, Olds Gold, Pontiac Metallic Light Blue, Pontiac Light Blue, Cadillac Dark Blue, Chrysler Turquoise, White
...

Now prime & paint right over cured POR-15 with POR15 High Build Primer (was Tie-Coat Primer). This special "interlocking"  primer for painting over the top of POR 15 without any need to rough up or de-gloss. This primer is a tough yet sandable single component polyurethane primer, with special adhestion characteristics that make it perfect for most painted surfaces. It is highly resistant to penetrating topcoats, like lacquers, enamels, two-components finishes. It sands very smoothly too. 473ml (US Pint) NOT suitable for use with cellulose paints.   Surface Preparation: Surface to be coated should be free of grease, oil, & foreign substances. POR15 Cleaner Degreaser is ideal for this. The best method for over-coating POR-15 Rust Preventive Paint with POR15 High Build Primer is to first clean the surface with Cleaner Degreaser & then apply a coat of POR-15 Self-Etching Primer, following directions on the can. Then, over-coating with Tie-Coat can be done at any stage. Or lightly sand the  POR15 Rust Preventive Paint with 320 grit sand paper & topcoat with POR15 High Build Primer. * Other Painted Surfaces Clean with  POR 15 Cleaner Degreaser & paint with  POR-15 Self-Etching Primer following directions on the can; then over-coat with POR 15 High Build Primer. OR clean with  POR15 Cleaner Degreaser & sand with 240 grit & then overcoat with POR15 High Build Primer. Thinning: POR15 High Build Primer may be thinned up to 10% with POR15 Solvent (10 parts Primer to 1 part Solvent). Thinning may not be required if primer is to be brushed on. Application: Stir POR15 High Build Primer thoroughly before using. Do not shake as this will create air bubbles. Apply by brush or spray. Apply in thin coats. If applied too heavily, drying time will be lengthened considerably. If a second coat is desired, wait a minimum of 12 hours before applying. You may sand between coats of primer, but adhesion will be better if you do not. Sand after final coat of primer has fully dried (24 hours). Top-coating Allow a minimum of 24 hours before applying any topcoat over the POR15 High Build Primer. Failure to allow enough time before applying topcoats may result in spidering or crinkling of finish. NOTE: In temperatures below 64 deg.F (18deg.C) cure times can lengthen considerably. POR15 High Build Primer is solvent-cured not moisture-cured, so allow extra days for curing in a low temperature environment.  High Build Primer will not cure in temperatures below 52 deg. F (12 deg. C). ...

Now prime & paint right over cured POR-15 with POR15 High Build Primer (was Tie-Coat Primer). This special "interlocking"  primer for painting over the top of POR 15 without any need to rough up or de-gloss. This primer is a tough yet sandable single component polyurethane primer, with special adhestion characteristics that make it perfect for most painted surfaces. It is highly resistant to penetrating topcoats, like lacquers, enamels, two-components finishes.  It sands very smoothly too. 946ml (US Quart) NOT suitable for use with cellulose paints. Surface Preparation: Surface to be coated should be free of grease, oil, & foreign substances. POR15 Cleaner Degreaser is ideal for this. The best method for over-coating POR-15 Rust Preventive Paint with POR15 High Build Primer is to first clean the surface with Cleaner Degreaser & then apply a coat of POR-15 Self-Etching Primer, following directions on the can. Then, over-coating with Tie-Coat can be done at any stage. Or lightly sand the  POR15 Rust Preventive Paint with 320 grit sand paper & topcoat with POR15 High Build Primer. * Other Painted Surfaces Clean with  POR 15 Cleaner Degreaser & paint with  POR-15 Self-Etching Primer following directions on the can; then over-coat with POR 15 High Build Primer. OR clean with  POR15 Cleaner Degreaser & sand with 240 grit & then overcoat with POR15 High Build Primer. Thinning: POR15 High Build Primer may be thinned up to 10% with POR15 Solvent (10 parts Primer to 1 part Solvent). Thinning may not be required if primer is to be brushed on. Application: Stir POR15 High Build Primer thoroughly before using. Do not shake as this will create air bubbles. Apply by brush or spray. Apply in thin coats. If applied too heavily, drying time will be lengthened considerably.   If a second coat is desired, wait a minimum of 12 hours before applying. You may sand between coats of primer, but adhesion will be better if you do not. Sand after final coat of primer has fully dried (24 hours). Top-coating Allow a minimum of 24 hours before applying any topcoat over the POR15 High Build Primer. Failure to allow enough time before applying topcoats may result in spidering or crinkling of finish. NOTE: In temperatures below 64 deg.F (18deg.C) cure times can lengthen considerably. POR15 High Build Primer is solvent-cured not moisture-cured, so allow extra days for curing in a low temperature environment.  High Build Primer will not cure in temperatures below 52 deg. F (12 deg. C). ...