POR15 Top Coat Flat Gray is a direct to metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion. To prevent the corrosion process, we thoroughly recommend applying the POR-15 Top Coat over POR-15 Rust Preventive Under exposure to sunlight & weather POR-15 Top Coat Flat Gray has exceptional long term gloss & colour retention. POR 15 Top Coat can be applied directly to metal substrates, with no need for a primer or undercoat, & is formulated to form a robust barrier that sheds moisture to provide long lasting protection. POR-15 Top Coat has excellent adhesion & when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion. Non porous & will not crack, chip, or peel Amazing scratch & abrasion resistance Not sensitive to UV light Can be applied over POR-15 or other paints. See the How Do I Stop Rust Permanently with POR-15 Solutions? article in the Technical Articles section The quart (946ml)of POR15 top coat will coat Approx. 100 sq. ft. with a single coat. The pint (473ml) will coat Approx. 50 sq. ft. with a single coat. The same coverage rates as standard POR15, however we do suggest thinning the product with our POR15 Solvent (part 40404) when applying by brush or spraying as it is a much thicker product. Typically our suggested thinning rate varies between 10-20%. DIRECTION Stir contents well, then dispense a portion into a separate container & seal can at once, keeping lid & grooves clean to avoid permanently sealing can shut. Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken. Best Dispensing Method: Use coffee scoop or pouring spout. Do not put left-over paint back into can. Thin only with POR-15 Solvent, if necessary. Apply in thin, covering coats. SURFACE PREPARATION Surface to be coated should be dry & free of grease, oil, & other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water & allow to dry. APPLYING OVER OTHER PRIMERS Repeat instructions above, then sand surface lightly with 240 grit sandpaper & wipe clean with dry tack cloth & paint. TO PAINT OVER A CURED POR-15 SURFACE Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper & apply one light to medium coat of POR-15 Self-Etching Primer. Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures & humidity recoat at 3-12 hour intervals. Spray or Brush Application: POR-15 Topcoat will need thinning using POR15 Solvent for all spray & brush applications between 10-20%. Use 25-35 lbs. (172-240 Kpa) pressure for normal semi-gloss. Cleanup: Use POR-15 Solvent or lacquer thinner for cleanup, which must be done before the top coat dries; once dry it cannot be removed by solvent. POR15 Top Coat can take 3-4 days to reach maximum hardness or longer in temperatures below 55ºF 15ºC. ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...

POR15 Engine Enamel is better than any other paint! Why? Because it contains 80% solid pigment, & therefore less solvent to evaporate into thin air, so providing a deeper, richer colour. Easily applied without leaving streaky brush marks. This durable direct to metal coating creates a smooth, high-gloss finish that withstands the rigors of the engine compartment while improving the look & preventing corrosion of the metal components. It's formulated to match O.E.M standards & to keep engine surfaces from pitting & rusting & deliver the look & performance expected from POR15. POR-15 Engine Enamels are available in pints (473ml)
- enough to do a whole engine. Temp range 150°C (300°F) For the best result, we recommend to clean the engine first with POR15 Cleaner Degreaser then etch metal surfaces with POR15 Metal Prep Read " How Do I Clean & Paint My Engine? " from our Tehcnical Article for more infomation. Colours Available: Aluminium, Black, Buick Green, Buick Turquoise, Chevy Orange, Chrysler Blue, Chrysler Hemi Orange, Ford Blue, Ford, Corporate Blue, Ford Medium Blue, Ford Green, Ford Red, Hi Po Yellow, Olds Gold, Pontiac Metalic Light Blue, Pontiac Light Blue, Cadillac Dark Blue, Chrysler Turquoise, White
...

POR15 Engine Enamel is better than any other paint! Why? Because it contains 80% solid pigment, & therefore less solvent to evaporate into thin air, so providing a deeper, richer colour. Easily applied without leaving streaky brush marks. This durable direct to metal coating creates a smooth, high-gloss finish that withstands the rigors of the engine compartment while improving the look & preventing corrosion of the metal components. It's formulated to match O.E.M standards & to keep engine surfaces from pitting & rusting & deliver the look & performance expected from POR15. POR-15 Engine Enamels are available in pints (473ml)
- enough to do a whole engine. Temp range 150°C (300°F) For the best result, we recommend to clean the engine first with POR15 Cleaner Degreaser then etch metal surfaces with POR15 Metal Prep Read " How Do I Clean & Paint My Engine? " from our Tehcnical Article for more infomation. Colours Available: Aluminium, Black, Buick Green, Buick Turquoise, Chevy Orange, Chrysler Blue, Chrysler Hemi Orange, Ford Blue, Ford, Corporate Blue, Ford Medium Blue, Ford Green, Ford Red, Hi Po Yellow, Olds Gold, Pontiac Metalic Light Blue, Pontiac Light Blue, Cadillac Dark Blue, Chrysler Turquoise, White
...

Seals Tanks against fuels Containing ETHANOL. Please note this kit does not contain the Fuel Preservative & Stabilizer or foam brush Use POR-15 Fuel Tank Repair Kit to create a new tank inside your old one. A leaking petrol tank can be lethal, welding a tank is suicidal
- this kit will put an end to the need for it. To restore your tank as good as new:
- First take POR15 Cleaner Degreaser to remove any old fuel & contaminating deposits in your tank
- Secondly prep your tank with POR15 Metal Prep to remove rust, etch the interior surface, & leave a zinc phosphate coating to prevent further rusting
- Once the surface has completely dried apply POR-15 Tank Sealer to plug any small pinhole leak   DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! The POR-15 Car Tank Repair Kit kit contains:
- 1 x 946ml Cleaner Degreaser (was Marine Clean) dissolve & remove gum & varnish that accumalates over the years.
- 1 x 946ml Metal Prep (was Prep & Ready) to remove rust, etch the interior surface, & leave a zinc phosphate coating to prevent further rusting.
- 1 x Petrol Tank Sealer (946ml) that will seal up to  18 US Gallon tank / 15 UK Gallon (68L) NOT Suitable for Plastic & Fibreglass Tanks See the " How Do I Seal a Fuel Tank?" article in the Technical Articles section Read " Dolly Springs A Leak" to see how Robert sealed his old fuel tank Read " How-To Get Tanked Up with POR15 Fuel Tank Sealer" & see Dave restore an old fuel tank for Project 13/30.






...