PRODUCT DESCRIPTION ONLY USE THE ALLOY PREP WITH THE POR15 2K URETHANE PRODUCTS. PLEASE CLICK HERE FOR THE METAL PREP DESIGNED FOR USE WITH POR15 RUST PREVENTIVE PAINTS, POR15 TOP COATS & POR15 TANK SEALERS  POR-15 Alloy Prep is a water-based metal prep product specifically designed for the following POR-15 coatings: Glisten PC, White Cote, & all Hardnose paints. POR-15 Alloy Prep should always be used when painting directly onto aluminium & other reactive metals such as brass & copper. when used properly according to directions, it will insure a perfect bond every time. POR-15 Alloy Prep is not flammable & has no flashpoint, but protective gloves & goggles should be worn when using it. DIRECTIONS Spray or brush POR-15 Alloy Prep onto metal to be painted & keep wet for two minutes, then wash off with water, dry surface thoroughly, & paint. Leaving AP 120 on aluminium for more than two (2) minutes may result in a slight darkening of the aluminium surface. Keep the bottle tightly closed when not in use. Wear rubber or latex gloves when using. & follow instructions. ...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Gloss Black This

Includes:: POR15 Rust Preventive Paint (113ml). Tin covers up to 12sq feet. Perfect if you don't finish all in once. Also available in two

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)     APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section




























...

Premium Quality 2-part Low Sheen Protective Clear Coat POR-15 ® Matte Clear Coat seals in any colour or patina for a custom low sheen look with amazing results. POR-15 ® Matte Clear Coat is specifically designed to deliver an extreme level of resistance to scuffing & burnishing, & be a leader in waterborne & even traditional matte clear coatings. POR-15 ® Matte Clear Coat is formulated with a low VOC, Waterborne Polyurethane Clear Coat Technology that is silica-free. POR-15 ® Matte Clear Coat has excellent weathering properties & can be used on any substrate that can be cleared with a traditional clear coat. Note:   Always spray a test panel to ensure desired gloss level. Variations in application, temperature, & gun set up can affect the final gloss.

Features: Industry leading level of resistance to scuffing & burnishing Seals in color or patina with custom low sheen look Excellent weathering properties For use over all basecoats & previously base-coated substrates that are properly prepared Waterborne polyurethane clearcoat technology Low VOC

...

POR-15 Motorcycle / Bike Fuel Tank Repair Sealer Kit Seals Tanks against fuels Containing ETHANOL. The POR-15 Motorcycle Tank Repair kit contains everything you need to repair & restore any small fuel tank. DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! This tank repair sealer kit
Includes::
- 1 x 946ml Cleaner Degreaser (was Marine Clean) to dissolve & remove gum & varnish that accumulates over the years;
- 1 x 946ml Metal Prep (was Prep & Ready) to remove rust, etch the interior surface, & leave a zinc phosphate coating to prevent further rusting.
- 1 x POR-15 Petrol Tank Sealer (236ml) that will seal up to 4 1/2 US Gallon tank / 3 3/4 UK Gallon (17L) 
- a brush in case it is necessary to externally reinforce any badly corroded areas.
- Complete with full instructions.   NOT Suitable for Plastic & Fibreglass Tanks POR-15 Fuel Preservative & Stabiliser not included. See the " How Do I Seal a Fuel Tank?" article in the Technical Articles section Read " Dolly Springs A Leak" & see how Robert sealed his old fuel tank. Read " How-To Get Tanked Up with POR15 Fuel Tank Sealer" & see how Dave restored an old fuel tank for Project 13/30.





...

Seals Tanks against fuels Containing ETHANOL. Please note this kit does not contain the Fuel Preservative. Use POR-15 Fuel Tank Repair Kit to create a new tank inside your old one. A leaking petrol tank can be lethal, welding a tank is suicidal
- this kit will put an end to the need for it. To restore your tank as good as new:
- First take POR-15 Marine Clean to remove any old fuel & contaminating deposits in your tank,
- Secondly prep your tank with POR-15 Prep & Ready (formerly Metal Ready).
- Once the surface has completely dried apply POR-15 Tank Sealer to plug any leaks.   DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! The POR-15 Car Tank Repair Kit kit contains:
- 2 x 946ml Cleaner Degreaser (was Marine Clean)
- 1 x 946ml Metal Prep (was Prep & Ready)
- 1 x Petrol Tank Sealer (946ml) that will seal up to 18 US Gallon tank / 15 UK Gallon (68L) NOT Suitable for Plastic & Fibreglass Tanks See the " How Do I Seal a Fuel Tank?" article in the Technical Articles section. Read the " Dolly Springs A Leak" article to see how Robert sealed his old fuel tank. Read " How-To Get Tanked Up with POR15 Fuel Tank Sealer" & see how Dave restore old fuel tank for Project 13/30.






...

How it works All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15® Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15® Cleaner Degreaser to clean parts before using POR-15® Rust Remover.

Features: Fast Acting Formula Safe to Use On Plastic, PVC, Viton, & Most Paints Easy to Use Reusable & Biodegradable No Sanding or Scrubbing Water-Based Professional Results Environmentally Friendly Safe on Delicate Metal Parts Noncorrosive Odorless Will Not Harm Non-Rusted Surfaces Great for: Automotive Parts Farm Equipment Gardening Tools Camping Gear Boat Parts

...

Whilst any paint will provide some degree of protection from rust for a while, no other is as permanent as POR-15. When others have chipped, scratched, flaked, & peeled, POR-15 Rust Preventative Paint will still be preventing rust. Colours available: Gloss Black This

Includes:: 6 x POR15 Rust Preventive Paint (113ml). Each tin covers up to 12sq feet. Perfect if you don't finish all in once. Also available in two

Sizes: US Pint 473ml (which covers approx 4.5 square metres) US Quart 946ml (which covers approx 9 square metres) POR-15 Rust Preventative can be sprayed or brushed on to provide a rock hard, yet flexible, non-porous coating that will not shrink, peel, or crack. It is totally resistant to road salt, petrol, battery acid, etc., & actually dries harder in humid damp conditions. Ideal for suspension & chassis protection, & you can apply a topcoat of any finishing paint. This is protection you can count on. Metal surfaces should be treated first with POR15 Cleaner Degreaser, then use POR-15 Metal Prep to dissolve rust, etch the metal & leave a Zinc Phosphate for better adhesion of  the paint. Use the POR-15 Solvent to thin (if required) & to clean brushes. FEATURES Can be sprayed or brushed Prevents rust from recurring by protecting metal from further exposure to moisture Designed for application directly on rusted or seasoned metal surfaces Dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel (dries faster in humid conditions)
- totally resistant to most acid, petrol  & road salt. UV light sensitive (must be topcoated for prolonged exposure to sunlight)   APPLICATIONS AUTOMOTIVE: suspension
- chassis
- doors -  trunk areas
- engine & fuel tanks
- rusty frames
- floor pans
- corroded battery tray. INDUSTRIAL: heavy equipment
- truck components
- trailers
- fuel storage
- rebar -steel forms
- concrete
- storm grates
- transformers
- wastewater management MARINE: decks
- bilges
- hulls
- stem pipes -chain lockers
- mast. HOME: seal cracks in basement & foundations
- Garage floors
- Roofs
- HVAC
- Pipes
- Beams
- Home appliances. Excellent for sealing & repairing fiberglass. NOTE: Follow instructions on label carefully. See the How Do I Use POR 15 Rust Preventive Paint? article in the Technical Articles section See the How Do I Stop Rust Permanently with POR-15 Solutions article in the Technical Articles section




























...

POR15 Small Fuel Car Tank Repair Kit A Small Fuel Tank Repair Kit From POR-15 that Seals Tanks against fuels Containing ETHANOL. Please note this kit does not contain the Fuel Preservative & Stabiliser or foam brush Use POR-15 Small Fuel Tank Repair Kit to create a new tank inside your old one. A leaking petrol tank can be lethal, welding a tank is suicidal
- this kit will put an end to the need for it. To restore your tank as good as new:
- First take POR-15 Cleaner Degreaser to remove any old fuel & contaminating deposits in your tank,
- Secondly prep your tank with POR-15 Metal Prep.
- Once the surface has completely dried apply POR-15 Tank Sealer to plug any leaks.   DO NOT PUT LID BACK ON THE CAN ONCE OPENED OR IT MAY EXPLODE! The POR-15 Car Fuel Tank Repair Kit contains: 1 x 946ml Cleaner Degreaser (was Marine Clean) dissolve & remove gum & varnish that accumalates over the years. 1 x 946ml Metal Prep (was Prep & Ready) to remove rust, etch the interior surface, & leave a zinc phosphate coating to prevent further rusting. 1 x Petrol Tank Sealer (473ml) that will seal up to 9 US Gallon tank  / 7 1/2 UK Gallon (34L) This Fuel Car Tank Repair Kit is NOT Suitable for Plastic & Fibreglass Tanks See the " How Do I Seal a Fuel Tank?" articles in the Technical Articles section Read " Dolly Springs A Leak" & see how Robert sealed his old fuel tank. Read " How-To Get Tanked Up with POR15 Fuel Tank Sealer" & see how Dave restored an old fuel tank for Project 13/30.



...

POR15 Top Coat Flat Gray is a direct to metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion. To prevent the corrosion process, we thoroughly recommend applying the POR-15 Top Coat over POR-15 Rust Preventive Under exposure to sunlight & weather POR-15 Top Coat Flat Gray has exceptional long term gloss & colour retention. POR 15 Top Coat can be applied directly to metal substrates, with no need for a primer or undercoat, & is formulated to form a robust barrier that sheds moisture to provide long lasting protection. POR-15 Top Coat has excellent adhesion & when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion. Non porous & will not crack, chip, or peel Amazing scratch & abrasion resistance Not sensitive to UV light Can be applied over POR-15 or other paints. See the How Do I Stop Rust Permanently with POR-15 Solutions? article in the Technical Articles section The quart (946ml)of POR15 top coat will coat Approx. 100 sq. ft. with a single coat. The pint (473ml) will coat Approx. 50 sq. ft. with a single coat. The same coverage rates as standard POR15, however we do suggest thinning the product with our POR15 Solvent (part 40404) when applying by brush or spraying as it is a much thicker product. Typically our suggested thinning rate varies between 10-20%. DIRECTION Stir contents well, then dispense a portion into a separate container & seal can at once, keeping lid & grooves clean to avoid permanently sealing can shut. Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken. Best Dispensing Method: Use coffee scoop or pouring spout. Do not put left-over paint back into can. Thin only with POR-15 Solvent, if necessary. Apply in thin, covering coats. SURFACE PREPARATION Surface to be coated should be dry & free of grease, oil, & other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water & allow to dry. APPLYING OVER OTHER PRIMERS Repeat instructions above, then sand surface lightly with 240 grit sandpaper & wipe clean with dry tack cloth & paint. TO PAINT OVER A CURED POR-15 SURFACE Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper & apply one light to medium coat of POR-15 Self-Etching Primer. Allow to cure for 30 Minutes at 68ºF (20ºC), or longer in cooler temperatures. Apply POR15 Top Coat as final finish. Depending on temperatures & humidity recoat at 3-12 hour intervals. Spray or Brush Application: POR-15 Topcoat will need thinning using POR15 Solvent for all spray & brush applications between 10-20%. Use 25-35 lbs. (172-240 Kpa) pressure for normal semi-gloss. Cleanup: Use POR-15 Solvent or lacquer thinner for cleanup, which must be done before the top coat dries; once dry it cannot be removed by solvent. POR15 Top Coat can take 3-4 days to reach maximum hardness or longer in temperatures below 55ºF 15ºC. ...

Check out our super-tough POR-15 2K Urethane paint. 2K Urethane paints are tough, glossy, two component coatings for use over primed or painted surfaces. When fully cured, 2K Urethane paints are rock hard, chemical resistant & incredibly tough. Durable & easily cleaned, they will not crack, chip, or peel with age. These beautiful, two-component coatings are stronger than any colour paints you have ever tried. The long lasting brilliant colours will look terrific wherever you use them & will withstand incredible abuse. This two component coating won't chip, peel or fade & dries without brush marks. Note: When applying over polished reactive metals (aluminum, chrome, brass, copper etc) you must use AP120 Metal Prep according to instructions to achieve the ultimate clear finish. IDEAL USES: As a protective coating on aluminum wheels, chrome bumpers, marine railings, chrome or aluminum covers, grills, handles, ornaments, lights, etc COLOURS: Black, Blue, Grey, Red, Yellow, Green, Clear (was formerly known as Glisten PC) & White (as known as Whitecote). ...