Heavy-duty steel welding table. Portable & fold-able for ease of transportation & storage. Sturdy locking pin system & adjustable foot for eliminating wobble when in use. ...

Frost Strip Gel (1 Litre) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   2 Sizes Available: 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.  
...

Frost Strip Gel (5 Litre) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   2 Sizes Available: 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.    
...

Frost Strip Gel (500 ml) Frost Strip Gel provides a superior aircraft-grade formulation resulting in a highly effective paint remover that quickly lifts the toughest automotive coatings from metal surfaces. Its heavy-bodied consistency provides excellent vertical hold perfect for upright & difficult to reposition projects. The Frost Strip Gel formula is safe for all types of automotive metal. Fast-acting
- Results in 5 Minutes Thick Gel Formula for Vertical Surfaces Removes Multiple Layers of Automotive & Industrial Paints & Finishes Safe for all Automotive Metal saves your valuable time Please take care when opening. Pull tab under the screw top as product may splash out. When surface area is free of paint rinse surface area with warm soapy water then rinse again with clean fresh water & dry immediately.   3 Sizes Available: 500ml, 1 Litre, 5 Litres 2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.    
...

Frost Tank Strip Liquid (5 Litre) Frost Strip removes any coating from any surface, will not damage Glass, Chrome, Aluminium or Factory Fiberglass. Remove any coating from any surface without damaging window glass, chrome, or weatherstrip. Can also be used to strip old sealer from inside a fuel tank. We strongly recommend resealing once stripped to protect the tank. Please take care when opening. Pull tab under the screw top as product may splash out.   2 Sizes Available: 1 Litre 5 Litres   2 Variations  Available: Frost Tank Stripper –  with the consistency of water. Spray or brush on. Frost Strip Gel –  thick gel formula for vertical surfaces.   * Please note Frost Strip is for industrial use by trained professionals only, follow safety precautions as stated in the instructions.   ...

Make straight or curved cuts effortlessly with the hand lever throatless shear. It has 100mm long curved blades. Easily cuts 2mm mild steel, adjustable blades provide for burr free cutting. This throatless metal cutting shear is suitable for making long cuts, with its 100mm long curved blades. It can cut up to 2mm steel, 1mm Stainless Steel & 3mm Aluminium. With regards to the distortion, a certain amount does occur as one side of the material is forced upwards whilst the other is forced down. Size L49 X W33 X H20cm Now also available replacement blades (G836)   Please note colour of product may vary ...

Hotcoat Powder Coating (1 LB) for Hot Coat Powder Coating Gun. Powder coating means that you can coat & cure metal parts in less than an hour, & provides an extremely durable finish that is dent & chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, & contains no environmentally harmful solvents. Also available: Eastwood Hot Coat Powder Coating Colour Sample Kit Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz) 3 Steps: Strip & Clean your metal part before coating Coat the entire part – you can’t overcoat Cure your part in an electrical oven for about 20 minutes

Features: • Professional results • Quick colour changes • Durable finish • Easy set-up, easy to use, & easy to clean-up • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint & does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven & bake for 15 minutes. Easy set-up, easy to use, & easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply & a dedicated electric oven. Colours Available: Blue- Jet Black
- Orange
- Brown
- Yellow
- Green
- Bright Red
- Silver
- White
- Graphite Black (NOTE: Exact colours are difficult to show, due to display settings) RAL Numbers: Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021









...

From our large range of specialised aerosols comes this high quality silicone spray, which leaves trim surfaces gleaming. Trim Sheen is a fast economical way to reproduce an attractive & durable finish to dashboard, trims & all vinyl surfaces. ...

Steel tube is used for all kinds of fabrication work (motorbike frames, racing car chassis, roll bars, welding trolleys, go-karts, etc.) but can be tricky when you want to make neat butt welded T-joints. Frost Pipe Notcher is designed for use with any h&-held drill or drill press. Uses standard hole saw blades (not included) up to 2 inch diameter.

Features:
- Compound angle adjustment up to 60 degrees
- Easy to read angle scales
- Join round & rectangular Tubes
- Holds up to 2" dia round tube or 2" x 2-1/2" rectangular tubes





...

Foaming Tyre Dressing washes away dirt & grime, dries leaving a beautifully prepared tyre, ready to show. Does not crack or peel. Will not harm wheels or trims. ...