Features at a glance: Hydraulic hand pump unit powers 1000kg capacity ram & yoke assembly Up to 50% quicker than using other ratchet driven spring compressors Equipped with two pairs of spring yokes Suitable for springs from 80mm ID to 165mm OD Net Weight: 22kg Maximum Extension: 270mm Piston Travel: 240mm Yoke Specification:

Size: Capacity (Spring Diameter): Small: ID80-OD122mm Large: ID110-OD165mm  

...

Frost Carnauba Wash & Wax has been specially blended drawing on years of professional experience to give your vehicle a premium quality smear-free finish on all surfaces
- Even when the vehicle is wet! The immediate benefit from this special solution is that there is no need to dry the vehicle. Just let it drip dry & your vehicle will have a brilliant polished showroom finish!

Features: Premium quality with high percentage of Carnauba wax Highly concentrated (1:100 dilutable) Deep shine & smear free finish Suitable for all makes & models of cars, bikes & caravans. Directions: Simply add 50ml of Frost Carnauba Wash & Wax into 5ltrs of warm water. Agitate the solution & apply to the vehicle surface with a soft sponge or brush to produce a cream foam to loosen the general grime. Rinse the vehicle with clean water & allow to dry. (Optional Chamois Leather or Micro Fibre Cloth for extra shine.)


...

Frost Pro Ultra Etch primer is an outstanding all-purpose epoxy etch primer that provides excellent adhesion & corrosion prevention on sheet steel, zinc-coated steel, aluminium & anodized aluminium. It is very fast drying with excellent flow out & can be used wet-on-wet with a super smooth finish. ...

The centre piece of the traditional sheet metal workers bench, the 11 inch diameter sandbag hollows with blows of the bossing mallet allowing the metal to stretch to the shape required. Made from best quality leather, hand stitched for strength, sand bag is supplied empty requiring filling with dry silver sand through a velcro side opening. ...

Pneumatic Planishing Hammer

Includes:: filter, oiler & foot pedal. Has hardened steel hammer head. Overall

...

An amazing & environmentally friendly rust remover! It has been proven to effectively remove even deep rust from all types of mild steel & iron. Frost Rust Remover is safe on all surfaces & will not harm copper, brass aluminium, plastic, rubber or vinyl. It is non-toxic, non-flammable, biodegradable & contains no acids, alkalis or petroleum solvents. Simple to use with effective result. You can reuse Frost Rust Remover several times until its performance starts to deteriorate. It is safe for use in fuel tanks, spray cabinets, ultrasonic cleaners, pressure washers, pumps & vats. Available in 1L, 5L or 25L.

Features: Effectively remove even deep rust. Easy to use & reusable several times. Non-toxic, non-corrosive, non-flammable. Safe on all surfaces including Copper, Brass, Aluminium, Mild Steel & Iron. Directions: Step 1: Remove dirt & pre-clean item. Step 2: Rinse then completely immerse item in the solution for 1-12 hours depending on the depth & age of the rust. Check progress periodically. Step 3: Once rust is removed, rinse item well with water. * For fuel tank de-rusting: Completely fill the tank with Frost Rust Remover & rotate the tank every hour until the rust has been removed. Drain completely & rinse well with water. Air dry & fill with petrol immediately to eliminate flash rust.

...

An amazing & environmentally friendly rust remover! It has been proven to effectively remove even deep rust from all types of mild steel & iron. Frost Rust Remover is safe on all surfaces & will not harm copper, brass aluminium, plastic, rubber or vinyl. It is non-toxic, non-flammable, biodegradable & contains no acids, alkalis or petroleum solvents. Simple to use with effective result. You can reuse Frost Rust Remover several times until its performance starts to deteriorate. It is safe for use in fuel tanks, spray cabinets, ultrasonic cleaners, pressure washers, pumps & vats. Available in 1L, 5L or 25L.

Features: Effectively remove even deep rust. Easy to use & reusable several times. Non-toxic, non-corrosive, non-flammable. Safe on all surfaces including Copper, Brass, Aluminium, Mild Steel & Iron. Directions: Step 1: Remove dirt & pre-clean item. Step 2: Rinse then completely immerse item in the solution for 1-12 hours depending on the depth & age of the rust. Check progress periodically. Step 3: Once rust is removed, rinse item well with water. * For fuel tank de-rusting: Completely fill the tank with Frost Rust Remover & rotate the tank every hour until the rust has been removed. Drain completely & rinse well with water. Air dry & fill with petrol immediately to eliminate flash rust.

...

An amazing & environmentally friendly rust remover! It has been proven to effectively remove even deep rust from all types of mild steel & iron. Frost Rust Remover is safe on all surfaces & will not harm copper, brass aluminium, plastic, rubber or vinyl. It is non-toxic, non-flammable, biodegradable & contains no acids, alkalis or petroleum solvents. Simple to use with effective result. You can reuse Frost Rust Remover several times until its performance starts to deteriorate. It is safe for use in fuel tanks, spray cabinets, ultrasonic cleaners, pressure washers, pumps & vats. As well as being used for general rust application, Frost Rust Remover can be utilised to target deep rust from the entire cooling system. It uses the latest technology in rust & corrosion removal to completely revitalise automotive cooling systems.   It removes rust scale & deposits from radiators, water pumps, water jackets, engine blocks, & heads. During Summer months rust can be just as much of a problem as rust & corrosion act as an insulator, causing vehicles to overheat. This product restores the engine's ability to transfer heat to the coolant allowing engines to run cooler & last longer.  Contains non-toxic, non-corrosive & non-flammable ingredients meaning it will not harm or clog your engine. Available in 1L, 5L or 25L.

Features: Effectively remove even deep rust. Easy to use & reusable several times. Non-toxic, non-corrosive, non-flammable. Safe on all surfaces including Copper, Brass, Aluminium, Mild Steel & Iron. Directions: Step 1: Remove dirt & pre-clean item. Step 2: Rinse then completely immerse item in the solution for 1-12 hours depending on the depth & age of the rust. Check progress periodically. Step 3: Once rust is removed, rinse item well with water. * For fuel tank de-rusting: Completely fill the tank with Frost Rust Remover & rotate the tank every hour until the rust has been removed. Drain completely & rinse well with water. Air dry & fill with petrol immediately to eliminate flash rust.

...

Blast rust, corrosion & paint on large parts in an enclosed cabinet to keep dust off the floor & out of the air; Heavy steel construction, single door on the side; Transparent glass viewing window; Air compressor delivery of 40-80PSI & 15-25CFM; Overall dimensions: 150cm (H) x 83cm (L) x 63cm (W) ...

Clean parts quickly and easily; Through the sealed gloves parts, you control the high-efficiency air blast gun inside, directing 100 maximum PSI abrasive flow to clean parts fast; For use with glass beads, silica s&, alum oxide & more; Transparent plastic top door; Air compressor delivery of 100PSE & 5CFM ...