Euro Universal Male Screwed Adaptor 1/4 BSP (5 Pack) Product

Features: Euro Universal Male Adaptor. 1/4 BSP

...

European Plug Adaptor (2 Pin)
- Can be used with our Powder Goating Gun ...

EVAPO-RUST is an amazing rust eliminator! A product of extensive research, Evapo Rust rust remover is an environmentally-safe water-based product that removes rust in minutes. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. Removes even heavy rust completely Non-toxic, non-corrosive, safe on skin No fumes or bad odours, non-flammable, no VOC's Biodegradable, water soluble Requires no special equipment Will not harm unrusted steel, safe on other metals Will not affect plastic, PVC, Viton & most paints It's very easy to use Evapo Rust to fix all of your rust problems. All it takes is 4 simple steps:   Step 1: Pre-clean the item to remove oil & dirt. In a container, pour a sufficient amount of EVAPO-RUST to completely cover the rusted object.         Step 2: Rinse item & immerse the rusty object in the solution & leave it for 1-12 hours depending on the depth & age of rust
- You can leave it overnight for extremely heavy rust. Check progress periodically.         Step 3: Once rust is removed, rinse item with water. If deep rust remains in pits, re-immerse item until all the rust is gone. Un-rusted metal will not be affected. NOTE: This stage is very important in getting the best results       Step 4: To prevent re-rusting, simply dip the item into new Evapo-Rust solution. Then allow item to air dry. This will prevent rust for up to two weeks.           Evapo-Rust can be used over & over until performance drops off & the solution turns completely black. When ready to dispose of Evapo-Rust, only the iron content of the solution will dictate the disposal method. In most cases, it can be safely put down the drain. To prevent rust from coming back, use a rust inhibitor after de-rusting.
...

EVAPO-RUST is an amazing rust eliminator! A product of extensive research,   Evapo Rust rust remover is an environmentally-safe water-based product that removes rust in minutes. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. Removes even heavy rust completely Non-toxic, non-corrosive, safe on skin No fumes or bad odours, non-flammable, no VOC's Biodegradable, water soluble Requires no special equipment Will not harm unrusted steel, safe on other metals Will not affect plastic, PVC, Viton & most paints It's very easy to use Evapo Rust to fix all of your rust problems. All it takes is 4 simple steps:   Step 1: Pre-clean the item to remove oil & dirt. In a container, pour a sufficient amount of EVAPO-RUST to completely cover the rusted object.         Step 2: Rinse item & immerse the rusty object in the solution & leave it for 1-12 hours depending on the depth & age of rust
- You can leave it overnight for extremely heavy rust. Check progress periodically.         Step 3: Once rust is removed, rinse item with water. If deep rust remains in pits, re-immerse item until all the rust is gone. Un-rusted metal will not be affected. NOTE: This stage is very important in getting the best results       Step 4: To prevent re-rusting, simply dip the item into new Evapo-Rust solution. Then allow item to air dry. This will prevent rust for up to two weeks.           Evapo-Rust can be used over & over until performance drops off & the solution turns completely black. When ready to dispose of Evapo-Rust, only the iron content of the solution will dictate the disposal method. In most cases, it can be safely put down the drain. To prevent rust from coming back, use a rust inhibitor after de-rusting.
...

Evapo-Rust® Gel combines the rust removing power of Evapo-Rust® with the ability to cling to vertical, rusted surfaces. Simply brush on & allow an hour to work, then rinse away the rust with water. Also, it is safer than other gelled rust removers. Evapo-Rust get does not harm copper, brass, or aluminium. Brushable Biodegradable Clings to vertical surfaces No VOCs Low Odor Directions 1. Prep rusted surface 2. Apply gel & wait 3. Rinse & wipe clean For best results, do not use in direct sunlight. Use on rusted items at temperatures between 60°F & 90°F. Clean rusted item to remove dirt, oil, grease, & loose rust scales. Apply a thick coat of Evapo-Rust® Gel to the rusted areas. Allow to work for 1 to 2 hours or until rust appears removed. Rinse off. Repeat application on heavily corroded areas. If Evapo-Rust® Gel drys on surface, the gel may require a soft brush & water to remove. ...

70mm x 51mm foil blocked silver logo applied to box lid & note book cover. Small white logo printed on pen. ...

Product

Features: Opens exhaust hose clamps quickly & easily. Ideal for Citroen, Peugeot & Renault exhaust

...

Product

Features: Opens exhaust hose clamps quickly & easily. Ideal for Citroen, Peugeot & Renault exhaust

...

Uses: Full exhaust system assembly, use on manifolds, joints, silencers & any high temperature static assemblies. Suitable for wood & multi fuel stove exhaust assembly & sealing. Temp Range: up to 1100°C ...

Be safe from asphyxiation, when working on your car with the engine running. Fix heatproof flexible pipe from exhaust pipe to window, garage door or outside wall. Complete with clip to exhaust, pipe & exit plate.. The exhaust system has a 1 metre length of very high temp tube & then a 5 metre length of lower temp tube.     ...