The Eastwood Cut-N-Weld Welding Top & Plasma Cutting Tops Patent Pending  are available separately & designed to fit the Eastwood 750 lb. Work Stand (43120) & others with up to a 1.25” tube diameter. Eastwood Cut-N-Weld Work Stand Tops Feature: Constructed of 14 Gauge Steel Warp-Resistant Welding Top Steel Framed Cutting Top Replaceable Cutting Slats Attaches to your Eastwood 750lb. Work Stand Portable & Easy to Store ...

Thi one is CV Boot 19/29 Shaft, 73/112 Joint CV Boot Kit

Includes:: grease, metal straps & full instructions.

...

Thi one is CV Boot 24/34 Shaft, 76/106 Joint CV Boot Kit

Includes:: grease, metal straps & full instructions.

...

Thi one is CV Boot 25/35 Shaft, 80/112 Joint CV Boot Kit

Includes:: grease, metal straps & full instructions.

...

CV Boot Clamps. Stainless Steel. 7mm Band Width. 7mm x 245mm Maximum Working Length. 2pc ...

How do you get a new boot or gater over the CV joint without damage? You slide it over a cone. Simple. ...

A valve seat lubricant & combustion enhancer that protects against valve seat recession, adds up to 4 octane numbers to base fuel. CVL Turbo also provides flame front control allowing engines to run more advanced ignition timing, without danger of pre-ignition or detonation. Enables older engines to run on modern unleaded fuel, & is equally effective in modern engines fitted with knock sensors & catalytic converters. One bottle (500ml) to 20 litres (maximum) unleaded petrol for all motorsport applications. Precise treatment levels should be determined by test bed experimentation. User Benefits: Use with modern fuels to increase octane levels by up to 4 octane numbers (40 points) Provides enhanced performance for race, rally or track day Provides similar flame front control as lead, thereby enabling engines to run more advanced ignition timing without danger of pre-ignition or detonation Mixes with leaded, unleaded, LRP & other fuels containing octane enhancing additives such as oxygenates, ethanol & MTBE Equally effective in modern engines fitted with knock sensors & catalytic convertors Performance Profile: For maximum benefit use in conjunction with premium, higher octane unleaded fuel Used by an increasing number of engine builders to compensate for the deterioration in pump fuel ...

5 Cylindrical Wire Brushes work with your drill to scrape away rust, paint & more with just a pull of the trigger. 5 wire brushes are designed to speed-up the rust & paint removal process on large surfaces, whether flat, contoured or hollow. Use for cleaning tubes, gratings, sleeves & cylinders. Brush section is 2" in diameter, 4" long, 6" long overall ...

A medium/high viscosity, cyanoacrylate based, high performance adhesive which has a multitude of professional uses whenever a strong bond is required coupled with small gap filling properties. For use where slight uneven surfaces are present on metals, plastics, ferrite magnets, rubber & ceramics.

Size: 20gm Viscosity: Low 850
- 1200 c P (Brookfield Spindle 1 / 20rpm / 25ºC) Set Time: 1- 2 seconds (Balsa Wood) Temp Range: -40 to +80ºC A multitude of industrial & professional uses whenever a strong bond is required coupled with small gap filling properties. Use where vibration occurs on uneven surfaces, metals, plastics, ferrite magnets, rubber & ceramics. For best performance bond surfaces should be clean & free from dust, the use of cleaning wipes is recommended.


...

KIT OVERVIEW Cad-zn is a highly protective zinc based metal finish deposited onto iron, steel, brass or copper. Not only does it provide an excellent barrier between the underlying metal & atmospheric attack, but also will act in a sacrificial manner where the zinc will corrode instead of the base metal due to galvanic action. This makes it the metal of choice to deposit onto ferrous items where rust prevention & protection is required. The finish produced by this kit is similar to that produced by cadmium plating, which is now not available due to the health hazards connected to the cadmium plating process. The kit utilises modern electronics to ensure correct current flow in the plating tank which is vital for correct deposit of the plating metal. The system

Includes:: a variable low voltage power supply for safety, & to avoid the many issues involved in using a battery, or alternative power source. KIT CONTENTS Plating tank, 1 cad-zn solution
- double strength makes 10 Litres, 1 set cad-zn anodes (2), tank support rod set, support clip set, crocodile lead set, power supply, control unit, 1 post plate dip tank, 1 post plate dip solution 5l, scourer powder, mask, gloves, eye protection glasses, cleaning cloth & instructions.


...