The last portion of Ron's DVD ' Beading Machine Basics ' features the construction of a Bomber Seat. These are the plans for the seat. Here's what's on the drawing
- a full-size tracing of one half of the seat back (which can be mirrored to make the complete back), which has the beads properly positioned, the hole locations & sizes marked, a pattern for the hole layout in the seat bottom, & a pattern for the bending fixture used for the seat back. The seat bottom is not part of the drawings, since this is made to fit the seat back, & everyone's seat will be slightly different due to the springback of the material you use. The ' Beading Machine Basics ' DVD shows the other construction details clearly, & this is a great project for any metalworker!
...

One round curved face & straight cross pein. Overall length: 323mm; handle length: 297mm. Weight: 430g. Head manufactured from 1055 medium carbon steel. Head

Width: 141mm; face diameter: 40mm. High quality genuine Hickory shaft.

...

Pre-accelerated, thixotropic viscosity polyester resin with low styrene emission.  Its rapid wet-out, low exotherm & fast hardening characteristics make it ideal for spray applications which require a fast mould turn round.  This reduction in styrene emission is achieved with no loss of intermalinar adhesion. Approved by Det-Norske Veritas & Lloyd's Register of Shipping for use in construction of craft under their survey. Crystic 2-446pa should be allowed to attain workshop temperatures (18°c
- 20°c) before use.  They need only the addition of a catalyst to start the curing reaction.  A colour change mechanism is incorporated into Crystic 2-446pa to indicate the presence of catalyst. After catalyst addition the resin will change from a blue-ish white to white before gelation.  Catalyst should be added at 1% or 2% into the resin. Parts of Catalyst M (or Butanox M 50) to 100 parts of Crystic 2-446PA 1.0 2.0 Pot Life in Minutes at 15°C 62 41 Pot Life in Minutes at 20°C 39 29 Pot Life in Minutes at 25°C 25 20
...

Our range of Cross Pein Hammers mounted on hickory shafts are of the highest quality. They suit just about any application. Remember
-
...

Dimensions: 60 x 40 x 125mm. (h x w x d). Weight: 1200g. General purpose dolly used for areas where the panel is curved & a flat surfaced dolly cannot be used. Heat treated under controlled conditions. Sandblasted finish & fully polished working face. ...

One round curved face & round point pick. Overall length: 325mm; handle length: 299mm. Weight: 410g. Head manufactured from 1055 medium carbon steel. Head

Width: 138mm; face diameter: 40mm. High quality genuine Hickory shaft.

...

One round curved face & curved cross pein. Overall length: 325mm; handle length: 300mm. Weight: 430g. Head manufactured from 1055 medium carbon steel. Head

Width: 140mm; face diameter: 40mm. High quality genuine Hickory shaft.

...

A simple but highly effective shaping aid. Ideal for replication of a given radius, crown or complex forms.

Material:

...

Custom Metal Polishing Book is a detailed guide to all the ins & outs of metal polishing. It covers wheels, compounds, equipment, preparation & tips on polishing brass, steel, aluminium, cast iron & stainless steel. 71 photos explain tools & techniques clearly. Table of Contents Definitions & terms Metal preparation Equipment Buffing wheels & compounds Basic buffing: aluminium & other soft metals Basic buffing: stainless steel & other hard metals Abrasive set up polishing wheels Detailed polishing & buffing Polishing & buffing prior to plating More quick tips & tech examples. ...

The Eastwood Cut-N-Weld Welding Top & Plasma Cutting Tops Patent Pending  are available separately & designed to fit the Eastwood 750 lb. Work Stand (43120) & others with up to a 1.25” tube diameter. Eastwood Cut-N-Weld Work Stand Tops Feature: Constructed of 14 Gauge Steel Warp-Resistant Welding Top Steel Framed Cutting Top Replaceable Cutting Slats Attaches to your Eastwood 750lb. Work Stand Portable & Easy to Store ...