This silicon carbide & lithium grease grinding compound comes in four grades for cylinder honing, score mark removal & cylinder head lapping in: extra fine, fine, medium, coarse & extra coarse. ...

High performance Water Based Lapping Paste Available in: 80 (Coarse), 120 (Medium), 220 (Fine). 2.5kg tamper evident tubs. Also available 80 (Coarse) & 120 (Medium) Grit in 5kg. A range of high performance, water based Lapping Pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear & type of equipment the correct grade is available from fine to coarse. An extremely stable easy to use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf clubs, municipal organisations, schools & sporting venues. * Oil Free * Low odour * Easily to use * Improves Cutting Performance * Cohesive gel provides faster sharpening * Suitable for most types of equipment * Low fling formula, which penetrates to the sharpening surfaces * Non drying, rewettable formula, rinses with water even after standing * Resists slumping * Prevents corrosion on newly sharpened blades Application & Storage Adjust cutting edges to be level & within 1mm of each other & coat blades with compound using swab or brush. This can be done whilst the blade are running in reverse lapping gear but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon type of equipment & degree of sharpening needed. Run machine without cutting grass for up to 1 minute & re-apply if necessary. Readjust blades accordingly. Store between 0-35 degrees C. Store in tightly closed containers. Protect from frost. ...

High performance Water Based Lapping Paste Available in:  80 (Coarse),   120 (Medium),  220 (Fine)  . 5kg tamper evident tubs. Also available 80 (Coarse), 120 (Medium) & 220 (Fine) Grit in 2.5kg. A range of high performance, water based Lapping Pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear & type of equipment the correct grade is available from fine to coarse. An extremely stable easy to use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf clubs, municipal organisations, schools & sporting venues. * Oil Free * Low odour * Easily to use * Improves Cutting Performance * Cohesive gel provides faster sharpening * Suitable for most types of equipment * Low fling formula, which penetrates to the sharpening surfaces * Non drying, rewettable formula, rinses with water even after standing * Resists slumping * Prevents corrosion on newly sharpened blades Application & Storage Adjust cutting edges to be level & within 1mm of each other & coat blades with compound using swab or brush. This can be done whilst the blade are running in reverse lapping gear but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon type of equipment & degree of sharpening needed. Run machine without cutting grass for up to 1 minute & re-apply if necessary. Readjust blades accordingly. Store between 0-35 degrees C. Store in tightly closed containers. Protect from frost. ...

Valve lapping paste in a double-ended tin with fine grade at one end & coarse at the other. ...

This silicon carbide & lithium grease grinding compound comes in four grades for cylinder honing, score mark removal & cylinder head lapping in: extra fine, fine, medium, coarse & extra coarse. ...

This silicon carbide & lithium grease grinding compound comes in four grades for cylinder honing, score mark removal & cylinder head lapping in: extra fine, fine, medium, coarse & extra coarse. ...

High performance Water Based Lapping Paste Available in: 80 (Coarse), 120 (Medium), 220 (Fine). 2.5kg tamper evident tubs. Also available 80 (Coarse) & 120 (Medium) Grit in 5kg. A range of high performance, water based Lapping Pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear & type of equipment the correct grade is available from fine to coarse. An extremely stable easy to use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf clubs, municipal organisations, schools & sporting venues. * Oil Free * Low odour * Easily to use * Improves Cutting Performance * Cohesive gel provides faster sharpening * Suitable for most types of equipment * Low fling formula, which penetrates to the sharpening surfaces * Non drying, rewettable formula, rinses with water even after standing * Resists slumping * Prevents corrosion on newly sharpened blades Application & Storage Adjust cutting edges to be level & within 1mm of each other & coat blades with compound using swab or brush. This can be done whilst the blade are running in reverse lapping gear but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon type of equipment & degree of sharpening needed. Run machine without cutting grass for up to 1 minute & re-apply if necessary. Readjust blades accordingly. Store between 0-35 degrees C. Store in tightly closed containers. Protect from frost. ...

High performance Water Based Lapping Paste Available in:   80 (Coarse),   120 (Medium),  220 (Fine) . 5kg tamper evident tubs. Also available 80 (Coarse), 120 (Medium) & 220 (Fine) Grit in 2.5kg. A range of high performance, water based Lapping Pastes, incorporating a unique gel system that enhances the sharpening characteristics of silicon carbide grit. Depending on the degree of wear & type of equipment the correct grade is available from fine to coarse. An extremely stable easy to use paste having low environmental impact which does not require cleaning after use. Developed for the maintenance departments of golf clubs, municipal organisations, schools & sporting venues. * Oil Free * Low odour * Easily to use * Improves Cutting Performance * Cohesive gel provides faster sharpening * Suitable for most types of equipment * Low fling formula, which penetrates to the sharpening surfaces * Non drying, rewettable formula, rinses with water even after standing * Resists slumping * Prevents corrosion on newly sharpened blades Application & Storage Adjust cutting edges to be level & within 1mm of each other & coat blades with compound using swab or brush. This can be done whilst the blade are running in reverse lapping gear but obvious safety precautions should be taken. The selection of coarse, medium or fine will depend upon type of equipment & degree of sharpening needed. Run machine without cutting grass for up to 1 minute & re-apply if necessary. Readjust blades accordingly. Store between 0-35 degrees C. Store in tightly closed containers. Protect from frost. ...

Chemico Grinding Paste (2.5kg) is a silicon carbide & lithium grease grinding compound available in 3 grades :
- Fine (220 grit)
-

...

Chemico Joining Cement (125ml) Chemico Jointing Cement is a Liquid Compound that can be applied to any joint either with or without a gasket. It will effectively seal bolted, flanged or screwed joints & as a liquid it is economical to use & will not squeeze into the interior of a joint & cause damage. It is non-abrasive & will not damage highly machined joint faces. The adhesive factor not only assists gasket location but has been shown to be an effective locking sealant for imparting additional security to splines, studs & pressfit bearings. It is waterproof & unaffected by sea water. It is anti-corrosive & inert. It is used to protect electrical join boxed & moisture sensitive instruments from the effects of a damp atmosphere. Used as a coating between two dissimilar metals such as steel & brass in contact, it will help prevent electrolytic action from sea water. Temperature Range: -40 degrees C
- +350 degrees C Method of Application: Apply a coat of Chemico Jointing Cement to each joint face & allow it to remain a few moments until the jointing becomes tacky. Close the joint. For screwed joint, apply one coat to each mating thread & screw up immediately. All joints must be clean & dry & free from any cleaning agents. Multiple applications, for example to a warped cylinder head, can often avoid the need for re-machining. For joints containing washers/gaskets of cork or absorbent material, apply one coat to each side of the washer or gasket & allow this to soak in. Apply a second coat to the joint faces, allow it to become tacky & then close the joint.  
...