This handy Auto Lens Repair Kit is specifically designed for the average vehicle owner to easily perform a professional repair on most types of auto lenses. It will fix a typical broken taillight lens in place, without removing the housing. The repair panel has a pre-formed grid pattern that closely matches the color & reflective qualities of the lens. The panels mounts quickly & easily on flat or curved surfaces with a special adhesive gasket forming a weather proof seal. Repairs: Tail Lights Turn Signals Markers Clear Lenses Instructions for quick lens repair: 1. Remove all loose & broken pieces around damaged area. Clean lens around area thoroughly with dry cloth or paper towel. 2. Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines. 3. Peel backing from panel & center over area to be repaired. Press the panel to the lens & run your fingers around the edges to insure a good bond. Kit
Includes:: 3 panels, same size 7 3/4" X 3 3/4" (1 Amber panel, 1 Red panel, 1 Clear panel) Replacing the lens is an expensive option so why not repair the damage at a fraction of the cost.