More From Contributor

£8.25
One Up Components Shark 50 Tooth sprocket & cage is set is designed to give the widest ratio possible on a 1 x 11 drivetrain. The 50 tooth Sprocket increases the range of a shimano 11 speed cassette by 19 percent giving the drivetrain a range of 500 percent. This also enables the rider to increase the size of the front chain ring from 30 to 34 tooth. The Kit

Includes::
an 18-tooth sprocket to improve shifting & cadence. The kit is compatible with Shimano drive trains & freehub bodies only. Kit

Includes::
50 & 18 tooth sprockets plus extended derailleur cage.



...
Available
£16.50
Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets & to make the process of changing your chainring much faster & simpler. Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees & pull it over & off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes! Cheaper Replacement Cost
- Replacement rings are a fraction of the cost of a complete direct mount chainring. Quick Change
- Replace your ring in less than a minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding. Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain. Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire.

...
Available
£5.00
One Up components Switch Carrier body for Race Face Cinch Super boost crank-sets. Switch Carrier body for Race Face Cinch super-boost direct mount chain sets. Designed to reduce the cost of replacing direct mount chain rings & increasing compatibility with new drivetrain offsets. The switch chain ring uses a 4 mm Allen key for quick chain ring switching enabling the rider to tailor the gear ratios to different terrain. To change the chain ring loosen the bolts & rotate the ring by 20 degrees then remove from crankarm. Repeat these steps in reverse to install the new chain ring. Compatible with 28, 30, 32, 34 & 36 tooth switch chainrings. ...
Available
£40.49
The XT 96BCD Narrow Wide Oval Single Chainring from One Up Components is a narrow wide chainring designed for ultimate traction by smoothing out the torque you deliver to your rear tire. Made from hard wearing 7075-T6 aluminium plate, the narrow wide tooth profile eliminates chain drop with the perfect chain mesh fit & the aggressive crud chamfers for awesome mud shedding performance & extended ring life. The chainring uses 12 percent ovality (the 32t model equals 30-34t range) & the 115 degree clocking from crank arm puts the major axis in your power stroke. The Reinforced Wide tooth design also provides maximum ring durability when run without a bash. Available in 30T, 32T or 34T, Black only. ...
Available
£39.49
The XT 96BCD Narrow Wide Oval Single Chainring from One Up Components is a narrow wide chainring designed for ultimate traction by smoothing out the torque you deliver to your rear tire. Made from hard wearing 7075-T6 aluminium plate, the narrow wide tooth profile eliminates chain drop with the perfect chain mesh fit & the aggressive crud chamfers for awesome mud shedding performance & extended ring life. The chainring uses 12 percent ovality (the 32t model equals 30-34t range) & the 115 degree clocking from crank arm puts the major axis in your power stroke. The Reinforced Wide tooth design also provides maximum ring durability when run without a bash. Available in 30T, 32T or 34T, Black only. ...
Available
£35.99
The XT 96BCD Narrow Wide Single Chainring from One Up Components is designed to eliminate chain drops with the perfect chain mesh fit. Made from 6mm hard wearing 7075-T6 aluminium plate, it features aggressive crud chamfers for awesome mud shedding performance & extended ring life. The reinforced wide tooth design provides maximum ring durability when run without a bash & the perfect 49mm chainline (corrected from stock 50.4mm) allows for a quieter drivetrain with enhanced chain wear & best drop performance. Available in 30, 32 or 34T in Black only. ...
Available
£35.99
The XT 96BCD Narrow Wide Single Chainring from One Up Components is designed to eliminate chain drops with the perfect chain mesh fit. Made from 6mm hard wearing 7075-T6 aluminium plate, it features aggressive crud chamfers for awesome mud shedding performance & extended ring life. The reinforced wide tooth design provides maximum ring durability when run without a bash & the perfect 49mm chainline (corrected from stock 50.4mm) allows for a quieter drivetrain with enhanced chain wear & best drop performance. Available in 30, 32 or 34T in Black only. ...
Available
£35.99
The XT 96BCD Narrow Wide Single Chainring from One Up Components is designed to eliminate chain drops with the perfect chain mesh fit. Made from 6mm hard wearing 7075-T6 aluminium plate, it features aggressive crud chamfers for awesome mud shedding performance & extended ring life. The reinforced wide tooth design provides maximum ring durability when run without a bash & the perfect 49mm chainline (corrected from stock 50.4mm) allows for a quieter drivetrain with enhanced chain wear & best drop performance. Available in 30, 32 or 34T in Black only. ...
Available
£42.69
The XTR 96BCD Narrow Wide Oval Single Chainring is designed to provide a more constant torque to the rear wheel thereby reducing spinouts & stalls on tough climbs. The 12 percent ovality equals a 30-34T range for the 32T model & the 115 percent clocking from the crank puts the major axis in your power stroke. The Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit & the perfect 49mm chainline corrects from the stock 50.4mm. This gives a quieter drivetrain with enhanced chain wear & best drop performance. The chainring features aggressive crud chamfers for mud shedding performance & extended ring life. Available in 30T, 32T or 34T, Grey only. ...
Available
£46.49
The XTR 96BCD Narrow Wide Oval Single Chainring is designed to provide a more constant torque to the rear wheel thereby reducing spinouts & stalls on tough climbs. The 12 percent ovality equals a 30-34T range for the 32T model & the 115 percent clocking from the crank puts the major axis in your power stroke. The Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit & the perfect 49mm chainline corrects from the stock 50.4mm. This gives a quieter drivetrain with enhanced chain wear & best drop performance. The chainring features aggressive crud chamfers for mud shedding performance & extended ring life. Available in 30T, 32T or 34T, Grey only. ...
Available

OneUp Components XT 96BCD Narrow Wide Oval Single Chainring Black - 34
Tooth

The XT 96BCD Narrow Wide Oval Single Chainring from One Up Components is a narrow wide chainring designed for ultimate traction by smoothing out the torque you deliver to your rear tire. Made from hard wearing 7075-T6 aluminium plate, the narrow wide tooth profile eliminates chain drop with the perfect chain mesh fit and the aggressive crud chamfers for awesome mud shedding performance and extended ring life. The chainring uses 12 percent ovality (the 32t model equals 30-34t range) and the 115 degree clocking from crank arm puts the major axis in your power stroke. The Reinforced Wide tooth design also provides maximum ring durability when run without a bash. Available in 30T, 32T or 34T, Black only.
  • Availability: In Stock
  • Supplier: Evans Cycles
  • SKU: EV273087-34-BLK
Availability: In Stock
£39.55

Product Description

The XT 96BCD Narrow Wide Oval Single Chainring from One Up Components is a narrow wide chainring designed for ultimate traction by smoothing out the torque you deliver to your rear tire. Made from hard wearing 7075-T6 aluminium plate, the narrow wide tooth profile eliminates chain drop with the perfect chain mesh fit & the aggressive crud chamfers for awesome mud shedding performance & extended ring life. The chainring uses 12 percent ovality (the 32t model equals 30-34t range) & the 115 degree clocking from crank arm puts the major axis in your power stroke. The Reinforced Wide tooth design also provides maximum ring durability when run without a bash. Available in 30T, 32T or 34T, Black only.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
deliver - The method by which something is delivered fomr one location to another
Mud - A combination of water and soil/clay/silt. Oftern brown in colour
Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.
Components - Multiple items used to complete the product.
Reinforced - Relating to structure, making it more sturdy.
Wide - Something with a large width.
Degree - An angle measurement, also can be the measurement of an extent that something happens, can also relate to an university academic measurement.
degree - The extremity of something or the angle. Can also relate to a university achievement.
Design - A drawing or styles that shows the look and functionality of something before its made.
Mesh - A material mad up of crossed over fibres such as metal or thread.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

Supplier Information

Evans Cycles
Evans Cycles is an established and well known cycle store with a 90 year history in the sector. Since the nineties, Evans Cycles has also been trading via mail order and online, and the store has undergone a recent expansion involving the creation of a large, modern distribution centre and further store openings extending throughout the UK. Evans Cycles also introduced the Ride2Work scheme offering employees savings of up to 42% and organises Ride It!, a series of road and off-road non-competitive rides that everyone is welcome to participate in. Evans Cycles stocks a wide range of bikes, including leading brands such as Norco, Cannondale, Jamis, Fuji, Raleigh and Trek alongside Evans Cycles' own brand, Pinnacle Bikes. The bikes include road bikes, mountain bikes, hybrids, BMX bikes, electric bikes, folding bikes and more. Evans Cycles also stocks clothing, accessories, components, bags, helmets and protective gear, tools and maps and books.
Page Updated: 2020-07-31 21:44:18

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu