The One Up Bash Guide was developed with input from EWS World Champions, Richie Rude & Jared Graves. Reinforced Nylon bash guards & a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the One Up Bash Guide can handle the biggest hits, but at a weight of only 102g (34T) you may forget it’s even there. ...

The Low Direct Mount Chain Guide from One Up is designed to eliminate dropped chains forever & double the life of your chainring at the same time. The guide weighs a mere 20g & doubles chainring life by limiting the chain side to side movement on narrow wide chainrings, meaning that there is less wear on the teeth. ...

The RADr (Radial Appositioned Derailleur) Shimano Shadow ' Plus' Rear Cage from One Up Components is the 2nd generation of Rad Cage. It has been specifically designed for the Saint & Zee, but works with all Shimano Shadow Plus Clutch rear derailleurs. The RADr is the lowest profile 42T compatible cage & dramatically improves the shifting performance on any extended range Shimano 1X10 drivetrain. ...

The RADr (Radial Appositioned Derailleur) Shimano Shadow ' Plus' Rear Cage from One Up Components is the 2nd generation of Rad Cage. It has been specifically designed for the Saint & Zee, but works with all Shimano Shadow Plus Clutch rear derailleurs. The RADr is the lowest profile 42T compatible cage & dramatically improves the shifting performance on any extended range Shimano 1X10 drivetrain. ...

The Shimano 1x 10 Expander Sprocket Kit from One Up Components is an incredibly easy-to-fit pair of sprockets that replace two of the stock cogs to give you 90 percent of the benefit of a 1X11 system but at 10 percent of the cost. The larger cog fits behind most 11-36T cassettes, displacing one from the main cluster. The 16T sprocket provides even more cassette progression for smoother cadence & enhanced shifting. These cogs feature 12 upshift optimized points & uses the original 28/32/36T steel sprockets for maximum durability. Available in Black or Green. ...

The Shimano 1x 11 XT/XTR Expander Sprocket Kit from One Up Components consists of 2 replacements cog, one 18T & one 45T. This increases the stock shimano 11-40T cassette range by 12.5 percent & means that you can increase your front chainring from 30T to 34T without losing any low range. The kit tunes the cassette into 2 distinct zones, climbing (21-45T) & descending (11-18T). The 18T cog provides more even cassette progression for smoother cadence & both cogs have 10 upshift points. Available in Black only. ...

The SRAM 1x 11 X Cog Expander Sprocket from One Up Components is designed to not only extend the life but also the range of your XX1 or X01 cassette with the X-Cog 44T expander sprocket. The Cog simply replaces the 42t aluminium cog & has 8 optimized upshift points, a press fit with no loose spacers & full spline width to prevent gouging damage to freehub. Available in Black or Green, 44T only. ...

The SRAM 1x 11 X Cog Expander Sprocket from One Up Components is designed to not only extend the life but also the range of your XX1 or X01 cassette with the X-Cog 44T expander sprocket. The Cog simply replaces the 42t aluminium cog & has 8 optimized upshift points, a press fit with no loose spacers & full spline width to prevent gouging damage to freehub. Available in Black or Green, 44T only. ...

One Up Components Shark 50 Tooth sprocket & cage is set is designed to give the widest ratio possible on a 1 x 11 drivetrain. The 50 tooth Sprocket increases the range of a shimano 11 speed cassette by 19 percent giving the drivetrain a range of 500 percent. This also enables the rider to increase the size of the front chain ring from 30 to 34 tooth. The Kit

Includes:: an 18-tooth sprocket to improve shifting & cadence. The kit is compatible with Shimano drive trains & freehub bodies only. Kit

Includes:: 50 & 18 tooth sprockets plus extended derailleur cage.



...

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets & to make the process of changing your chainring much faster & simpler. Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees & pull it over & off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes! Cheaper Replacement Cost
- Replacement rings are a fraction of the cost of a complete direct mount chainring. Quick Change
- Replace your ring in less than a minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding. Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain. Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire.

...