The Giro Ledge Mips helmet is a top seller each season. Its hard-shell construction makes it tough & durable, perfect for freestyle, & Mips provides added protection. Giro’s fit system enables up to 6cm of size adjustment & the ear pads can be removed for warmer days or wearing a beanie underneath. Construction Hard-shell construction uses a tough & durable ABS outer attached to an impact-absorbing EPS foam liner. Ventilation Super Cool passive vents are non-adjustable but allow plenty of airflow to prevent you from getting too hot. There are two vents at the front, 4 on top, & 2 at the back. Stack Ventilation under the brim draws hot air away from the top of goggles to help keep your vision clear. Fit Giro's In Form 2 fit system means that you can fine-tune the size by twisting the dial at the back (provides up to 6cm of adjustment). On-the-Fly vertical tuning enables the helmet to be tilted forward or backward to accommodate different goggles & avoid gaps. Additional Safet... ...

The Nine MIPS is the obvious choice for anyone wanting safety, comfort, personalisation & outstanding value. In-mould

...

The Nine MIPS is the obvious choice for anyone wanting safety, comfort, personalisation & outstanding value. In-mould

...

Giro's park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it's up to the

...

Giro's park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it's up to the

...

Giro’s park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it’s up to the task of dealing with the abuse of rails, streets & parks. The In Form Fit System provides a comfortable & precise fit at the twist of a dial, ample venting keeps your head cool & most importantly, MIPS provides added protection. All for under £100. Size guide: Small Medium 52-55.5cm 55.5-59cm Venting: Passive Sizing system: Adjustable Weight: 495g Construction: Hard Shell Safety standard: e N 1077 Class BAdditional safety MIPS can provide more protection in certain impacts. The main components of a MIPS equipped helmet are 1. The Interior Foam Liner, 2. the Low Friction Liner & 3. an elastomeric attachment system. In an angled impact, the elastomeric attachment system stretches to allow the foam liner to rotate independently around your head. Venting Stack Venting was developed based on research showing the majority of the warm air that can cause fogging exhausts from the centre top vent of the goggle. Aligning the Stack Vent in the helmet with the vent of your goggles helps to keep them clear & fog-free. The Super Cool passive vents are non-adjustable but allow air to flow easily, perfect for spring skiing or whilst sessioning the park. Sizing system The In Form Fit System makes it easy to dial in a custom fit in seconds—even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment & enhanced stability. The Vertical Tuning feature accommodates different goggles & head shapes for a custom fit free of gaper gap. Construction Hard Shell Construction produces great helmets at a great value. A rugged outer shell is moulded & then attached to the e PS foam liner. Other features Goggle retainers & ear pads can both be removed.ear pads are compatible with Outdoor Tech aftermarket headphones. ...

Giro's park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it's up to the

...

Giro's park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it's up to the

...

Giro's park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it's up to the

...

Giro’s park helmet, the Ledge MIPS, features a clean, minimalist design. Built with hard shell construction it’s up to the task of dealing with the abuse of rails, streets & parks. The In Form Fit System provides a comfortable & precise fit at the twist of a dial, ample venting keeps your head cool & most importantly, MIPS provides added protection. All for under £100. Size guide: Small Medium 52-55.5cm 55.5-59cm Venting: Passive Sizing system: Adjustable Weight: 495g Construction: Hard Shell Safety standard: e N 1077 Class BAdditional safety MIPS can provide more protection in certain impacts. The main components of a MIPS equipped helmet are 1. The Interior Foam Liner, 2. the Low Friction Liner & 3. an elastomeric attachment system. In an angled impact, the elastomeric attachment system stretches to allow the foam liner to rotate independently around your head. Venting Stack Venting was developed based on research showing the majority of the warm air that can cause fogging exhausts from the centre top vent of the goggle. Aligning the Stack Vent in the helmet with the vent of your goggles helps to keep them clear & fog-free. The Super Cool passive vents are non-adjustable but allow air to flow easily, perfect for spring skiing or whilst sessioning the park. Sizing system The In Form Fit System makes it easy to dial in a custom fit in seconds—even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment & enhanced stability. The Vertical Tuning feature accommodates different goggles & head shapes for a custom fit free of gaper gap. Construction Hard Shell Construction produces great helmets at a great value. A rugged outer shell is moulded & then attached to the e PS foam liner. Other features Goggle retainers & ear pads can both be removed.ear pads are compatible with Outdoor Tech aftermarket headphones. ...