The Lashed has been 32’s best selling boot year after year. It is incredibly lightweight & features an articulating cuff, this meaning the boot doesn’t blow out around the ankle when you flex forwards. The benefit of this is a consistent & supportive fit in all terrains.

Specification Comfort Fit Level 1 Liner • 100% Heat Moldable Intuition Liners • Single Density Intuition for comfort, warmth & support • Internal anatomical foam overlays in heel for heel hold • Integrated lacing system • Sherpa Lined Cuff Level 1 Footbed • EVA for cushioning • Sherpa Top Sheet for warmth & comfort Flex: Medium Features Fast Track Lacing is a friction reducing system that allows the upper & lower sections to be controlled independently for a customised fit. 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. The skate inspired Rubber Sole looks amazing & provides loads of grip. The women’s 86 FT is a low cost boot from a proper snowboard boot specialist. With a fairly soft (medium rated) flex they are popular with lighter riders, those just starting out & freestyle or all-mountain snowboarders that want an easy flexing, good-looking boot. Is it for me? If you’re on a budget or after an easy flexing boot then it doesn’t come any better looking than this.

...

The women’s Binary BOA is all about ease of use & providing a high level of support. With dual BOA closures you can really dial in your fit & the stiffer flex makes it a responsive, longer lasting boot.

Specification Shell Dual BOA Closure Performance Backstay Articulating Cuff 3D Molded Tongue High Density Evolution Foam Outsole Flex: Medium/ Stiff Features The  Dual BOA Closure allows you to fine tune your fit & flex with focused lock-down in the ankle area to secure your heel.   A backstay runs from your heel up the back of your boot. The  Performance Backstay offers a solid flex & provides durability. An  Articulated Cuff eliminates shell distortion when the boot is flexed & increases heel hold. The 3D Molded Tongue improves comfort, fit & flex. High Density Evolution Foam Outsole is lightweight & absorbs big impacts. Level 2 Liner • 100% Heat Moldable Intuition Liners • Dual Density Intuition Soft Touch foam for comfort, warmth & support • Internal anatomical foam overlays in heel for optimal heel hold • External overlays for support & response • Integrated Velcro Closure reduces bulk & pressure points Level 2 Footbed • Moulded Ortholite provides spring-back technology, retaining 95% of its thickness over time • Lightweight providing optimum performance • Foam contains recycled rubber powder to TR32D LIGHTLY • Mesh topsheet for comfort If you are looking for a supportive boot that doesn’t drain all of your energy just doing them up, then this is it. The BOA Closures allow you to tighten the boot precisely & are incredibly easy to fasten & release. Being at the stiffer end of the scale in terms of flex so they are best suited to strong riders or those that want a boot that won’t fold in half – in other words one that is supportive all day long. A great choice for seasonaires. Is it for me? Best suited intermediate to advanced snowboarders that ride from first to last lift. A great choice for seasonaires.

...

The Focus BOA is all about focused fit & support. With dual BOA closures you can really dial in your fit & the stiff flex & durable outsole makes it the go to Thirty Two boot for riders looking to ride fast & get off-piste whenever possible.

Specification Shell Dual BOA Closure BOA External Heel Support Performance Backstay Articulating Cuff 3D Molded Tongue High Density Evolution Foam Outsole with Stabilizer Level 3 Liner Level 3 Footbed Flex: Stiff Features The Dual BOA Closure means that you can fine tune your fit & flex with focused lock-down in the ankle area to secure your heel. BOA External Heel Support wraps around the back of the boot increasing response & support. A backstay runs from your heel up the back of your boot. The Performance Backstay offers a solid flex & provides durability. An Articulated Cuff eliminates shell distortion when the boot is flexed & increases heel hold. The 3D Molded Tongue improves comfort, fit & flex. High Density Evolution Foam Outsole with Stabilizer is lightweight, durable & has rubber sections on the perimeter of the sole for stability. Level 3 Liner 100% Heat Moldable Intuition Foam allows the liner to be heat molded in store for a custom fit Dual Density Intuition Foam for comfort, warmth & support Internal Anatomical Foam Overlays are strategically positioned to provide the optimal heel hold Integrated Pockets for Heel Hold Kit
- additional foam pads that can be easily added & changed for a customized fit Neoprene Toe Cap reduces toe pressure Dual Power Wrap with Velcro Cuff Closure for secure & precise liner fastening Level 3 Footbed Custom Molded Evolution Foam is ultra light weight & comfortable Molded TPU Heel Cradle & Arch Support keeps your foot in the right position & supported Dual Density Evolution Foam Heel Pod for maximum impact protection If you are a powerful rider these boots will reward you with lightening quick response & daylong support. They probably shouldn’t be your first pair of boots if you’re just getting into the spot but more experienced snowboarders will know if they’re the kind of person looking for a stiff/supportive boot. If you are then the Focus BOA offers tons of tech, customisable fit features & durability. Is it for me? Best suited intermediate to advanced snowboarders that ride fast & aggressively. Thirty Two have increased the soles durability so It’s a great option if, like Jeremy Jones, you hike for your turns.


...

This boot should become the benchmark for what we consider a light boot to be. Thirty Two have taken light to a new level without compromising on features such as the articulating cuff, 3D moulded toungue & 100% heat Mouldable Intuition liners. Specification: Comfort Fit – Medium to soft flex Level 1 Liner 100% Heat Moldable Intuition Liners Single Density Intuition Soft Touch foam for comfort, warmth & support Lacing system with Lace Lock for enhanced heel hold & fit Internal anatomical EVA overlays in heel for optimal heel hold Aegis anti-microbial coating to eliminate odor Level 1 Footbed Die cut flat sheet EVA Lightweight providing optimum performance Serpa topsheet for warmth & comfort Flex (1-soft, 10-stiff): 3 Features 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with STI Evolution Foam are 15-40% lighter than previous seasons, remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. The JP Walker Light is essentially a stripped down version of the Lashed. The changes to the liner & foot bed save weight making them incredibly light. With the soft flex they would suit freestyle riders or snowboarders with a lighter build. Is it for me? Ideal if you are looking for a soft boot for riding the park & out of the box comfort or are a beginner that isnt used to having your feet in snowboard boots, you will appreciate the forgiving feel of these boots. ...

The Lashed has been 32’s best selling boot year after year. The 1:1 Liner to Outsole fit is setting the new standard for snowboard boot fitting – with true half sizes, rather than a small liner being put in a larger shell. Comfort, support & style, the Lashed has it all. Specification: Team Fit – Medium flex suitable the majority of snowboarder worldwide Level 2 Liner 100% Heat Moldable Intuition Liners Dual Density Intuition Soft Touch foam for comfort, warmth & support Internal anatomical foam overlays in heel for optimal heel hold External overlays for support & response Integrated Velcro Closure reduces bulk & pressure points Level 2 Footbed Moulded Ortholite provides spring-back technology, retaining 95% of its thickness over time Lightweight providing optimum performance Foam contains recycled rubber powder to TR32D LIGHTLY Mesh topsheet for comfort Flex (1-soft, 10-stiff): 4 Features 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with STI Evolution Foam are 15-40% lighter than previous seasons, remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. Thirty Two built their name on boots like the Lashed; it’s somewhat of a classic & is everything we have come to expect from a 32 boot. There aren’t any gimmicks going here, just well designed, comfortable, light boots & the Bradshaw colour is a winner. I’m going to riding the Lashed this season. Is it for me? With a mid flex these suit all but the hard-chargers amongst us. It’s no coincidence that they are the biggest selling snowboard boot worldwide. You can’t really go wrong. ...

The Lashed has been 32’s best selling boot year after year. It is incredibly lightweight & features an articulating cuff, this meaning the boot doesn’t blow out around the ankle when you flex forwards. The benefit of this is a consistent & supportive fit in all terrains.

Specification Level 2 Liner • 100% Heat Moldable Intuition Liners • Dual Density Intuition Soft Touch foam for comfort, warmth & support • Internal anatomical foam overlays in heel for optimal heel hold • External overlays for support & response • Integrated pockets for heel hold kit (heel hold kit not included) • Neoprene toe cap to reduce toe pressure • Dual power wrap Velcro cuff closure • Sherpa Lined Cuff Level 2 Footbed • Moulded EVA for high impact cushioning • Lightweight providing optimum performance • Moulded TPU Heel Cradle for arch support Flex: Medium Features Laces  – The original lacing system is tried & tested, It is both lightweight & laces are easily replaced. 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots use High Density Evolution foam which is not only much lighter, but it also provides better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. Thirty Two built their name on boots like the Lashed, it’s somewhat of a classic & is everything we have come to expect from a 32 boot. Lightweight, comfortable & they look amazing. What’s not to like?! Is it for me? With a mid flex these suit all but the hard-chargers amongst us. It’s no coincidence that they are the biggest selling snowboard boot worldwide. You can’t really go wrong.

...

The Lashed has been 32’s best selling boot year after year, the Lashed FT has everything the Lashed has got but with the new & enhanced Fast Track Lacing System. Reduced friction, four zone Lacing, handle storage & a one Piece lock all add up to offer a great fit in a quick & easy package. Specification: Level 2 Liner 100% Heat Moldable Intuition Liners Dual Density Intuition Soft Touch foam for comfort, warmth & support Internal anatomical foam overlays in heel for optimal heel hold External overlays for support & response Integrated Velcro Closure reduces bulk & pressure points Level 2 Footbed Moulded Ortholite provides spring-back technology, retaining 95% of its thickness over time Lightweight providing optimum performance Foam contains recycled rubber powder to TR32D LIGHTLY Mesh topsheet for comfort Flex (1-soft, 10-stiff): 4 Features Fast Track Lacing System – Reduced friction & secure flip lock, the lacing has a four zone system making it easier to achieve a better fit. Thirt Two takes fit seriously. 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with STI Evolution Foam are 15-40% lighter than previous seasons, remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. Thirty Two built their name on boots like the Lashed, it’s somewhat of a classic & is everything we have come to expect from a 32 boot & now we have the Lashed FT (Fast Track). Some people are sceptical about quick lacing systems (when they’ve never had them) but I’d encourage you to try them. I rode them all of last season & you forget how long it takes to get regular laces as secure. With Fast Track you will be at the front of the lift line or have a few more minutes in bed while everyone else is crouched down tugging on their laces.  Is it for me? With a mid flex these suit all but the hard-chargers amongst us. It’s no coincidence that they are the biggest selling snowboard boot worldwide. You can’t really go wrong. ...

This boot should become the benchmark for what we consider a light boot to be. Thirty Two have taken light to a new level without compromising on features such as the articulating cuff, 3D moulded tongue & 100% heat Mouldable Intuition liners. Specification: Comfort Fit – The new standard in out-of-box fit. Medium to soft flex Level 1 Liner • 100% Heat Moldable Intuition Liners • Single Density Intuition Soft Touch foam for comfort, warmth & support • Integrated Lacing system with Lace Lock for enhanced heel hold & fit • Internal anatomical EVA overlays in heel for optimal heel hold • Aegis anti-microbial coating to eliminate odour Level 1 Footbed • EVA with Serpa topsheet for warmth & comfort • Lightweight providing optimum performance Flex: Medium/ Soft Features 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with High Density Evolution Foam remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit at no extra cost. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. Thirty Two boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. The Light is essentially a stripped down version of the Lashed. The changes to the liner & foot bed save weight & also bring the price down, which means you’ll have enough money for that new jacket & a lift pass. With the soft flex they suit freestyle riders or snowboarders with a lighter build. Is it for me? Ideal if you are looking for a soft boot for riding the park & out of the box comfort. Beginners that aren’t used to having their feet in snowboard boots will appreciate the forgiving feel of these boots. ...

With a flex rating towards the higher end of the scale (7/10) the TM-Two is a solid & supportive boot for those looking for some real performance. With some great fit features such as the Tongue Tension System it’s no wonder the TM-Two is the number one choice for the pro team (TM stands for ‘ Team Model’). Specification: Performance Fit – Medium to hard flex for best possible performance Level 3 Liner 100% Heat Moldable Intuition Liners Dual Density Intuition Soft Touch foam for comfort, warmth & support Internal anatomical foam overlays in heel for optimal heel hold External Power Wrap overlays for support & response Integrated Velcro Closure reduces bulk & pressure points Level 3 Footbed Moulded PU Footbed for ultimate comfort Dual density PU pod in the heel for impact protection Moulded TPU Heel cradle & arch support Mesh topsheet for comfort Flex (1-soft, 10-stiff): 7 Features We’ve all heard of using air bags in soles to provide cushioning, 32 uses System G2 Gel instead, which is less affected by temperature changes than airbags & will not bottom out or pop under impact. 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. The Tongue Tension System is a very cleaver yet simple bit of tech. It is basically a lace loop that is runs from the outside, through the shell, to the tongue so when you tighten your laces it automatically pulls the tongue down & around your foot centralising it & improving the fit. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with STI Evolution Foam are 15-40% lighter than previous seasons, remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. The TM-Two are a much loved favourite with the Thirty Two team riders & with us at Bliss Snowboards, our workshop manager Harry rides in them. He swears by the tongue tension system to help lock the foot down & prefers a boot that is towards the stiffer end of the scale. This season’s black & green colour way is the pro model for Scott Stevens, if you haven’t seen him ride you are missing out on some of the most creative snowboarding to date – check him out! Is it for me? With a mid-stiff flex these would suit someone with at least a couple of weeks rid ...

With a stiff/medium flex rating the TM-Two is a solid & supportive boot for those looking for some real performance. With some great fit features such as the Tongue Tension System it’s no wonder the TM-Two is the number one choice for the pro team (TM stands for ‘ Team Model’).

Specification Performance Fit – Medium to hard flex for the best possible performance Level 3 Liner • 100% Heat Moldable Intuition foam Liners for a custom fit • Dual Density Intuition Soft Touch Foam for comfort, warmth & support • Internal Anatomical Foam Overlays in heel for optimal heel hold • Integrated Pockets for Heel Hold Kit • Heel Hold Kit included • Neoprene Toe Cap to reduce toe pressure • Dual Power Wrap Velcro Cuff Closure for support & response Level 3 Footbed • Custom Moulded Evolution Foam for ultimate in lightweight comfort • Dual density Evolution Foam Heel Pod for maximum impact protection • Moulded TPU Heel Cradle & Arch Support Flex:  Stiff/ Medium Features We’ve all heard of using air bags in soles to provide cushioning, 32 uses  System G2 Gel instead, which is less affected by temperature changes than airbags & will not bottom out or pop under impact. 3-D Molded Tongue – Varies in stiffness depending on the boot giving a customised flex & wraps your foot for easier lacing & better heel hold. The  Tongue Tension System is a very cleaver yet simple bit of tech. It is basically a lace loop that is runs from the outside, through the shell, to the tongue so when you tighten your laces it automatically pulls the tongue down & around your foot centralising it & improving the fit. In order to drastically reduce the weight of their boots, Thirty Two use an alternative to having a traditional (heavy) rubber outsole. 32 boots with  High Density Evolution Foam are 15-40% lighter than previous seasons, remain the lightest in the industry & provide better cushioning than traditional foam material. 100% Heat Moldable Intuition Liners – Come down to our show room to buy your 32’s & get them heat moulded for a custom fit. Articulating Cuff boots have two distinct areas to the boot; the clog (lower section) & the cuff (top section) When you flex the boot, the join between these two areas can often pinch & distort. 32 boots with an articulating cuff eliminate this issue by allowing the top half of the boot to flex freely without distorting the lower section. Lots of companies only produce the outer shell of the boot in whole sizes & use different sized liners to create half sizes. This boot has 1:1 Liner to Outsole Fit so the Shell & liner are true whole & half sizes. The TM-Two are a much loved favourite with the Thirty Two team riders & with us at Bliss Snowboards, our workshop manager Harry rides in them. He swears by the tongue tension system to help lock the foot down & prefers a boot that is towards the stiffer end of the scale. Is it for me? With a mid-stiff flex these would suit someone with at least a couple of weeks riding under their belt right up to those who can throw down with the pros. More aggressive & heavier riders wil

...