“THE MOUNTAIN RULER” SCOTT’s mid-fat, lightweight, touring ski with a Paulownia wood core & Pro-Tip Rocker, the Surf’ Air combines surface area, stability & versatility. Features & Benefits Scott Pro Tip Rocker 350 Combining a progressive shape with increased tip height & radius creates Pro-Tip Rocker. SCOTTs Pro-Tip produces a more consistent ski flex & predictable turns. SCOTT skis, using Pro-Tip Rocker, simply track better than the competition & are available in three heights catering specifically to the skis’ intended use: 300mm (Precision On-Piste), 350mm (All-Mountain), 375 & 450mm (Freeride) SSCL P
- Sandwich Sidewall Construction Laminate Paulownia Lightness & Efficiency
- Paulownia wood core combined with laminates results in a super lightweight ski with a great flex & torsional rigidity. Less-is-more, results in exploring efficiency. Dual Radius Traditional skis have a fixed radius that determines the length of every turn. SCOTT skis combine two radii (dual radius) to create the sidecut or “shape” of the ski. By incorporating the Dual Radius concept, the ski can turn when you want it to turn, resulting in a more versatile ski which is not confined to one type of skiing or terrain. Factory Finish SCOTT skis come direct from the factory ready to ski with SCOTT factory finish. Every factory finished ski leaves the factory with side edges ground at 89° & base edges ground between 0.5° & 0.8° for exceptional performance. The base is finished with a micro structured CNC stone grind so you can mount your skis & hit the hill, no tuning required. Specifications Geometry: 128mm / 89mm / 115mm (For 178cm Length) Turning Radius: 15 Metres (For 178cm  Length) Camber: Tip Rocker Construction: Woodcore Bindings: Ski Only

...

Simply, the SCOTT Symbol is a great helmet. From the Freeride World Tour to backcountry spots across the globe, our athletes trust their heads with this helmet. Featuring the integrated MIPS® Brain Protection System, the Symbol delivers unmatched protection, while maintaining a low profile & modern look. Technologies MIPS® Brain Protection System If you are seeking the best protection that money can buy then look no further. Scott helmets with integrated MIPS® brain protection system offer a whole new dimension in safety. No matter where or how you ride, choose a SCOTT helmet & Elevate Your Safety! MIPS is a low friction layer inside the helmet which allows the head to rotate relative to the helmet in an angled impact. This substantially reduces rotational violence & the potential for damage to the brain. Scott Active S-Vent System The adjustable Active S-Vent System channels air over & around the skier’s head removing stagnant air from the helmet. The vacuum effect created when the S-vents are open, is even more easily adjustable thanks to a shell construction, allowing the rider to determine the right amount of airflow. Scott G-Vent System The G-Vent System is SCOTT ’s most advanced helmet venting system. Intake vents placed on the front of the helmet, just above the goggle, pull air through the goggle frame removing stagnant air that causes fogging. The result is a venting system that allows your goggle & helmet to breathe more efficiently. MRAS Fit System The Micro Rotary Adjustment System (MRAS) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The MRAS Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. PC In-Mold Construction During the in-mold manufacturing process, the outer shell of polycarbonate material is fused with the helmet’s impact absorbent foam liner, creating a super lightweight outer shell. With reduced weight & bulk surrounding the head, in-mold helmets are more comfortable than traditional helmets. Features MIPS® Brain Protection System G-vent System on front Active S-vent System M-R.A.S Fit System Construction PC in-mold with EPS liner MIPS® low friction layer PC bottom wrap ...

Simply, the SCOTT Symbol is a great helmet. From the Freeride World Tour to backcountry spots across the globe, our athletes trust their heads with this helmet. Featuring the integrated MIPS® Brain Protection System, the Symbol delivers unmatched protection, while maintaining a low profile & modern look. Technologies MIPS® Brain Protection System If you are seeking the best protection that money can buy then look no further. Scott helmets with integrated MIPS® brain protection system offer a whole new dimension in safety. No matter where or how you ride, choose a SCOTT helmet & Elevate Your Safety! MIPS is a low friction layer inside the helmet which allows the head to rotate relative to the helmet in an angled impact. This substantially reduces rotational violence & the potential for damage to the brain. Scott Active S-Vent System The adjustable Active S-Vent System channels air over & around the skier’s head removing stagnant air from the helmet. The vacuum effect created when the S-vents are open, is even more easily adjustable thanks to a shell construction, allowing the rider to determine the right amount of airflow. Scott G-Vent System The G-Vent System is SCOTT ’s most advanced helmet venting system. Intake vents placed on the front of the helmet, just above the goggle, pull air through the goggle frame removing stagnant air that causes fogging. The result is a venting system that allows your goggle & helmet to breathe more efficiently. MRAS Fit System The Micro Rotary Adjustment System (MRAS) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The MRAS Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. PC In-Mold Construction During the in-mold manufacturing process, the outer shell of polycarbonate material is fused with the helmet’s impact absorbent foam liner, creating a super lightweight outer shell. With reduced weight & bulk surrounding the head, in-mold helmets are more comfortable than traditional helmets. Features MIPS® Brain Protection System G-vent System on front Active S-vent System M-R.A.S Fit System Construction PC in-mold with EPS liner MIPS® low friction layer PC bottom wrap ...

“THE ALL IN ONE” The Ski has been specifically developed to handle all types of skiing & terrain conditions. The Ski features a unique elliptic sandwich construction offering exceptional torsional stiffness, as well as a true, full-length wood core for an unmatched homogenous flex. With 3 Dimension sidecut & a Pro-Tip rocker profile, The Ski provides unmatched performance & versatility in all conditions. Gold winner of the Fall Line Ski of the Year 2013
- 14. Features Pro-Tip Rocker Pro-Tip Rocker features a combination of progressive shape & increased tip height & radius. SCOTTs Pro-Tip produces a more consistent ski flex & predictable turns. 3 Dimension Sidecut 3 Dimension combines 2 radii with a central flat line under foot. The tip & tail radii allow for easy turn initiation while the flat line provides stability, power & precision. Designed in conjunction with our Freeski Team Athletes, 3 Dimension Sidecut provides a level of versatility, balance & power under foot that meets the demands of the world’s best skiers. 3 Dimension Sidecut is offered in sizes S, M & L, allowing skiers to choose the right amount sidecut for their intended use. Sandwich Sidewall Construction Laminate Elliptic SCOTT’s Elliptical Sandwich construction offers exceptional torsional stiffness while providing a consistent & confident flex, delivering precise edge control. Full Ski Length Wood Core The full-length, wood core produces a moreconsistent ski flex & creates a homogeneoustransition between middle part androckered tip & tail. Factory Finish SCOTT skis come direct from the factory ready to ski with SCOTT factory finish. Every factory finished ski leaves the factory with side edges ground at 89° & base edges ground between 0.5° & 0.8° for exceptional performance. The base is finished with a micro structured CNC stone grind so you can mount your skis & hit the hill, no tuning required. Pre Track When developing Pre-Track, SCOTT designed skis with wide tips and/or slightly turned up tails. With Pre-Track, SCOTT skis employ a smaller effective edge for short radius turns on groomed slopes & a longer effective edge when making bigger turns or skiing off-piste. The result is a more precise, stable, reliable & versatile ski. Specifications
...

Back by popular dem&, The Ski has been specifically developed to handle all types of skiing & terrain conditions. The Ski features a unique elliptic sandwich construction offering exceptional torsional stiffness as well as a true full length wood core for an unmatched homogenous flex. With 3 Dimension side cut & a Pro-Tip rocker profile The Ski provides unmatched performance & versatility in all conditions. For over a decade Scott has been at the forefront of ski development & innovation, continually providing skiers with unique technologies specifically developed to enhance their skiing experience.  For 2015 Scott is proud to deliver a complete freeski line, featuring innovative rocker shapes & the proven 3 Dimension sidecut design.  Scott is a company made from individuals who are more than just employees; they are users devoutly passionate about being in the mountains. Ski Features Pro Tip Rocker SCOTT’s Pro-Tip Rocker produces a more consistent ski flex & predictable turns, by using a progressive tip height radius. SCOTT skis that feature Pro-Tip Rocker simply track better than the competition & are available in four heights catering specifically to the skis intended use: Pro- Tip Rocker 300 / 320 / 350 / 375 & 450. 3 Dimension Sidecut This revolutionary sidecut design combines a tip & tail radius with either a central flat line or a small amount of sidecut under foot. The tip & tail radii allow for easy turn initiation while the flat line (freeski) or a larger radius (all conditions) provides stability, power & precise edge hold. This proven design has earned accolades in the form of X-Games gold’s & multiple ski test awards. Full Ski Length Wood Core The full-length, wood core produces a more consistent ski flex & creates a homogeneous transition between middle part & rockered tip & tail. Pre-Track SCOTT’s Pre-Track technology allows a variable effective edge depending on terrain. The unique shovel & tail geometry offers a smaller effective edge for short radius turns on groomed slopes & a longer effective edge when making bigger turns or skiing off-piste. The result is a more precise, stable & versatile ski. Factory Finish SCOTT skis come direct from the factory ready to ski with Scott’s factory finish. Factory finish offers an effective edge angle of 88°, resulting from a 3° side & 1° base angle for an exceptional performance. The base is finished with a micro structured CNC stone grind so you can mount your skis & hit the hill, no tuning required. Ski

Specification Waist: 91mm for 175cm length Turn Radius: 16m/20m/13m for 175cm length Terrain:  All Mountain Construction: Sandwich sidewall construction titanal elliptic Camber/ Rocker: Pro-Tip rocker 320 Technology: Pro-Tip Rocker 320, 3 Dimension Side cut, Full Ski Length Wood Core, Pre-Track, Factory Finish Bindings: No Bindings included
- see recommendations below Ski Profile Snow Conditions: All Conditions Ski Terrain: All Mountain Skier Level: Intermediate to Advanced   These skis have been received by all in the industry with great acclaim.  The hype had been built & these skis do not disappoint.  They are incredibly versatile & can cope with whatever is thrown at them. Thanks t


...

The Tracker is a low profile, lightweight helmet with the added styling of just the right amount of brim. Features include, 3-piece inner pads that are removable for washing & the M-R.A.S Fit System which make the Tracker a great option for the all-condition rider. Technology In Mold Technology The fusion process between the Microshell & the helmets EPS liner ensures performance in terms of impact resistance for a lighter & more ventilated helmet. M-R.A.S Fit System The Micro Rotary Adjustment System (M-R.A.S) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The M-R.A.S Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. SCOTT G-Vent System SCOTTs G-Vent system is the most advanced helmet venting system available & reduces goggle fogging while increasing helmet airflow. Intake vents placed on the helmet visor, just above the goggle, pull air through the goggle frame, removing stagnant air known to be the cause of goggle fogging. Stagnant air is then channeled away using exhaust vents located on top of the helmet. The result is a venting system that allows your goggle & helmet to breath more efficiently. Features 3-piece inner padding, removable & washable G-vent System on front 11 passive vents EVA vent plugs M-R.A.S Fit System Removable ear covers Soft goggle retainer strap Side release chinstrap buckle Comfort chinstrap Helmet pouch ...

The Tracker is a low profile, lightweight helmet with the added styling of just the right amount of brim. Features include, 3-piece inner pads that are removable for washing & the M-R.A.S Fit System which make the Tracker a great option for the all-condition rider. Technology In Mold Technology The fusion process between the Microshell & the helmets EPS liner ensures performance in terms of impact resistance for a lighter & more ventilated helmet. M-R.A.S Fit System The Micro Rotary Adjustment System (M-R.A.S) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The M-R.A.S Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. SCOTT G-Vent System SCOTTs G-Vent system is the most advanced helmet venting system available & reduces goggle fogging while increasing helmet airflow. Intake vents placed on the helmet visor, just above the goggle, pull air through the goggle frame, removing stagnant air known to be the cause of goggle fogging. Stagnant air is then channeled away using exhaust vents located on top of the helmet. The result is a venting system that allows your goggle & helmet to breath more efficiently. Features 3-piece inner padding, removable & washable G-vent System on front 11 passive vents EVA vent plugs M-R.A.S Fit System Removable ear covers Soft goggle retainer strap Side release chinstrap buckle Comfort chinstrap Helmet pouch Construction PC in-mold with EPS liner PC bottom wrap ...

The Tracker is a low profile, lightweight helmet with the added styling of just the right amount of brim. Features include, 3-piece inner pads that are removable for washing & the M-R.A.S Fit System which make the Tracker a great option for the all-condition rider. Technology In Mold Technology The fusion process between the  Microshell and the helmets EPS liner ensures performance in terms of impact resistance for a lighter & more ventilated helmet. M-R.A.S Fit System The Micro Rotary Adjustment System (M-R.A.S) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The M-R.A.S Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. SCOTT G-Vent System SCOTTs G-Vent system is the most advanced helmet venting system available & reduces goggle fogging while increasing helmet airflow. Intake vents placed on the helmet visor, just above the goggle, pull air through the goggle frame, removing stagnant air known to be the cause of goggle fogging. Stagnant air is then channeled away using exhaust vents located on top of the helmet. The result is a venting system that allows your goggle & helmet to breath more efficiently. Features 3-piece inner padding, removable & washable G-vent System on front 11 passive vents EVA vent plugs M-R.A.S Fit System Removable ear covers Side release chinstrap buckle Comfort chinstrap Helmet pouch Construction PC in-mold with EPS liner PC bottom wrap ...

The Tracker is a low profile, lightweight helmet with the added styling of just the right amount of brim. Features include, 3-piece inner pads that are removable for washing & the M-R.A.S Fit System which make the Tracker a great option for the all-condition rider. Technology In Mold Technology The fusion process between the  Microshell and the helmets EPS liner ensures performance in terms of impact resistance for a lighter & more ventilated helmet. M-R.A.S Fit System The Micro Rotary Adjustment System (M-R.A.S) offers unparalleled adjustment, comfort, & stability. Using an automatic lock system, the helmet is held securely in place. The M-R.A.S Fit System is built on a flexible structure providing added comfort when fitted on the rider’s head. SCOTT G-Vent System SCOTTs G-Vent system is the most advanced helmet venting system available & reduces goggle fogging while increasing helmet airflow. Intake vents placed on the helmet visor, just above the goggle, pull air through the goggle frame, removing stagnant air known to be the cause of goggle fogging. Stagnant air is then channeled away using exhaust vents located on top of the helmet. The result is a venting system that allows your goggle & helmet to breath more efficiently. Features 3-piece inner padding, removable & washable G-vent System on front 11 passive vents EVA vent plugs M-R.A.S Fit System Removable ear covers Soft goggle retainer strap Side release chinstrap buckle Comfort chinstrap Helmet pouch Construction PC in-mold with EPS liner PC bottom wrap ...

The SCOTT Unlimited OTG delivers on all fronts. A great fit for most faces, this classic goggle guarantees a wide field of vision while ensuring a perfect helmet & over-the-glasses fit. Goggle Technologies 2-Layer Molded Face Foam Deluxe, 2-layer open celled face foam has excellent moisture absorbing, & thermal properties, guaranteeing that you stay warm, dry, & comfortable all day. Silicone Line An adhered silicone strip on the inside of the gogglestrap ensures the goggles stay right where they should on a helmet or hat. Lens Technologies SCOTT Opti View These European manufactured lenses are made from polycarbonate ensuring comfort & high impact resistance. Scott’s proprietary injection molding process & hardcoat treatment guarantees that every Opti View lens is optically correct & distortion free. Scott Opti View lenses are available as spherical or cylindrical. No Fog Anti-Fog Lens Treatment SCOTT lenses undergo a permanent No Fog™ treatment process to prevent condensation & fogging. ACS
- Air Control System The ACS Air Control System is a technology already well-established in our Goggle range. ACS ventilation incorporates lens air intake vents on the lens. The result is a sophisticated ventilation system that helps prevent condensation & fogging.

Specification
Fit:  Optimised for prescription glasses Equipped Lens:  Amplifier
- Light Transmission: 32%
- Category 2
- The patented Amplifier lens is capable of deciphering exceptional detail in low light conditions while adapting perfectly for use on sunny days.






...