More From Contributor

With the PIEPS CHECKER it is possible to quickly check the transmitting function of any avalanche transceiver beacon. A beacon check is a standard safety measure on any tour outside of controlled areas. Easy avalanche transmitter check Check your own avalanche transmitter quickly Functional, small, easy to use
- An essential for a regular avalanche transceiver user & group tour member

Specification Transmission frequency: 457 k Hz Power supply: Li-Ion battery Battery lifetime: 5 years Maximum range: 100 cm Temperature range: -20°C to +45°C Weight: 19 Grams (including battery) Dimensions: 51mm x 35mm x 17 mm

...

Archived Product

The versatile Pieps DSP Sport is the ideal transceiver for ambitious ski tourers and off-piste skiers alike. A 50 metre range is combined with an intelligent transmitter for precise results when it matters. The optimised MARK function helps in multiple burial situations, & operating the transceiver is simple & clean with one single button during operation. 3 digital antennas allow for precision searching as you get closer to the target. TECHNICAL DATA Transmission frequency: 457 Khz Power Supply: 3 AAA Batteries
- Alklaline should be used Maximum Range: 50 Metres Search Strip

Width: 50 Metres Weight: 200 grams (Including Batteries) Dimensions: 115mm x 75mm x 28mm IN THE BOX Pieps DSP Sport Carrying Strap System Hand Loop 3 x AAA Batteries Manual Warranty
- 2 years
- extendable with online registration

...

Archived Product

The Pieps Freeride avalanche transceiver is a clean & simple digital 1-antenna transceiver ideal for those skiing off piste occasionally or doing the odd back country hike & ski. Very easy to use. The Freeride has an elliptical receiving range of up to 40 metres. A combination of a distinct acoustic signal & on screen arrow guide helps with efficicient searching. TECHNICAL DATA Transmission Frequency: 457 Khz Power Supply: 1 AA Alkaline Battery Battery Life: minimum 200 hours in send mode Maximum Range: 40 Metres Search Strip

Width: 30 Metres Weight: Only 110 grams, including battery

Size: 110mm x 58mm x 24mm IN THE BOX Pieps Freeride Transceiver Classic Carry Strap Manual 2 Year Warranty
- Register online

...

Archived Product

The PIEPS i PROBE ONE is the 260cm electronic probe that reduces the search time significantly with up to a 60% time saving! Maximum support for the rescuer in an emergency situation. Compatible with selected Pieps transceivers. Optical & acoustic target indicator for every standard transceiver & automatic deactivating function Clear & simple activating by pressing the ON/OFF button 3 times – all further handling is done automatically Probe tip with integrated receiver – locates every avalanche transmitter in range Multiple burials: The PIEPS i PROBE ONE deactivates within 8 seconds the strongest transmitting signal EN300718 of all beacons with i PROBE ONE Support
- Beacons with i PROBE ONE Support: PIEPS DSP PRO, PIEPS DSP SPORT, PIEPS DSP (with Software Version 5.0), PIEPS DSP TOUR, PIEPS FREERIDE

Specification Power supply: 1 AA battery, alkaline Battery lifetime: 150 hours Temperature range: -20°C to +45°C Weight: 390 Grams (including battery) Approaching range: 2 Metres Targeting range: from a maximum of 50 cm to 0 cm Probing-length (mechanical): 260 cm Probing-length (total): max. max. 310 cm

...

Archived Product

An excellent value for your money basic avalanche set comprising a Pieps Freeride single antenna transceiver, a 260cm ALU 260 ...

Archived Product

Ultra light & functional ski touring bindings based on the TECH binding system, to use with TECH compatible soles. The medium version indicates a DIN range of 5.5
- 12 DIN. 3 position heel riser, switchable with pole rotation on the heel piece. Innovating rotative system. No mater the position, you can always insert the tip of a ski pole into the wedge to switch to another position. Easy rotation with either h&. The extreme accuracy of CNC machines gives a high rigidity frame. In ski mode, the Guide will offer teh best control & quick reaction. 30mm adjustment rail to allow fine tuning of fit across 3-4 boot shell sizes. The binding also features a built-in crampon slot.

Specification Design: Forward & lateral release system: 5.5 to 12 Weight: 690g/pair (w/o screws). Ref: P-3000, sold in pair.

Colour: CNC machined silver Included: Mounting bolts & binding leash (elasticated) We have a PLUM binding fitting jig in our workshop to ensure perfect fit. Brakes are NOT included but can be purchased as an additional items & we also keep a range of spare parts in stock.

...

Archived Product

Ultra light & functional ski touring bindings based on the TECH binding system, to use with TECH compatible soles. The medium version indicates a DIN range of 3.5
- 7 DIN. 3 position heel riser, switchable with pole rotation on the heel piece. Innovating rotative system. No mater the position, you can always insert the tip of a ski pole into the wedge to switch to another position. Easy rotation with either h&. The extreme accuracy of CNC machines gives a high rigidity frame. In ski mode, the Guide will offer teh best control & quick reaction. 30mm adjustment rail to allow fine tuning of fit across 3-4 boot shell sizes. The binding also features a built-in crampon slot.

Specification Design: Forward & lateral release system: 3.5 to 7 Weight: 690g/pair (w/o screws). Ref: P-3000, sold in pair.

Colour: CNC machined silver anodised blue Included: Mounting bolts & binding leash (elasticated) We have a PLUM binding fitting jig in our workshop to ensure perfect fit. Brakes are NOT included but can be purchased as an additional items & we also keep a range of spare parts in stock.

...

Archived Product

The YAK Series is the heart of the PLUM range. The PLUM YAK is leading the Free-Ride tech-binding revolution. Manufactured out of high performance materials (Aluminium 7075 T6), the PLUM YAK is the lightest binding in its category. A binding specially designed to be mounted on wider skis (from 95mm Under foot), & totally re-designed for Free-Ride use. The YAK positions the boot at a flatter ramp angle, & the PLUM YAK is THE tech binding that performs as close to an alpine binding as you can get.

Specification Ultra light bindings made from the highest grade materials. 3 position heel riser, switchable with pole rotation on th hell piece: Highly innovating rotating system of the heel piece: No mater the position, you can always insert the tip of a ski pole into the wedge to switch to another position. Easy rotation with either h&. CNC machine accuracy gives a high rigidity frame. In ski mode, the YAK will offer the best control & quickest reaction thanks to the heel pad which stiffens the boot connection The hole pattern is more adapted to a mounting on skis 95mm waist & wider 30mm adjustment rail Built-in Crampon slot Forward & lateral release value 5.5 to 12 Raised toe-piece to reduce ramp angle Weight: 900g/pair without screws

...

Archived Product

For more aggressive skiing with the GUIDE binding & for heavier built skiers, the Plum Guide Heel Plates relieve the pressure on the two rear heel pins for increased strength & performance. As now fitted to the YAK bindings. These will mount to most GUIDE bindings from around 2011 onwards, if there is a small threaded hole at the front of the heel base plate, this is where these will mount. They are extremely light weight so for maximum protection of the heel piece we would suggest fitting these plates. Sold as a pair complete with mounting screw, & can be fitted & removed in seconds. ...

Archived Product

Genuine Plum Bindings GUIDE ski brakes, which mount to the front binding piece, to give ski security when you are on the mountain & avoids the need for binding leashes. This is the 100mm brake width for the Plum GUIDE binding system, & are sold a pair. ...

Archived Product

Pieps Pro Plus Avalanche Shovel With Integrated Snow Saw

The PIEPS SHOVEL PRO+ with integrated snow saw in the telescopic handle and extra large blade is the perfect tool for professional mountain guides. Perfect for snow layering analysis and bivouac building. The handle features an ergonomic shape for safe and secure grip and optimised digging. A special aluminium alloy and a special coating assure extreme durability as well as the lowest possible weight. FEATURES SHOVEL Ergonomic T-handle with oval profile avoids twisting while shovelling Rip Stop coating for perfect grip Quick lock without pressing the buttons that connect handle and blade Special surface coating and sharpened edges for easier cutting of hard and compressed snow Four holes for rescue purposes such as a sled A special aluminium alloy and a special coating assure extreme
durability as well as lowest possible weight Shovel blade width: 25 cm Telescopic handle length: 81 cm Shovel blade weight: 370 g Telescopic handle weight: 530 g SNOW SAW Special saw teeth for snow and wood Assembled inside the thin tube of the telescopic handle Measurement line in 5 cm steps Special steel alloy (High Carbon Steel) Length saw blade: 30 cm Total length saw: 74, 5 cm Weight: 460 g

Availability: Out Of Stock
Supplier: Edge And Wax
SKU: 1209015

Description Reviews / Comments Add New

Product Description

The PIEPS SHOVEL PRO+ with integrated snow saw in the telescopic handle & extra large blade is the perfect tool for professional mountain guides. Perfect for snow layering analysis & bivouac building. The handle features an ergonomic shape for safe & secure grip & optimised digging. A special aluminium alloy & a special coating assure extreme durability as well as the lowest possible weight. FEATURES SHOVEL Ergonomic T-handle with oval profile avoids twisting while shovelling Rip Stop coating for perfect grip Quick lock without pressing the buttons that connect handle & blade Special surface coating & sharpened edges for easier cutting of hard & compressed snow Four holes for rescue purposes such as a sled A special aluminium alloy & a special coating assure extreme durability as well as lowest possible weight Shovel blade

Width: 25 cm Telescopic handle length: 81 cm Shovel blade weight: 370 g Telescopic handle weight: 530 g SNOW SAW Special saw teeth for snow & wood Assembled inside the thin tube of the telescopic handle Measurement line in 5 cm steps Special steel alloy (High Carbon Steel) Length saw blade: 30 cm Total length saw: 74, 5 cm Weight: 460 g

Reviews/Comments

Add New

Jargon Buster

Aluminium - Corrosion resistant lightweight metal

Ergonomic - A specific design to fit the purpose of the user

Steel - An alloy made predominately of Iron combined with <2% carbon

Cm - Centimetres, one centimetre is equal to 10 milimetres

Carbon - A common element, in its simplest form is coal. The element can take different form from hard diamonds through graphite to soft carbon

blade - A flat part of a device which usually has a cutting edge

Wood - A hard material found in trees. Used for tool making, fuel and construction.

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

professional - A term used to describe products or people which may be focused on specialist educational training

cutting - The seperation of an object usually using a cutting tool such as a knife

Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon

Quick - Something that is fast

Large - something that takes up more space than normal.

Snow - Water and vapour in clouds that falls in a white crystal form leaving a white layer.

Professional - A person that is trained within a profession.

Width - The measurement of something from one side to the other.

Optimised - When a situation or item is improved or performance increased.

More From Contributor

Pieps Pro Plus Avalanche Shovel With Integrated Snow Saw

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account