More From Contributor

£54.00
The Marker Ski Touring Binding Crampon will fit any of the Marker touring bindings (Duke, Baron, F12 & F10). 113mm version Super light anodized aluminium crampon for the TOUR bindings as well as the hike & ride bindings. Contary to other systems the mounting position on the Tour bindings is right under the arch in order to provide maximum pressure & to ease hiking due to an optimal crampon position The crampon itself is folded aluminium with 3 teeth on each side. The binding fits onto the rear of the binding rails just below the brake. The crampon goes up & down with your foot but cannot be used at the same time as the heel lifters. Comes complete with storage bag for your crampons. Weight
- 119g per crampon
...
Archived Product
£99.00
The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the ?eld of vision is only minimally reduced. Its classical form, combined with the ?nest technical features, makes it a timeless “always & everywhere” goggle that ?ts every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in & out. FEATURES NMT OPTICS (3RD EYELID) NMT OPTICS is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease or dust from sticking, & moisture wicks away immediately.  Fingerprints, dust & sweat have no surface to cling to & are easy to remove. DUAL BIONOMIC SPHERICAL LENSES The DUAL BIONOMIC double lens construction combines 100% freedom from fogging with extreme scratch-resistance. The layer of air between the inner & outer lens functions as a thermal blocker & equalizes the temperature differences between the two. The goggles stay warm & dry inside for a fog-free environment. XDRY TRIPLE LAYER FACE FOAM Extremely comfortable & extra soft. The three-layer XDry construction helps produce an optimal ?t & top performance. The ?nishing touch is a ?eece layer that wicks off moisture and transports it away from the skin. INCLUDING 2 PERFORMANCE LENSES - including one for low-light conditions Features a frame construction, but thanks to the 4-point clip system lenses can be swapped in seconds. Mark AIR CHANNEL VENTILATION SYSTEM
- CLEAR VISION & A COOL HEAD All goggle frames are out?tted with the progressive Mark AIR VENT SYSTEM. Design & air ?ow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed ?ow of air is guaranteed along the helmet & its Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. SUPERFIT FRAME DESIGN MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45MM GOGGLES STRAP WITH SILICON ANTI-SLIP COATING MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. ALSO AVAILABLE WITH POLARIZED LENSES Polarized MARKER lenses made from TAC (Tri Acetate Cellulose) stand out for a visual precision superior to other lenses. They absorb a maximum of dispersed light to provide for an extreme contrast boost. The result is a re?e
...
Archived Product
£70.95
The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the ?eld of vision is only minimally reduced. Its classical form, combined with the ?nest technical features, makes it a timeless “always & everywhere” goggle that ?ts every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in & out. FEATURES NMT OPTICS (3RD EYELID) NMT OPTICS is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease or dust from sticking, & moisture wicks away immediately.  Fingerprints, dust & sweat have no surface to cling to & are easy to remove. DUAL BIONOMIC SPHERICAL LENSES The DUAL BIONOMIC double lens construction combines 100% freedom from fogging with extreme scratch-resistance. The layer of air between the inner & outer lens functions as a thermal blocker & equalizes the temperature differences between the two. The goggles stay warm & dry inside for a fog-free environment. XDRY TRIPLE LAYER FACE FOAM Extremely comfortable & extra soft. The three-layer XDry construction helps produce an optimal ?t & top performance. The ?nishing touch is a ?eece layer that wicks off moisture and transports it away from the skin. INCLUDING 2 PERFORMANCE LENSES - including one for low-light conditions Features a frame construction, but thanks to the 4-point clip system lenses can be swapped in seconds. Mark AIR CHANNEL VENTILATION SYSTEM
- CLEAR VISION & A COOL HEAD All goggle frames are out?tted with the progressive  Mark AIR VENT SYSTEM. Design & air ?ow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed ?ow of air is guaranteed along the helmet & its  Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. SUPERFIT FRAME DESIGN MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN  (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45MM GOGGLES STRAP WITH SILICON ANTI-SLIP COATING MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN  (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. ALSO AVAILABLE WITH POLARIZED LENSES
...
Archived Product
£64.95
The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the field of vision is only minimally reduced. Its classical form, combined with the finest technical features, makes it a timeless “always & everywhere” goggle that fits every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in & out. The Red Plasma mirror lens is complimented by a low light lens, with easy changing. Marker has developed the revolutionary NMT OPTICS coating. It works similarly to the extra membrane or third eyelid that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) have an extremely scratch-resistant surface that always supplies the best possible clarity. It prevents water, grease, or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to, & are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented to the curvature of the human eye to ensure that objects seen through the goggles are accurately represented & undistorted. Unlike traditional, non-progressively tapered standard lenses, our lenses feature Bionomic Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn’t strain the eye. All goggle frames are outfitted with the progressive Mark AIR VENT SYSTEM. Design & air flow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed flow of air is guaranteed along the helmet & its Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. The Marker 16:9 goggles come in a lightweight neoprene box with a zipper to make transport & storage easier. The soft lining protects the goggles, while the vent holes allow for quick moisture evaporation.   ...
Archived Product
£61.95
The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the field of vision is only minimally reduced. This is the Gumball Aqua colour option. Its classical form, combined with the finest technical features, makes it a timeless “always & everywhere” goggle that fits every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in & out. The Surround mirror lens is complimented by a low light lens, with easy changing. Marker has developed the revolutionary NMT OPTICS coating. It works similarly to the extra membrane or third eyelid that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) have an extremely scratch-resistant surface that always supplies the best possible clarity. It prevents water, grease, or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to, & are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented to the curvature of the human eye to ensure that objects seen through the goggles are accurately represented & undistorted. Unlike traditional, non-progressively tapered standard lenses, our lenses feature  Bionomic  Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn’t strain the eye. All goggle frames are outfitted with the progressive  Mark AIR VENT SYSTEM. Design & air flow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed flow of air is guaranteed along the helmet & its  Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. The Marker 16:9 goggles come in a lightweight neoprene box with a zipper to make transport & storage easier. The soft lining protects the goggles, while the vent holes allow for quick moisture evaporation.   ...
Archived Product
£99.00
The superlative combination of performance and ultimate protection. AMPIRE OTIS is the flagship model for the new program & is the benchmark for all other helmets on the market. Beyond the many overall benefits of the AMPIRE, the OTIS offers the unique ORTEMA X4 PROTECTION PADS. These shock absorbers are composed of special foam & are resistant to temperature swings; they sit on the critical areas of the back of the head, forehead & temples and provide a significant boost to protection.  MARKER is the first helmet maker to implement this innovative material that regains its initial form in an instant after impact to ensure optimal performance even when faced with multiple impacts. Put on the AMPIRE OTIS & you’re optimally equipped for the steepest & most jaw-dropping backcountry lines you can find! Features ORTEMA X4 PROTECTION PADS Rear of head, forehead & temples are padded with the revolutionary X4 Pads. Regardless of the temperature, the material guarantees maximum shock absorption & top protection in the event of a crash as the memory function of the special foam reforms into its original volume following each impact. ORTEMA X4 PROTECTION PADS adapt optimally to the skier’s individual head shape & can of course be removed for cleaning. Mark AIR CHANNEL SYSTEM Highly engineered temperature regulation comprised of a network of vent openings & air channels. The Mark AIR CHANNEL SYSTEM literally sucks the warm, moist air out of the goggles,  while at the same time creating a pleasant, constant flow of air that floods through the overall system & controls it automatically. RTS FIT SYSTEM The three-point construction on the rear of the head adapts to your personal head shape in seconds thanks to the adjustment dial. For greatest possible wearing comfort, a tight fit and boosted safety. One-handed operation, even with a ski glove on. HYBRID SHELL CONSTRUCTION The best of both worlds for maximum security requirements: the HYBRID SHELL CONSTRUCTION combines the weight & comfort advantages of in-mold technology with the robustness of the hard shell construction. In the event of a crash, the hard shell is not just highly durable, but also distributes the pressure across its surface. The extra-light in-mold shell for the lower head wraps around the entire rear of the head to provide optimal protection. The final product is a premium helmet featuring state-of-the-art technology, a low total weight, outstanding comfort & an ABS outer shell for maximum durability, top ventilation & a fine look that will remain attractive even after hard use. 2 POSITION CLIMATE CONTROL The ventilation within the helmet can be controlled using the adjustable 2 POSITION CLIMATE CONTROL (partially or fully closed).  This works even with gloves on & while in motion! Move the slider to control the air volumes to match our own personal warmth preferences. Naturally the Mark Air CHANNEL SYSTEM will assist keeping your head warm & dry even if the controls are fully shut. When fully opened, the special vent design prevents the head from growing chilled. Xdry PERFORMANCE LINING Technical performance lining that ensures optimal thermal efficiency. The textured material insulates against cold &, in the event of excess heat, the air is transported to the exterior.  Beyond this, moisture is wicked outwards to prevent excessive sweating.

Features:
antibacteria

...
Archived Product
£125.00
The superlative combination of performance and ultimate protection. AMPIRE OTIS is the flagship model for the new program & is the benchmark for all other helmets on the market. Beyond the many overall benefits of the AMPIRE, the OTIS offers the unique ORTEMA X4 PROTECTION PADS. These shock absorbers are composed of special foam & are resistant to temperature swings; they sit on the critical areas of the back of the head, forehead & temples and provide a significant boost to protection.  MARKER is the first helmet maker to implement this innovative material that regains its initial form in an instant after impact to ensure optimal performance even when faced with multiple impacts. Put on the AMPIRE OTIS & you’re optimally equipped for the steepest & most jaw-dropping backcountry lines you can find! Features ORTEMA X4 PROTECTION PADS Rear of head, forehead & temples are padded with the revolutionary X4 Pads. Regardless of the temperature, the material guarantees maximum shock absorption & top protection in the event of a crash as the memory function of the special foam reforms into its original volume following each impact. ORTEMA X4 PROTECTION PADS adapt optimally to the skier’s individual head shape & can of course be removed for cleaning. Mark AIR CHANNEL SYSTEM Highly engineered temperature regulation comprised of a network of vent openings & air channels. The Mark AIR CHANNEL SYSTEM literally sucks the warm, moist air out of the goggles,  while at the same time creating a pleasant, constant flow of air that floods through the overall system & controls it automatically. RTS FIT SYSTEM The three-point construction on the rear of the head adapts to your personal head shape in seconds thanks to the adjustment dial. For greatest possible wearing comfort, a tight fit and boosted safety. One-handed operation, even with a ski glove on. HYBRID SHELL CONSTRUCTION The best of both worlds for maximum security requirements: the HYBRID SHELL CONSTRUCTION combines the weight & comfort advantages of in-mold technology with the robustness of the hard shell construction. In the event of a crash, the hard shell is not just highly durable, but also distributes the pressure across its surface. The extra-light in-mold shell for the lower head wraps around the entire rear of the head to provide optimal protection. The final product is a premium helmet featuring state-of-the-art technology, a low total weight, outstanding comfort & an ABS outer shell for maximum durability, top ventilation & a fine look that will remain attractive even after hard use. 2 POSITION CLIMATE CONTROL The ventilation within the helmet can be controlled using the adjustable 2 POSITION CLIMATE CONTROL (partially or fully closed).  This works even with gloves on & while in motion! Move the slider to control the air volumes to match our own personal warmth preferences. Naturally the Mark Air CHANNEL SYSTEM will assist keeping your head warm & dry even if the controls are fully shut. When fully opened, the special vent design prevents the head from growing chilled. Xdry PERFORMANCE LINING Technical performance lining that ensures optimal thermal efficiency. The textured material insulates against cold &, in the event of excess heat, the air is transported to the exterior.  Beyond this, moisture is wicked outwards to prevent excessive sweating.

Features:
antibacteria

...
Archived Product
£132.95
Everything about the 3D+ OTIS is new, with one innovation after another. Introducing a completely new lens & clasp system that is the quickest & easiest lens-changing system in our collection. This CONVERTIBLE LENS TECHNOLOGY eliminates the annoying fumbling associated with lens changes. The three-point  Click-In´n´ Lock system allows for lightning-fast lens swaps. 3D+ OTIS models are the first goggles to add an integrated 3mm MAP PROTECTION layer to the extremely soft, triple-layer  Xdry face foam. During a crash it absorbs impacts, protecting the sensitive areas around the eye sockets & cheekbones. The flexible MAP layer molds itself perfectly to the shape of the face, ensuring that the goggles sit just right. Technologies Convertible Lens Technology A revolutionary lens fastening system for lightning-quick changes. The three-point closure system with supplemental magnet clasp works effortlessly, even when you leave your gloves on. Simply snap in the lens & the special hooks then hold it securely in place. All 3D+ OTIS are delivered with an additional Clarity mirrored lens for use in low light conditions. Xdry  Triple Layer MAP Face Foam Extremely comfortable & extra soft! The three-layer XDry construction helps produce an optimal fit & outstanding performance. The soft external fleece layer that touches the face absorbs moistures & transports it away from the skin. NMT  Optics (3rd  Eyelid) Marker has developed the revolutionary NMT OPTICS coating for all lenses (except 4:3). It works similarly to the extra membrane or third eyelid that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) have an extremely scratch-resistant surface that always supplies the best possible clarity. It prevents water, grease, or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to, & are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. Mark AIR  Vent System All goggle frames are outfitted with the progressive  Mark AIR VENT SYSTEM. Design & air flow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed flow of air is guaranteed along the helmet & its  Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. Dual  Bionomic  Spherical Lenses MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented to the curvature of the human eye to ensure that objects seen through the goggles are accurately represented & undistorted. Unlike traditional, non-progressively tapered standard lenses, our lenses feature  Bionomic  Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn’t strain the eye. Superfit  Frame Design MARKER goggles feature optimally fitted foam for superior comfort & functionality. The goggles automatically hug the contour of the wearer’s face & with ELASTROGRAN it retains its full flexibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure unmatched fit, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45mm  Strap with Silicon Anti-Slip Coating The high-quality, durable goggle straps distribute the pressure around the hea ...
Archived Product
£132.95
Everything about the 3D+ OTIS is new, with one innovation after another. Introducing a completely new lens & clasp system that is the quickest & easiest lens-changing system in our collection. This CONVERTIBLE LENS TECHNOLOGY eliminates the annoying fumbling associated with lens changes. The three-point  Click-In´n´ Lock system allows for lightning-fast lens swaps. 3D+ OTIS models are the first goggles to add an integrated 3mm MAP PROTECTION layer to the extremely soft, triple-layer  Xdry face foam. During a crash it absorbs impacts, protecting the sensitive areas around the eye sockets & cheekbones. The flexible MAP layer molds itself perfectly to the shape of the face, ensuring that the goggles sit just right. Technologies Convertible Lens Technology A revolutionary lens fastening system for lightning-quick changes. The three-point closure system with supplemental magnet clasp works effortlessly, even when you leave your gloves on. Simply snap in the lens & the special hooks then hold it securely in place. All 3D+ OTIS are delivered with an additional Clarity mirrored lens for use in low light conditions. Xdry  Triple Layer MAP Face Foam Extremely comfortable & extra soft! The three-layer XDry construction helps produce an optimal fit & outstanding performance. The soft external fleece layer that touches the face absorbs moistures & transports it away from the skin. NMT  Optics (3rd  Eyelid) Marker has developed the revolutionary NMT OPTICS coating for all lenses (except 4:3). It works similarly to the extra membrane or third eyelid that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) have an extremely scratch-resistant surface that always supplies the best possible clarity. It prevents water, grease, or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to, & are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. Mark AIR  Vent System All goggle frames are outfitted with the progressive  Mark AIR VENT SYSTEM. Design & air flow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed flow of air is guaranteed along the helmet & its  Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. Dual  Bionomic  Spherical Lenses MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented to the curvature of the human eye to ensure that objects seen through the goggles are accurately represented & undistorted. Unlike traditional, non-progressively tapered standard lenses, our lenses feature  Bionomic  Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn’t strain the eye. Superfit Frame Design MARKER goggles feature optimally fitted foam for superior comfort & functionality. The goggles automatically hug the contour of the wearer’s face & with ELASTROGRAN it retains its full flexibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure unmatched fit, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45mm Strap with Silicon Anti-Slip Coating The high-quality, durable goggle straps distribute the pressure around the head for the ...
Archived Product
£132.95
Everything about the 3D+ OTIS is new, with one innovation after another. Introducing a completely new lens & clasp system that is the quickest & easiest lens-changing system in our collection. This CONVERTIBLE LENS TECHNOLOGY eliminates the annoying fumbling associated with lens changes. The three-point Click-In´n´ Lock system allows for lightning-fast lens swaps. 3D+ OTIS models are the first goggles to add an integrated 3mm MAP PROTECTION layer to the extremely soft, triple-layer Xdry face foam. During a crash it absorbs impacts, protecting the sensitive areas around the eye sockets & cheekbones. The flexible MAP layer molds itself perfectly to the shape of the face, ensuring that the goggles sit just right. Technologies Convertible Lens Technology A revolutionary lens fastening system for lightning-quick changes. The three-point closure system with supplemental magnet clasp works effortlessly, even when you leave your gloves on. Simply snap in the lens & the special hooks then hold it securely in place. All 3D+ OTIS are delivered with an additional Clarity mirrored lens for use in low light conditions. Xdry Triple Layer MAP Face Foam Extremely comfortable & extra soft! The three-layer XDry construction helps produce an optimal fit & outstanding performance. The soft external fleece layer that touches the face absorbs moistures & transports it away from the skin. NMT Optics (3rd Eyelid) Marker has developed the revolutionary NMT OPTICS coating for all lenses (except 4:3). It works similarly to the extra membrane or third eyelid that many animals have to provide extra protection to their eyes. NMT OPTICS (Nictitating Membrane Technology) have an extremely scratch-resistant surface that always supplies the best possible clarity. It prevents water, grease, or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to, & are easy to remove. Our NMT-coated lenses offer crystal-clear visibility for years. Mark AIR  Vent System All goggle frames are outfitted with the progressive Mark AIR VENT SYSTEM. Design & air flow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed flow of air is guaranteed along the helmet & its Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. Dual Bionomic Spherical Lenses MARKER DUAL BIONOMIC lenses are designed in a double-lens construction with an integrated thermal blocker. All lenses are oriented to the curvature of the human eye to ensure that objects seen through the goggles are accurately represented & undistorted. Unlike traditional, non-progressively tapered standard lenses, our lenses feature Bionomic Curve Lens Technology (quality class 1, ANSI Z87.1) that deliver undistorted light beams directly to the eye, which ensures 100% correct vision that doesn’t strain the eye. Superfit Frame Design MARKER goggles feature optimally fitted foam for superior comfort & functionality. The goggles automatically hug the contour of the wearer’s face & with ELASTROGRAN it retains its full flexibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure unmatched fit, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45mm Strap with Silicon Anti-Slip Coating The high-quality, durable goggle straps distribute the pressure around the head for the perfect hold without irritating pressure points. Thanks to the heat applied silicon coating on the interior of the goggle straps, they ...
Archived Product

Marker 16:9 Plus 2015 Ski And Snowboard Goggles White Frame

The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the ?eld of vision is only minimally reduced. Its classical form, combined with the ?nest technical features, makes it a timeless “always and everywhere” goggle that ?ts every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in and out. FEATURES NMT OPTICS (3RD EYELID) NMT OPTICS is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease or dust from sticking, and moisture wicks away immediately. Fingerprints, dust and sweat have no surface to cling to and are easy to remove. DUAL BIONOMIC SPHERICAL LENSES The DUAL BIONOMIC double lens construction
combines 100% freedom from fogging with extreme scratch-resistance. The layer of air between the inner and outer lens functions as a thermal blocker and equalizes the temperature differences between the two. The goggles stay warm and dry inside for a fog-free environment. XDRY TRIPLE LAYER FACE FOAM Extremely comfortable and extra soft. The three-layer XDry construction helps produce an optimal ?t and top performance. The ?nishing touch is a ?eece layer that wicks off moisture and transports it away from the skin. INCLUDING 2 PERFORMANCE LENSES - including one for low-light conditions Features a frame construction, but thanks to the 4-point clip system lenses can be swapped in seconds. MarkAIR CHANNEL VENTILATION SYSTEM - CLEAR VISION AND A COOL HEAD All goggle frames are out?tted with
the progressive MarkAIR VENT SYSTEM. Design and air ?ow are engineered simultaneously so that there is perfect lens ventilation and the unobstructed ?ow of air is guaranteed along the helmet and its MarkAIR CHANNEL SYSTEM. This keeps the inside of the lenses dry and fog-free. The breathable foam behind the inlets and outlets reliably resist the penetration of snow and moisture. SUPERFIT FRAME DESIGN MARKER goggles stand out for their perfectly ?tting form and top functionality. The shape of the goggles frames and the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of
how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, and seal without pinching or pressing. 45MM GOGGLES STRAP WITH SILICON ANTI-SLIP COATING MARKER goggles stand out for their perfectly ?tting form and top functionality. The shape of the goggles frames and the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically,
and seal without pinching or pressing. ALSO AVAILABLE WITH POLARIZED LENSES Polarized MARKER lenses made of TAC (Tri Acetate Cellulose) stand out for a visual precision superior to other lenses. They absorb a maximum of dispersed light to provide for an extreme contrast boost. The result is a re?ection-free, more clearly de?ned view that allows you to see and assess the terrain more effectively. 100% COMPATIBILITY WITH HELMET The perfect blend of helmet
RIP - This product is no longer available on our network. It was last seen on 26.10.2016

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£70.95

Product Description

The 16:9 has less frame, more lens. It offers all the advantages of the BIG PICTURE, but in a somewhat smaller package – although the ?eld of vision is only minimally reduced. Its classical form, combined with the ?nest technical features, makes it a timeless “always & everywhere” goggle that ?ts every face shape. All 16:9+ are delivered with interchangeable lenses that are easy to swap in & out. FEATURES NMT OPTICS (3RD EYELID) NMT OPTICS is an extremely scratch-resistant surface that always supplies the best possible visibility. It prevents water, grease or dust from sticking, & moisture wicks away immediately. Fingerprints, dust & sweat have no surface to cling to & are easy to remove. DUAL BIONOMIC SPHERICAL LENSES The DUAL BIONOMIC double lens construction combines 100% freedom from fogging with extreme scratch-resistance. The layer of air between the inner & outer lens functions as a thermal blocker & equalizes the temperature differences between the two. The goggles stay warm & dry inside for a fog-free environment. XDRY TRIPLE LAYER FACE FOAM Extremely comfortable & extra soft. The three-layer XDry construction helps produce an optimal ?t & top performance. The ?nishing touch is a ?eece layer that wicks off moisture & transports it away from the skin. INCLUDING 2 PERFORMANCE LENSES
- including one for low-light conditions Features a frame construction, but thanks to the 4-point clip system lenses can be swapped in seconds. Mark AIR CHANNEL VENTILATION SYSTEM
- CLEAR VISION & A COOL HEAD All goggle frames are out?tted with the progressive Mark AIR VENT SYSTEM. Design & air ?ow are engineered simultaneously so that there is perfect lens ventilation & the unobstructed ?ow of air is guaranteed along the helmet & its Mark AIR CHANNEL SYSTEM. This keeps the inside of the lenses dry & fog-free. The breathable foam behind the inlets & outlets reliably resist the penetration of snow & moisture. SUPERFIT FRAME DESIGN MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. 45MM GOGGLES STRAP WITH SILICON ANTI-SLIP COATING MARKER goggles stand out for their perfectly ?tting form & top functionality. The shape of the goggles frames & the materials used in the goggles play a decisive role in this. We manufacture all SUPERFIT FRAMES from highelastic ELASTOGRAN (Made in Germany), which means the goggles automatically hug the contour of the wearer’s face. ELASTROGRAN retains its full ?exibility regardless of how cold it is outside. The MARKER V-SPLIT NOSE also helps ensure that these goggles ?t like no other, as they adapt to the shape of the nose automatically, & seal without pinching or pressing. ALSO AVAILABLE WITH POLARIZED LENSES Polarized MARKER lenses made from TAC (Tri Acetate Cellulose) stand out for a visual precision superior to other lenses. They absorb a maximum of dispersed light to provide for an extreme contrast boost. The result is a re?ection-free, more clearly de?ned view that means that you can see & assess the terrain more effectively. 100% COMPATIBILITY WITH HELMET The perfect blend of helmet

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LENS - An optical element which converges or diverges light
Foam - A stubstance formed by trapping air in a solid or liquid
Helmet - A form of protection worn on the head to prevent injury
White - A colour combining all colours
Dry - A term used to describe an item with has little or no water present
Dry - A term used in wine making to describe the lack of sugar (sweetness)
water - A chemical substance. Chemical formula H2O.
Germany - A country in Central Europe.
soft - A descriptive word for an item/sound which is gentle to the touch or ears
Dust - A general term used for micro particles in the atmosphere
Skin - The largest organ on a human. Its main purpose is to keep liquids inside the body.
Resistant - Something that can repel against something.
Snow - Water and vapour in clouds that falls in a white crystal form leaving a white layer.
Ventilation - Giving fresh air to a room on someone's lungs.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
technical - Something that relates to a good level of skill and methods.
Design - A drawing or styles that shows the look and functionality of something before its made.
Engineered - Something that is developed and created by specialists (engineers).
Goggles - A protective form of eye ware to cover the eyes, also someone who stares in amazement or wonder.
Blend - To mix or combine together substances.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Head - The upper part of a body typically separated by the neck.
Vision - To be able to imagine, also can mean what you can see.
Environment - The conditions and surrounding area.

Supplier Information

Edge And Wax
Page Updated: 2015-04-11 04:04:33

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu