The award winning Mountain Twin is the board for fun hoggin’ freestylers and freeriders who want one board that can do it all. Versatility only matched by its performance & durability making it the standout board. It’s designed to shred the entire mountain like it’s your own personal skate park without sacrificing high-speed, line-bombing stability. Rocker tip & tail give the Mountain Twin float & finesse in soft snow while camber underfoot combined with Mellow Magne-Traction give the Mountain Twin snap & hold on hard pack.   ...

Ideal for Expert Freestyle & All-Mountain Carving. the award winning Aviator is the samurai sword of the Jones quiver. This razor sharp directional freestyle board is a team rider favorite & was built for premier stability on the ground or in the air. The nimble handling & supersonic acceleration of the Aviator result from the 3D Power Camber profile. 3D Power Camber is an innovative positive camber profile that offers the insane edge response of camber without the usual hang-ups. The board profile crosses over into the third dimension as the base is beveled up at the edges from the contact points of the camber to the ends of the board. The 3D base beveling releases the edges where they like to hook which balances the pop & directional stability of camber with a looser, less-catchy feel. NEW for 2015, the Aviato features Triax Carbon fiberglass for added snap & pop. Features 3D Power Camber An innovative traditional camber profile tweaked to offer the insane edge response of camber without the usual hang-ups. The board profile crosses over into the third dimension as the base is beveled up at the edges from the contact points of the camber to the ends of the board. The base beveling releases the edges where they like to hook which balances the pop & directional stability of camber with a looser, less-catchy feel. Mellow Magne-Traction Like a serrated knife slicing into the snow, Magne-Traction improves your edge grip by adding multiple contact points along the running length of your board. “ Magne-Traction is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock into your turns & hold a solid edge. Magne-Traction is crucial to offset the edge drift of rocker.“
- Jeremy Jones Blunt Nose Shaping “ How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point & just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer board without the ‘snow plow’ rounded tip & it’s extra swing weight.“
- Jeremy Jones Progressive  Sidecut At the far ends of the side cut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the side cut radius towards the contact point delivers smoother turn initiation & exit as the edge tracks in & out of the snow with a less abrupt transition. Colours Red: 160cm Blue: 162cm

...

Freeride & big mountain freestyle is what the Flagship is built for. You just have to watch Jeremy Jones dropping the hardest lines in the most unforgiving of terrain to get an idea of what he requires from the snowboard he rides. The Mellow Magnetraction will cling onto steep faces & the Carbon Quadrax keeps the board stable at mach ten speeds as well as providing endless pop. Specification: Profile: Directional Rocker Running length: 117 cm Waist

Width: 25.0 cm Sidecut radius: 9.1 Setback: 35mm Flex: Not specified (Specification based on the 161cm board) Note: Base colour combinations vary & are supplied at random

Features: Directional Rocker is designed to reduce the most common kinds of falls that occur when freeriding. It is a hybrid rocker/camber profile with more rocker at the nose than the tail. The increased nose rocker improves float in soft & slushy snow & reduces the chance of nose diving when landing in powder. The less rockered tail maintains power while the slight camber between the bindings increases edge hold & response. By increasing the number of contact points along the edge Mellow Magne-traction improves edge grip. This is especially valuable when combined with a rocker profile as it combats the looser nature of the board which is a result of the raised tip & tail contact points. The benefit of a Blunt Nose shape is the increased surface area at the front of the board without having to increase the board length. Essentially you can ride a shorter board, get the same amount of float, reduce swing weight & increase manoeuvrability. Super light poplar stringers are used in the middle of the core & these are framed with super tough Beech stringers under the edges. The Hard Core is Jones’ signature core & the combination of woods provides a snappy even flex, with the damp yet responsive energy transfer at the edges. All Jones boards feature full tip-to-tail a FSC Wood Core. A combination of multi-layered, multi-axis fibreglass is meshed with dual-zone carbon fibre power bands to make up the Carbon Quadrax laminate. The power bands in both the nose & tail provide loads of snap & keep the board stable at high speeds. In an effort to reduce waste, Jones alternate base graphic colours. Be aware that the colour combination on the base may differ from that shown in the picture on boards that feature the Flip Flop Base. Sintered Bases absorb more wax & glide further. The Wood Topsheet dampens the feel of the board & reduces chatter whilst reducing the use of plastic & lacquer. Stronger Edges are a lot more resistant to impact damage than the typical snowboard edge – about 250% more resistant. They say it’s all in the details & Jones haven’t overseen any of them. A Stone Ground base creates a defined structure which improves wax absorption & glide. The Flagship really comes to life when it’s ridden hard & fast & on challenging terrain. I think there is a noticeable improvement to edge grip on boards that feature Magnetraction (if well maintained), which is especially noticeable on very hard



...

You’d be forgiven for thinking the Hovercraft was a one trick pony. The super directional shape with that stubby tail is definitely designed to make the very most out of those epic days that we all dream about. The stiff tail & mellow-magnetraction provides the stability when snow stops falling. The Hovercraft is designed to be ridden 6-8cm shorter than your average snowboard. Specification: Profile: Directional Rocker Running length: 118cm Waist

Width: 260mm Sidecut radius: 9.3 Setback: 30 (Specification based on the 156cm board) Note: Base colour combinations may vary & are supplied at random

Features: Directional Rocker is designed to reduce the most common kinds of falls that occur when freeriding. It is a hybrid rocker/camber profile with more rocker at the nose than the tail. The increased nose rocker improves float in soft & slushy snow & reduces the chance of nose diving when landing in powder. The less rockered tail maintains power while the slight camber between the bindings increases edge hold & response. By increasing the number of contact points along the edge Mellow Magne-traction improves edge grip. This is especially valuable when combined with a rocker profile as it combats the looser nature of the board which is a result of the raised tip & tail contact points. The benefit of a Blunt Nose shape is the increased surface area at the front of the board without having to increase the board length. Essentially you can ride a shorter board, get the same amount of float, reduced swing weight & increased manoeuvrability. Super light poplar stringers run tip to tail in the Classic Core. With a predictable flex, tons of pop & a buttery board feel this high-performance core delivers a snappy ride with even response. All Jones boards feature full tip-to-tail a FSC Wood Core. Biax is a dual direction, dual layer, stitched fibreglass laminate. Its tensile strength, reliability & snappy response provide a fun & forgiving ride. In an effort to reduce waste, Jones alternate base graphic colours. Be aware that the colour combination on the base may differ from that shown in the picture on boards that feature the Flip Flop Base. Sintered Bases absorb more wax & glide further. The Wood Topsheet dampens the feel of the board & reduces chatter whilst reducing the use of plastic & lacquer. Stronger Edges are a lot more resistant to impact damage than the typical snowboard edge – about 250% more resistant. What Jeremy has done with the Hovercraft is to produce a powder board that can be ridden in all conditions. The short tail & set-back definitely took a little getting used to on the slushy, cruddy snow that I rode it on, but that is part of the appeal. This isn’t your regular snowboard & gives you a gentle nudge to get out of your comfort zone a little & see just what’s possible.  Is it for me? For the intermediate to advanced powder junkie that doesn’t want the fun to stop when the fresh snow has been fully tracked out. Remember that the Hovercraft is designed to be ridden 6-8cm shorter than your regular s



...

Junior Polar BUFF® is created by joining a Junior BUFF® to a cylindrical piece of Polartec® Classic 100® fleece fabric. In cold weather, Junior Polar BUFF® will help maintain body temperature & prevent heat loss. Super soft to the touch, you will love wearing Junior Polar BUFF®. USES Junior Polar BUFF® can be worn as a neckerchief, hairb&, headb&, mask, balaclava, scarf, pirate hat, cap or beanie. TECHNICAL FEATURES Made from 100% polyester microfibre & Polartec® Classic 100® fleece, Junior Polar BUFF® weighs 52g/1.8 oz & measures 47cm x 22.5cm/18.5 x 8.8 (microfibre section), 23.5cm x 22.5cm/9.2 x 8.8 (fleece section).  Junior Polar BUFF® fits young people aged 5
- 10 years with a head circumference of 50
- 55cm/19.6
- 21.6 Junior Polar BUFF® is machine washable, non iron & wont lose its elasticity or fade. Treated with Polygiene® your BUFF® headwear will remain fresh as the silver ions prevent the build up of bacteria in the fabric Certified to meet Oeko-Tex® Standard 100


...

For the winter sports enthusiast who thinks they have everything, the Jibber comes along to prove them wrong! A fully functional side edge touch-up tool with a quality diamond file, is combined with a fully functional bottle opener! Detail: Side Edge tool with Diamond File Capacity: As many as you can open Our Opinion We have regularly used the bottle opening function & can vouch that it is very effective on the small french bottles of beer. The side edge diamond file is a handy tool for removing burrs straight away out on the mountain. Is This For Me? Great on the mountain, in the chalet, or in the kitchen drawer, so go on, treat yourself or a loved one! ...