Magma is part of the new Data Wax high performance grade range of waxes that are perfect for racing or the park (or just maximum enjoyment). Magma is best on new snow both on & off the piste. It has a higher “fluoro” content for faster glide, rapid acceleration & longer lasting protection. Perfect for mid-season use. Mixes well with other waxes. Item
Specification Best Snow Temperature: 0o C to -8oC Iron-on Temperature: 110oC
Colour: Red Weight: 110g Block Iron on Wax Instructions 1) Set the iron to the correct temperature for the wax you have chosen. 2) Gently press your chosen wax against the hot waxing iron. 3) Keep the iron 4 inches above the base then move the iron with the wax dripping from it the full length from tip to tail. 4) Ensure the iron doesn’t smoke as this means it is too hot & you are burning the wax. 5) Gently place the iron onto the tip & using long smooth strokes from tip to tail iron the wax into the base. 6) IMPORTANT! Make sure that you always keep the iron moving (this prevents the base from melting & the ski/board being unusable). 7) Use long, smooth & slow passes along the base without any downward pressure until you have a smooth, thin layer of wax across the whole surface of the base. 8) Finish with one long pass along the full length of the base with the iron (to make scraping easier) 9) Leave the base to cool for 15 minutes minimum, 45 minutes if possible.